17 February 2017 in IEEE Transactions on Antennas and Propagation
We explore various possibilities for designing multibeam antennas using a single metasurface (MTS) aperture. Both single-source and multisource feeding schemes are considered. For the single-source case, two approaches are investigated. In the first one, the MTS aperture is divided into several angular sectors, each one devoted to the formation of a beam in a given direction. In the second approach, the whole aperture is shared by a superposition of individual modulations, which correspond to those required to obtain beams in the desired set of directions. It is shown that the latter solution provides beams with a higher gain. The configuration based on a multisource feeding scheme is also tailored by a superposition of modulation patterns. The main advantage of the latter approach is the possibility of having one independent beam at a time when each of the sources are active, as opposed to the single-source case where all the beams coexist at the same time. Closed-form expressions are provided for the MTS surface impedance in each of the proposed solutions. The design equations include appropriate amplitude tapering to improve the beam efficiency. Numerical results based on the method of moments are presented for validation.
15 February 2017 in IEEE Transactions on Antennas and Propagation
Different types of efficiencies are introduced for metasurface (MTS) antennas based on single point-source excitation: 1) the feed efficiency ε feed is the power delivered by the feed to surface wave (SW) over the input power; 2) the tapering efficiency ε tap quantifies the deviation with respect to a uniform illumination; 3) the conversion efficiency ε conv defines the capability of the MTS to transform the SW power into leaky-wave power; and 4) the ohmic efficiency ε Ω accounts for the antenna losses. The product of all of these factors provides the overall efficiency of the antenna. New, quite general analytical formulas are suggested to estimate any individual efficiency. In particular, it is seen that ε feed can reach also 90% by using planar or quasiplanar circularly symmetric sources. It is also proven that the product ε conv ε tap cannot be larger than 58% for a uniform modulation; however, by using a nonuniform modulation, it can be increased to reach ε conv ε tap ≈ a/λ/(a/λ + 2), where a/λ is the antenna radius in free-space wavelengths. A new closedform formula for estimating the losses is given. In accordance with the prescription given here, one can reach 75% of global efficiency, including losses, until a radius of 20 wavelengths with commercially available substrates.
25 May 2022 in Proceedings of the IEEE
The term “metasurface” (MTS) denotes an artificial surface constituted by a distribution of electrically small elements that collectively exhibit equivalent homogeneous boundary conditions (BCs) to an interacting electromagnetic field. MTSs are becoming increasingly popular due to the technological simplification that they offer with respect to volumetric metamaterials. In this article, we review the basic theory behind microwave MTSs seen as reconfigurable intelligent surfaces (RISs), oriented to the future visionary challenge of a smart radio environment. To this end, two different typologies of MTS are reviewed: surface-wave-based MTSs and nonspecular reflective MTSs. Both types can be effectively characterized using simplified problems that locally match the homogenized, modulated BCs. A different use of these problems allows for an accurate design of radiated and scattered fields. An accurate ray representation is also suggested, which allows for an effective description of the scattered field also in the Fresnel region and for the insertion of the MTS description in ray-tracing tools for network planning. Several examples of practical implementation are shown, and the challenges in applying electronic reconfigurability are discussed.
28 August 2015 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Metasurfaces (MTSs) constitute a class of thin metamaterials used for controlling plane waves and surface waves (SWs). At microwave frequencies, they are constituted by a metallic texture with elements of sub-wavelength size printed on thin grounded dielectric substrates. These structures support the propagation of SWs. By averaging the tangential fields, the MTSs can be characterized through homogenized isotropic or anisotropic boundary conditions, which can be described through a homogeneous equivalent impedance. This impedance can be spatially modulated by locally changing the size/orientation of the texture elements. This allows for a deformation of the SW wavefront which addresses the local wavevector along not-rectilinear paths. The effect of the MTS modulation can be analysed in the framework of transformation optics. This article reviews theory and implementation of this MTS transformation and shows some examples at microwave frequencies.
20 June 2017 in IEEE Antennas and Propagation Magazine
We derive a general fundamental directivity limitation formula that applies to nonsuperreactive antennas of any size that fit within a minimum sphere of any given radius rmin. The derivation is done by using a new concept: the degrees of freedom (DoF) of the field radiated by arbitrary sources within the minimum sphere must be twice the maximum directivity. The formula converges to the known bound of the directivity for large rmin. For small spheres, it becomes equal to three, i.e., 4.8 dBi, which is the directivity of the Huygens source. The transition region between these two limiting cases is determined by counting the most significant spherical modes at the surface of the minimum sphere. This is not trivial, because spherical modes have a gradual cutoff when their order approaches krmin. Therefore, we use a weighted summation where the weighting factor is inversely proportional to the radiation-Q of the modes. This extends the DoF from a discrete to continuous function of the minimum sphere radius. The final maximum directivity is similar to a previously published heuristic limit. The formulas are compared to results for measured antennas with large directivity and superdirectivity.
30 September 2008 in IEEE Transactions on Antennas and Propagation
A leaky-wave slot array antenna fed by a dual offset Gregorian reflector system is realized by pins in a parallel plate waveguide. The radiating part of the antenna is composed by parallel slots etched on one side of the same parallel plate waveguide. The dual offset Gregorian reflector system is fed by an arrangement constituted by two vias and a grid, also constituted by pins. Also this feed arrangement realizes a leaky type of radiation, this time inside the parallel plate waveguide. A prototype of the antenna has been designed, manufactured and successfully tested. The low profile, low cost and high efficiency of the antenna render it suited for a variety of radar or telecom applications.