Felix Frölich

Felix Frölich

Auto-generated profile, based on publicly available information

Felix Frölich

Institute of Vehicle System Technology - Lightweight Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 March 2022 in Virtual and Physical Prototyping
Verified
Journal Article
Open access
LELukas Englert
Lukas Englert
AHAnselm Heuer
Anselm Heuer
MEMathias Keanu Engelskirchen
Mathias Keanu Engelskirchen
FFFelix Frölich
Felix Frölich
SDStefan Dietrich
Stefan Dietrich
VSVolker Schulze
Volker Schulze
The fabrication of polymer–metal hybrids in an additive process makes it possible to further improve the geometrical and material adaption in a multi-material design. In this work, PLA is fabricated through a fused filament fabrication process on AlSi10Mg structures manufactured by laser powder bed fusion. The mechanical connection is realised by form fit, for which different geometries are examined through tensile tests. Deep penetration of the PLA into the metallic structures is achieved by optimisation of the process parameters. The penetration depth is assessed through the use of micro-computed tomography. Finally, the interplay of mechanisms leading to a firm connection is discussed.

24 June 2024 in Progress in Additive Manufacturing
Verified
Journal Article
Open access
PDF file
FFFelix Frölich
Felix Frölich
LBLennart Bechtloff
Lennart Bechtloff
BSBenedikt M. Scheuring
Benedikt M. Scheuring
AHAnselm Heuer
Anselm Heuer
FWFlorian Wittemann
Florian Wittemann
WLWilfried Liebig
Wilfried Liebig
Additive manufacturing by material extrusion offers innovative potential for component design and is driving advances in many industries. However, fully harnessing these advancements necessitates a thorough comprehension of the process-specific anisotropic structural properties. The complex interactions between process parameters and their direct influence on structural properties often lead to discrepancies between the mechanical properties of tested specimens at the coupon level and the inherent properties of additively manufactured components. In addition, there is no standardized method for preparing specimens that represent the mechanical properties within a given component. This further complicates the comparison of measured properties of different series of measurements and the investigation of manufacturing effects that may occur during the production of a component. Given these challenges, the present work addresses the fundamental question of what aspects need to be considered to ensure that the test specimens reflect the process conditions being tested. The studies look at the requirements for producing representative specimens and for the test methodology to characterize the mechanical properties of additively manufactured structures. The tests are carried out on specimens that were produced directly using the material extrusion process and on specimens that were cut from additively manufactured plates. Water jet cutting, milling, and laser cutting are investigated and compared as cutting methods. The influence of the specimen geometry and the size of the additively manufactured plate is considered. The orientation-dependent mechanical properties, the significance of the individual tests, the measurement scatter, and scanning electron micrographs of the cut edges and fracture surfaces are analyzed. Finally, guidelines for performing representative tests to characterize the mechanical properties of additively manufactured components are proposed.

15 July 2024 in Journal of Open Source Software
Verified
Journal Article
Open access
PDF file
JKJonathan Knirsch
Jonathan Knirsch
FFFelix Frölich
Felix Frölich
LHLukas Hof
Lukas Hof
FWFlorian Wittemann
Florian Wittemann
LKLuise Kärger
Luise Kärger
The Machine instructions for material extrusion processes (MEX), such as the fused filament fabrication (FFF) process, are typically provided as GCode, which can be generated by a variety of slicer programs. The 3D model of the part is sliced into multiple layers and a tool path is created for each according to the parameters for infill, perimeters supports and other structures (Gibson et al., 2021). The exported GCode consists of a list of commands specifying target points in space for the tool as well as the amount of material to be extruded. Additionally, process parameters such as temperatures, velocities or cooling fan speeds are set and changed during printing according to the GCode.

15 November 2025 in Additive Manufacturing
Verified
Journal Article
Open access
FFFelix Frölich
Felix Frölich
MNMario Emanuele Di Nardo
Mario Emanuele Di Nardo
CKConstantin Krauß
Constantin Krauß
AHAnselm Heuer
Anselm Heuer
WLWilfried Liebig
Wilfried Liebig
LKLuise Kärger
Luise Kärger

27 December 2024 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
FFFelix Frölich
Felix Frölich
LHLukas Hof
Lukas Hof
CZClemens Zimmerling
Clemens Zimmerling
FWFlorian Wittemann
Florian Wittemann
LKLuise Kärger
Luise Kärger
To solve the multiscale problem of additive manufacturing of large components by material extrusion (MEX), this work utilizes the methodology of submodeling and shows the necessary modeling steps to apply the methodology to the material extrusion process. The research enables the coupling of high-resolution models and process simulations at the component level. It allows the investigation of local effects such as crystallization effects or the resulting interface strength and its dependence on process variables in critical zones of a component, considering the component geometry as well as global and component-specific process conditions. The principle is verified numerically and validated experimentally, showing good agreement. In addition, different specifications for boundary conditions and submodel sizes are compared and evaluated. Variable time increments are used to apply the submodels with a computational time independent of the component size. In addition, sensitivity analyses provide information on the necessary temporal and spatial discretization of the submodel for the most accurate prediction of the temperature profile.

22 July 2022 in Key Engineering Materials
Verified
Journal Article
Open access
PDF file
FFFelix Frölich
Felix Frölich
LKLuise Kärger
Luise Kärger
The integration of local metal structures into polymer components using Laser Powder Bed Fusion (PBF-LB/M) offers great potential regarding multifunctional lightweight structures. However, such process hybridization involves huge challenges. In order to reduce the temperature input into the less temperature-resistant materials, the use of lower laser powers in the interfacial region is essential. The resulting local sintering of the metal powder affects the thermal properties in the interfacial region, leading to a change in heat dissipation in the temperature-unstable material. A modeling approach oriented to selective laser sintering is presented for predicting the degree of sintering and associated thermal properties in the context of PBF-LB/M process simulation.