12 February 2025 in Composites Part B: Engineering
1 December 2025 in Applied Physics Letters
While high-entropy fluorite oxides have shown promise for applications in extreme environments, achieving epitaxial integration with high thermal stability and structural coherence remains a significant challenge. Here, we report the synthesis of an epitaxial chemically disordered single-phase fluorite oxide thin film, (HfZrCeGdCa)O2, on a yttria-stabilized zirconia (YSZ) (100) substrate via pulsed laser deposition. Structural characterization by x-ray diffraction (XRD) and atomic-resolution scanning transmission electron microscopy imaging and energy-dispersive x-ray spectroscopy confirm the high crystalline quality and uniform elemental distribution of the film, validating its chemically disordered single-phase character. In situ temperature-dependent XRD shows the high thermal stability without phase separation and secondary phase formation up to 1200 °C. Reciprocal space mapping and strain analysis indicate coherent in-plane lattice matching with the YSZ substrate, accompanied larger out-of-plane lattice constant. Local lattice tilting, rotation, and interfacial dislocations are observed, suggesting partial strain relaxation close to the interface. These results underscore the structural integrity and thermal stability of the chemically disordered single-phase fluorite oxide films, supporting their potential use in advanced functional coatings for extreme environments.
21 February 2026 in SSRN Electronic Journal
Accurate state-of-charge (SOC) estimation is essential for ensuring the safe and reliable operation of lithium-ion batteries. Linear ultrasonic features such as time-of-flight and signal amplitude have been widely investigated as indicators for battery state monitoring. However, these features mainly depend on second-order elastic constants, which limit estimation accuracy. This study presents a nonlinear ultrasonic framework for accurate battery state estimation by combining bispectral analysis with a long short-term memory (LSTM) network. First, a theoretical relationship between the ultrasonic nonlinearity parameter and battery state is established based on elasticity theory. Next, ultrasonic measurements are performed using a through-transmission configuration. A modified ultrasonic nonlinearity parameter is extracted from reconstructed signals obtained through bispectral analysis and the LSTM network. The proposed framework achieves a SOC estimation error below 3% and improves estimation accuracy by a factor of 3.06 compared with linear ultrasonic features. Under C/2, 1C and 2C conditions, root mean squared errors of 3.1%, 2.4% and 2.9% are obtained, respectively. The results demonstrate that nonlinear ultrasonics combined with deep learning improves real-time battery state estimation accuracy.
1 July 2026 in e-Journal of Nondestructive Testing
Lightning strike damage in carbon fiber reinforced polymer (CFRP) composites arises from complex electro-thermal interactions that produce surface degradation and subsurface defects, making reliable assessment difficult using a single non-destructive testing (NDT) technique. Accurate damage characterization is essential to ensure the integrity of primary aerospace structures and to evaluate lightning protection strategies. This study presents a multi-modal inspection approach combining infrared thermography (IRT) and computed tomography (CT) for assessing lightning-induced damage in CFRP laminates. Several configurations were investigated, including a baseline laminate and laminates incorporating lightning protection architectures. All specimens were coated with aircraft-grade paint and subjected to simulated lightning strikes in accordance with SAE ARP5416 standards, with peak currents of 100 kA and 200 kA. IRT captured the transient thermal response following the strike, enabling identification of damaged regions through changes in heat diffusion linked to internal degradation. CT provided 3D visualization and quantitative evaluation of subsurface damage, including delamination, matrix decomposition, and fiber disruption. A strong spatial correlation was observed between thermographically identified damage zones and CT-measured defect volumes. The results demonstrate that protected laminates achieve more than a 50% reduction in surface damage area compared to the baseline, together with a clear reduction in internal damage severity.