1 January 2021 in Materials Science and Engineering: A
1 February 2024 in Composite Structures
1 February 2013 in Journal of Instrumentation
14 May 2010 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
This article deals with finite-element (FE) modelling of the reinforcing effect of the geosynthetic material used in the construction of a ballasted track. Various different designs of geosynthetic material are studied and their reinforcing effects are evaluated in terms of the total settlement reduction. Three-dimensional FE models of the reinforced railway superstructure are compared to a reference FE model with no reinforcement. Each geosynthetic material is modelled respecting its material properties, and the interaction with the ballast material is simulated according to its primary function. A clear distinction in the modelling of the interaction with the ballast material is made between geogrids and the remaining geosynthetics. A new approach to model the reinforcing effect of a geogrid is proposed and evaluated by FE analysis. The results of numerical modelling are compared to those of experiments conducted using an experimental box instrumented with one half of an instrumented concrete sleeper. Different types of geosynthetics were used to reinforce the ballast material, and the settlement reduction was measured using linear variable differential transformer (LVDT) sensors. The proposed FE models enable quick evaluation of the reinforcing effect of a given geosynthetic and comparison to other possible solutions in terms of the total settlement reduction. Other design possibilities (e.g. the use of reinforcing geosynthetics in several layers) are briefly discussed, too.
1 May 2014 in Journal of Instrumentation
10 September 2013 in Key Engineering Materials
This paper is focused on determination of micro-mechanical material properties of aluminium metal foam at level of single cell wall. For the purpose of homogenization, complex and heterogenous inner structure of metal foams requires deep understanding of its deformation mechanisms and local mechanical properties. Therefore, a series of micro-scale bending tests of specimens prepared from foam's cells wall were performed. Initially, a technique of specimen preparation was developed. Dimensions and geometry of the specimens were inspected using scanning electron microscopy (SEM). Custom-designed three-point bending device suitable for testing at micro-scale was used for loading. Thin pure aluminium metal sheets were used for calibration of the described method. Six single cell wall specimens were tested. It can be concluded that the developed specimen preparation technique and loading method are suitable to determine local mechanical properties of thin walled metal foams.