Cystine and cysteine as green corrosion inhibitors of the 7075 aluminium alloy in 0.1 M NaCl solution were analysed and compared. The inhibitive efficiency of the inhibitors was analysed by applying linear polarization resistance (LPR) and electrochemical impedance spectroscopy (EIS) methods. Different concentrations of both inhibitors in NaCl solution were tested under different temperatures and times to determine the corrosion kinetic and thermodynamic parameters. Optical microscopy (OM) and scanning electron microscopy (SEM) were used for analysis of the aluminium alloy surface before and after the electrochemical measurements. The hydrophilicity of the alloy surface with tested inhibitors was compared by applying contact angle measurements. The results showed that cystine and cysteine are effective corrosion inhibitors, with different characteristics and duration of protection on the tested aluminium alloy. Cysteine showed better efficiency for short-term applications while cystine provided more stable protection over a longer period.
1 January 2025 in Journal of the Serbian Chemical Society
The extent of corrosion and the underlying causes of damage to the interior metal components of a one-year-old automobile from a known brand, owned by a rental car company in Serbia, were investigated. The vehicle?s interior, including upholstery and carpeting, showed no chemical spills or other damage. The solution obtained after rinsing a carpet sample from the car floor exhibited neutral pH. The corrosion behavior of the analyzed samples was determined using electrochemical impedance spectroscopy (EIS), linear polarization resistance (LPR) and linear sweep voltammetry (LSV, Tafel method). X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) analyses showed that corrosion products taken from corroded steel parts contain akaganeite ?-FeO(OH) and iron (II) chloride. FTIR analysis of the organic coating revealed that the applied epoxy layer was insufficiently crosslinked, making it permeable to moisture and chloride ions. Electrochemical corrosion measurements on steel with a similar chemical composition demonstrated an increased corrosion rate in a solution containing dissolved corrosion products compared to a reference solution. This accelerated corrosion was attributed to the acidity of akaganeite and iron (II) chloride, formed due to the vehicle?s exposure to a humid and chloride-rich environment.