Yurii V. Bulii

Yurii V. Bulii

Auto-generated profile, based on publicly available information

Yurii V. Bulii

National University of Food Technologies, Kyiv, Ukraine

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 March 2024 in Energy Technologies & Resource Saving
Verified
Journal Article
Open access
PDF file
ОOО.м. Obodovych
О.м. Obodovych
BTB.YA. Tselen
B.YA. Tselen
OSOlesya Stepanova
Olesya Stepanova
ANA.YE. Nedbailo
A.YE. Nedbailo
YBYu.V. Bulii
Yu.V. Bulii
An analysis of methods and equipment for obtaining hydrocarbon fuel was carried out. The purpose of the work is the development of technology and heat-mass exchange equipment for the production of universal hydrocarbon fuel, suitable for use in all types of thermal power plants. Heat and mass exchange equipment has been developed, with the help of which it is possible to obtain universal hydrocarbon fuel with a maximum size of coal particles no larger than 3 microns. The use of water-coal suspensions as an energy fuel allows to increase the technical, economic and environmental indicators of power plants. Thus, during the transition to coal-hydrogen fuel, it was possible to increase its thermal capacity from 13.2 to 21.1 MW when 70 % of coal was replaced by coal-hydrogen fuel. Currently, there are various methods and equipment for the preparation of hydrocarbon fuel. However, they all have certain drawbacks. The main disadvantages of the methods of obtaining hydro-coal fuels are multi-stage, metal-intensive, high energy costs, carrying out physico-mechanical and expensive chemical demineralization of coal, etc. Also, the disadvantages are the limited frequency of hydraulic shock pulses during processing in one cycle, which is insufficient when preparing highly concentrated suspensions that meet the requirements for liquid composite fuel intended for direct combustion. In order to improve the quality of the resulting suspension due to more effective grinding and increasing the amount of its solid component, heat and mass exchange equipment was developed, which can be used to obtain universal hydrocarbon fuel for burning in boilers, furnaces, various thermal power equipment, internal combustion engines, etc. As heat and mass exchange equipment, rotary pulsation devices operating according to the method of discrete-pulse energy input were used. Bibl. 18, Fig. 4, Tab. 3.

25 December 2025 in Journal of Chemistry and Technologies
Verified
Journal Article
Open access
PDF file
ODOlha S. Dulka
Olha S. Dulka
VPVitalii L. Prybylskyi
Vitalii L. Prybylskyi
RMRoman S. Malkin
Roman S. Malkin
YTYurii M. Tkachuk
Yurii M. Tkachuk
YBYurii V. Bulii
Yurii V. Bulii
IBIaroslav A. Boyarchuk
Iaroslav A. Boyarchuk
Traditional kombucha is produced by fermenting an infusion of black or green tea using a symbiotic culture of bacteria and yeast (SCOBY). According to the classification of microorganisms, this culture is called Medusomyces gisevii. It ferments sucrose and other components of the wort, which can serve as the basis for creating new products with original sensory properties beneficial to human health. The article determines the optimal temperature for extracting Clitoria ternatea L. tea leaves for the preparation of kombucha fermented beverage. It was established that the change in the color of the wort during fermentation is caused by an increase in its acidity and a corresponding change in the coloration of the fermented wort. The influence of aeration during fermentation on the appearance of the drinks was analyzed. The effect of dry matter content, particularly sucrose, on the fermentation process was studied. Changes in titratable acidity during the fermentation of wort under different cultivation conditions were determined. The content of acetic, gluconic, glucuronic, pyruvic, malic, citric, and succinic acids in the fermented wort was identified. The organoleptic profile of the drinks was examined, which confirms the feasibility of aerating the wort during fermentation.

3 October 2025 in Energy Technologies & Resource Saving
Verified
Journal Article
Open access
PDF file
ОOО.м. Obodovych
О.м. Obodovych
YBYu.V. Bulii
Yu.V. Bulii
VSV.V. Sydorenko
V.V. Sydorenko
OSOlesya Stepanova
Olesya Stepanova
BTB.YA. Tselen
B.YA. Tselen
In the energy sector, particularly, the transport sector, biomass of plant origin is associated with additives to motor fuels with biodiesel and bioethanol. The main purpose of the pretreatment of lignocellulosic raw materials for hydrolysis is to destroy the heterogeneous matrix, increase the surface area and porosity of the cellulose material, and free carbohydrates from lignin bonds. One of the key factors affecting the efficiency of pretreatment and subsequent hydrolysis is the size of the raw material particles obtained at the stage of mechanical grinding. During subsequent processing in rotary reactors based on centrifugal pumps, the raw material is subjected to additional influence of thermophysical factors, which contribute to a further increase in the degree of dispersion of the raw material, increasing the specific surface area of the cellulose material. The work aimed to determine the influence of the complex thermophysical phenomena of hydromechanical processing on the particle size of plant raw materials during their pretreatment for hydrolysis in the technology of obtaining fuel ethanol. The feedstock was wheat straw and corn stalks, chopped on a straw cutter, and once processed in a disintegrator. The determination of the plant raw material particle size distribution was carried out using sieve analysis. The processing of the suspension of plant raw materials was carried out on experimental setup with a reactor mixer, which is a rotor-pulsation apparatus. The particle size distribution in the range of 0.001-0.08 mm was determined using a laser particle size analyzer Microsizer 201 A. Further crushing of the straw was carried out on experimental setup. It was determined that with an increase in the solid : liquid ratio from 1 : 5 to 1 : 15, the size of the parts decreases by 35–40 %, and when increasing the solid : liquid ratio from 1 : 5 to 1 : 10 — by 3–5 %. Changing the solid : liquid ratio from 1 : 15 to 1 : 10 for 10 cycles of processing the dispersion in the reactor-mixer until the temperature drops from 47 to 42 °C, at which the productivity of the equipment increases in 1.5–2 times, energy consumption changes by 25–30 %. The temperature of an aqueous dispersion of wheat straw (corn stalk) at a ratio of 1 : 15, mixed in the reactor-mixer for 10 cycles, moves from 17 to 22 °C, at the same time at solid : liquid ratio 1 : 10 at 17 to 42 °С, at solid : liquid ratio 1 : 5 at 17 to 47 °С. When processing an aqueous dispersion with wheat straw in a reactor mixer with a pulsation frequency of 1 kHz, 42 cycles are required to achieve 100 % frequency in less than 80 µm. When the pulsation frequency increases from 1 to 3 kHz, the number of cycles changes to 30. When the pulsation frequency changes from 1 to 5 kHz, the number of cycles decreases to 27. Changing the shear rate of the flow has a more significant effect on particle dispersion than the pulsation frequency. The number of processing cycles is reduced by 5–7 %. Bibl. 15, Fig. 8.

16 April 2026 in Thermophysics and Thermal Power Engineering
Verified
Journal Article
Closed access
YBYu.V. Bulii
Yu.V. Bulii
OOO.M. Obodovych
O.M. Obodovych
MBM.V. Bondar
M.V. Bondar
VSV. V. Sydorenko
V. V. Sydorenko
Technological calculations of the column mass–exchange apparatus assume instantaneous transfer of volatile components of vapour and liquid phases, without considering the residence time the liquid on the trays. There is a threshold below which the contact time between the phases is insufficient to reach equilibrium, and as a result, the efficiency of commonly used tray types does not exceed 0.4-0.6. The aim of the work was to study the phase equilibrium between liquid and vapour in the ethanol-water system under subatmospheric pressure; to select appropriate methods for thermodynamic thermodynamic validation of experimental data; to develop approaches for modeling mass transfer between liquid and vapour in cyclic column apparatuses in order to increase tray efficiency; and to evaluate their effectiveness in processing of ethanol–containing fractions under industrial conditions. Research methods included analytical, computational, physicochemical and chromatographic techniques using instruments and methodologies applied in the production of rectified ethanol. The custom-designed experimental apparatus was developed, which allowed to increase the accuracy measurements and reduced the time required to achieve phase equilibrium to 30–40 min. Experimental data on phase equilibrium in the ethanol-water system were obtained in the pressure range of 103 to 50.6 kPa specifically in the low ethanol concentration region (below 3.0 mоl. %), which corresponds to the operation conditions in the lower sections of distillation and rectification columns. Based on the experimental data, phase equilibrium modeling was performed for the specified pressure. The Tsuboko-Katayama equation was used for modeling. Thermodynamic validation of the results demonstrated a satisfactory level of agreement between calculated and experimental data. Phase equilibrium curves were constructed, the relationship between ethanol evaporation coefficients and pressure was established, and the inversion of equilibrium curves was identified. Mass transfer methods between liquid and vapor under controlled cycles of liquid holdup and overflow have been developed, along with designs of mass-exchange apparatus for their implementation. The hydrodynamic operating modes of trays under cyclic conditions have been determined. Experimental results have shown that the extending the contact time between phases on the trays to 30-60 seconds significantly increases the efficiency and reduces steam consumption up to 40%.

1 January 2026 in Acta Periodica Technologica
Verified
Journal Article
Open access
PDF file
OOOleksandr Obodovych
Oleksandr Obodovych
BTBogdan Tselen
Bogdan Tselen
NRNatalia Radchenko
Natalia Radchenko
OSOlesya Stepanova
Olesya Stepanova
YBYurii Bulii
Yurii Bulii
Under the conditions of the ongoing war in Ukraine, accompanied by continuous attacks on nuclear facilities, the risks of radioactive contamination by radionuclides have significantly increased, posing a serious threat to human life and public health. One of the approaches to addressing this problem is the use of low-esterified pectin as a dietary supplement, since it performs the function of a radioprotector in the human body and significantly reduces the risks of radiation-related diseases. Sugar beet pulp is currently considered a valuable source of such pectin. The organization of its industrial-scale processing requires the implementation of new energy-efficient equipment as well as the optimization of existing technologies in accordance with modern requirements. In the context of solving this problem, the authors proposed novel heat-and-mass-transfer equipment operating on the principle of discrete-pulse energy input (DPEI), implemented in rotor-pulsation-type equipment. It has been proven that, owing to the processes of dispersion, mixing, heating, dissolution, hydrolysis, and extraction realized in this equipment, it became possible to increase the efficiency of pectin extraction. Optimal process conditions were determined, under which a 97% extraction degree was achieved.

28 February 2023 in European Science
Verified
Journal Article
Open access
VBVolodymyrovych Buliy
Volodymyrovych Buliy
OOOleksandr Obodovych
Oleksandr Obodovych
LSLarysa Sablii
Larysa Sablii
BTBohdan Tselen
Bohdan Tselen
OPOlena Pereiaslavtseva
Olena Pereiaslavtseva
OSOlesya Stepanova
Olesya Stepanova
For municipal water supply systems, industrial enterprises, and thermal plants, the content of mineral impurities in water is regulated, which necessitates the use of technologies for their removal.The object of study was water from an artesian well, whi