Nowadays, with the development of wearable devices, stretchable pressure sensors have been widely adopted in all kinds of areas. Most of the sensors aim to detect small pressure, such as fingertip tactile sensing, but only a few are focused on high-pressure sensing, such as foot pressure sensing during men’s walking. In this work, a liquid metal-based stretchable sensor for large-pressure measurement is investigated. This sensor is fully stretchable because it is made of soft materials. However, when the soft sensor is subjected to high pressure, the liquid metal easily leaks from microchannels because it maintains the liquid state at room temperature. We therefore propose to fabricate liquid metal-based leakage-free electrodes to handle the liquid-metal leak. Parametric studies are conducted to compare this sensor with liquid-metal-only electrodes and leakage-free electrodes. The leakage-free electrodes increase the measurement ranges from 0.18, 0.18, and 0.15 MPa to 0.44 MPa, with higher linearity and precision. The improvement in the liquid-metal electrode enables the sensors to work stably within 0.44 MPa pressure and 20% strain. In addition, we integrate two capacitors, namely, a working capacitor and a reference capacitor, into one sensor to reduce the influence of parasitic capacitance brought about by external interference. This stretchable capacitive sensor capable of working under a wide range of pressure with good repeatability, sensitivity, and linearity, exhibits great potential use for wearable electronics. Finally, the method for fabricating leakage-free electrodes shows great value for hyperelastic electronics manufacturing and micromachine technology.

Bismuth-based liquid metals (LMs) are a large group of alloys with melting points slightly above room temperature. They are associated with fewer encapsulation constraints than room temperature LMs such as mercury, sodium–potassium alloys, and gallium-based alloys and are more likely to remain stable in the natural environment. In addition, their low melting point properties enable them to soften and melt via easy control. Bismuth-based alloys can also be modified with metal-based, carbon-based, and ceramic-based micro/nano particles as well as polymeric materials to create a series of novel composites owing to their outstanding functions. Based on these considerations, this review provides a comprehensive overview of bismuth-based LMs. The categories of bismuth and bismuth-based LMs are first briefly introduced to better systematize the physical and chemical properties of bismuth-based LMs. Based on these properties, bismuth-based LMs have been prepared using various methods, and this review briefly categorizes these preparation methods based on their finished forms (lumps, powders, and films). In addition, this review details the research progress of bismuth-based LMs in the fields of printed electronics, 3D printing, thermal management, biomedicine, chemical engineering, and deformable robotics. Finally, the challenges and future opportunities of bismuth-based LMs in the development process are discussed and visualized from different perspectives.