13 December 2021 in ACS Applied Materials & Interfaces
7 June 2022 in RSC Advances
The thermophysical properties of the novel phase change composites formed by simultaneously packing octadecane and gallium with expanded graphite as carrier can be adjusted in a wide range, creating more options for related fields.
8 April 2024 in Applied Physics Reviews
The hybrid structure of liquid metal units and organic elastomer has huge potential in achieving stretchable and reversible stiffness regulation, while such tuning is often restrained by high energy consumption for liquid metal solidification. Here, we conceive to solve the above challenge through introducing the fully leveraging interaction between supercooled liquid metal and homocrystal seeds within silicone elastomer. It is disclosed that the supercooled liquid metal-elastomer can maintain an extremely stable soft state until the supercooling is eliminated by modulating the mechanical force and elastomer deformation. This circumvents the utilization of intricate refrigeration equipment and offers a highly efficient and concise strategy for stiffness regulation. Moreover, conceptual experiments were performed to demonstrate the practical values of this technology through designing and testing the new shape memory materials, temperature-sensitive switches, and controlled circuits. The solidification mechanisms of supercooled Ga triggered by homocrystal seeds were interpreted. Overall, the present finding has generalized purposes and holds promise to significantly extend the theoretical and technological categories of classical stiffness tunable materials.
16 October 2024 in Journal of Applied Physics
Liquid metal phase change materials have the advantages of high thermal conductivity and high volumetric latent heat, which are expected to address the growing challenges of thermal management of advanced electronics. In previous studies, the effect of radiative heat transfer from fins of a phase change heat sink on thermal management performance has rarely been considered. In this study, radiative coating materials with high emissivity were prepared and coated on the fins of the liquid metal phase change heat sink. The effect of radiative heat transfer on the performance of liquid metal phase change heat sink was investigated. The experimental results of continuous heating under natural convection conditions show that the introduction of the radiative coating with an emissivity of 0.9298 can extend the time for the surface temperature of the heat source to reach 100 °C by 9.4%, while shortening the recovery time of the phase change heat sink by 14.9%. The results of high-power cyclic heating indicate that the high emissivity coating can reduce the peak temperature by 16.6 °C in the tenth working cycle. A simplified numerical model was subsequently developed and validated to determine the specific effects of phase change and radiative heat transfer on the overall thermal control performance. The radiation-enhanced liquid metal phase change heat sink proposed in this study is simple and maintenance-free. It is expected to address the thermal management issues of electronic devices that cannot use active cooling or operate in thin-air environments.