1 January 2021 in Advances in Materials Science and Engineering
The hazard chain of rib spalling, roof collapse, and support instability occurring in steeply dipping coal seams (SDCSs) significantly threatens the safety and productivity of underground mining. A three‐dimensional coal wall model was established considering the damage to the coal wall from the abutment pressure based on the new concept of the main control weak surface (MCWS) defined by the authors. Then, a support mechanical model under the conditions of a dynamic load induced by a sliding roof was constructed. Integrated control measurements based on the models above were developed and taken for the dangerous area of hazard chains in working faces. The results indicated that the dimensions of rib spalling were dominated by the shape, dimensions, and friction angle of the coal wall element. In detail, the order of the importance of the element failure factors, based on their sensitivities, was the roof load (6.33), the dip of the panel (−5.03), the friction angle of the coal (−3.24), the cohesion of the coal (−3.02), and the sidewall protecting force (−0.087). Additionally, the order of importance of the frictional sliding factors of the slip body was the MCWS cohesion (−0.293), roof load (0.213), and MCWS friction angle (−0.079). Equations for the threshold forces between supports under the support dumping and sliding limit states were obtained; the knowledge of these forces ensured support stability under a sliding roof. The support work resistance varied synchronously in different parts of the working face and remained within 2200–4000 kN, indicating that the proposed models and control measurements considered instrumental in hazard chain control in SDCSs were reliable.
1 January 2020 in Advances in Civil Engineering
Steeply inclined and thick coal seams in Huainan Panbei Coal Mine in Anhui Province, China, were analyzed by physical analog modeling, acoustic emission (AE), and distributed fiber sensing (DBS). The secondary deformation breakage law, sound, and light response characteristics in the rock mass deformation process induced by lower slice mining of steeply inclined coal seams were determined. The results show that the mutation of the hinged rock beam structure in the lower region and the cantilever beam structure in the upper region of the lower slice disturbed overburden is the main cause of the rupture of the workface roof. Based on the AE energy and distributed fiber strain response characteristics, the six stages of disturbed overburden instability in the lower slice and cyclic patterns of steeply inclined coal seams were revealed. The key prevention and control areas of the workface were found to be related to the disturbed high‐level immediate roof rupture during the lower slice mining process, rupture of the disturbed main roof, and sliding of disturbed overburden. The three‐stage AE positioning morphological characteristics and DBS response stepped jump patterns were analyzed in detail. The research results are considered instrumental in the combined AE and DBS monitoring of deformation and damage of rock and soil structures.
1 January 2021 in Shock and Vibration
Studies on jet grouting materials mainly focus on the aggregates in cement or the environment where they are maintained and rarely deal with the cohesiveness, reinforcement load‐bearing characteristics, and surface spalling. In this study, cement slurries with different colloid contents were prepared to explore the characteristics and reinforcement effect of broken gangues. These were then subjected to mechanical testing to measure the strength and axial strain performance, and the failure modes and failure patterns were discussed. The results indicated that the colloid component has a significant strengthening effect on the early strength of the samples. As the age increased, the sample axial strain and elastic modulus of the colloid cement paste increased as the colloid component provides viscoelasticity when it resists deformation. The sample strength of cement paste decreases after the addition of broken gangue while the strength of class E samples increases significantly during each age. The cement paste sample showed penetrating splitting failure, the colloidal component effectively controlled the peeling of sample surface, and the failure mode after adding gangue was relatively complicated. The instability modes of the samples are divided into dispersed load‐bearing instability and cumulative load‐bearing instability, and the content of colloid components affects the failure mode of the samples. A colloid component proportion of 23.33% is the optimal choice, which has an obvious reinforcement effect on the broken gangue.
1 January 2021 in Progress In Electromagnetics Research Letters