Andrea Neto

Andrea Neto

Auto-generated profile, based on publicly available information

Andrea Neto

TNO Defense and Security, Den Haag 2597 AK, The Netherlands

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 September 2008 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MEMauro Ettorre
Mauro Ettorre
ANAndrea Neto
Andrea Neto
GGGiampiero Gerini
Giampiero Gerini
SMStefano Maci
Stefano Maci
A leaky-wave slot array antenna fed by a dual offset Gregorian reflector system is realized by pins in a parallel plate waveguide. The radiating part of the antenna is composed by parallel slots etched on one side of the same parallel plate waveguide. The dual offset Gregorian reflector system is fed by an arrangement constituted by two vias and a grid, also constituted by pins. Also this feed arrangement realizes a leaky type of radiation, this time inside the parallel plate waveguide. A prototype of the antenna has been designed, manufactured and successfully tested. The low profile, low cost and high efficiency of the antenna render it suited for a variety of radar or telecom applications.

7 May 2008 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
NLNuria Llombart
Nuria Llombart
ANAndrea Neto
Andrea Neto
GGGiampiero Gerini
Giampiero Gerini
MBMagnus Bonnedal
Magnus Bonnedal
PMPeter De Maagt
Peter De Maagt
The performance of multibeam focal plane arrays feeding a single aperture is usually reduced due to conflicting requirements on the feed elements. Dense packing is usually required to minimize the beam separation, while typically large feed apertures are needed to provide the high feed directivity to reduce spillover losses from the reflector. In this paper the use of dielectric super-layers to shape the radiation pattern of each feed is demonstrated. The shaping is obtained by exciting, according to design, a pair of TE/TM leaky waves. The spillover from the reflector is reduced without physically increasing the dimensions of each single element aperture. A prototype of a feed array composed of 19 waveguides arranged in a hexagonal lattice was designed, manufactured and tested. The measured embedded patterns provided an increase of the edge of coverage gain, with respect to the free space case, of at least 0.6 dB in an operating bandwidth (BW) of ap12%. Moreover when reactive loading of adjacent feeds is adopted the increase in the edge of coverage with respect to the free space case was demonstrated to be larger than 1.6 dB over a 3% BW.

15 September 2011 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
ANAndrea Neto
Andrea Neto
MEMauro Ettorre
Mauro Ettorre
GGGiampiero Gerini
Giampiero Gerini
PMPeter De Maagt
Peter De Maagt
The use of dielectric super-layers for shaping the radiation pattern of focal plane feeds of a multibeam reflector system is discussed. Using the super-layers, it is possible to reduce the spillover from the reflectors without increasing the dimension of each aperture. The effect has been demonstrated using a realistic array configuration. The experimental demonstration is obtained with configurations which are typical for satellite based multi beam telecommunication links. Thanks to the adoption of a × 4 reuse scheme, based on frequency and polarization orthogonal channels, the measured edge of coverage directivity has improved, with respect to a standard technology case, by 2 dB over an operational bandwidth of about 2%.

1 September 2006
Verified
Conference Paper
Closed access
SBS. Bruni
S. Bruni
ANA. Neto
A. Neto
FMF. Marliani
F. Marliani
Leaky lens antennas are linearly polarized directive antennas constituted by long slots etched on a ground plane that separates a dense dielectric, shaped to form a lens, from free space. These antennas are characterized by significant directivity, very low dispersion and they are suited to be integrated with the receive modules. These properties arise from the particular leaky wave radiation mechanism that these antennas exploit. In this contribution, the ultra-wide band version of the antenna described in A. Neto et al. (2005) is presented

1 October 2008
Verified
Conference Paper
Closed access
RBR.J. Bolt
R.J. Bolt
SBS. Bruni
S. Bruni
ANA. Neto
A. Neto
GGG. Gerini
G. Gerini
This contribution describes the design and characterization of a very compact 8-element proximity fed cavity antenna array realized completely in PCB technology. The cavities are formed by the placement of a series of through pins (vias) along a rectangular outline. Micro-strip lines excite the structure, and slot coupling is used to feed the individual radiating cavities. The elements are linearly polarized, but are arrayed with a diagonal orientation. The configuration allows for defining a single multifunction system that combines functionalities as radar and ESM in X-band. A -10 dB bandwidth of near 20% is achieved with the antenna and -10 dB for |iquests | Lt 50deg over the majority of the design band. The main achievement of the array is the extreme efficiency, also in a design that resorts to very dense dielectrics.

1 October 2008
Verified
Conference Paper
Closed access
Marco PasianMarco Pasian
Marco Pasian
ANAndrea Neto
Andrea Neto
SMStefania Monni
Stefania Monni
MEMauro Ettorre
Mauro Ettorre
GGGiampiero Gerini
Giampiero Gerini
This paper deals with the use of frequency selective surfaces (FSS) to increase the efficiency times bandwidth product in ultra-wide band (UWB) antenna arrays whose efficiency is limited by the front-to-back ratio. If the backing reflector is realized in one metal plane solution its location will be suitable as antenna ground plane only on a limited frequency range. In order to extend the higher frequency range of usability, an FSS can be sandwiched between the antenna and the ground plane. Ideally this FSS will not affect the behavior of the antenna at lower frequencies. The trade-offs that lead this type of designs will be discussed, having in mind a scenario with several antennas sharing the same platform or an unique UWB antenna array operating on the concept of connected arrays.