This article presents a novel tetrahedral soft-legged robot for multigait locomotion, including steering, crawling, and rolling along three different directions. The proposed robot has a compact structure with four active soft legs plugged together onto a rigid pivot. Each active soft leg is made of a novel pneumatic omnidirectional bending soft actuator. Locomotion is achieved by the sequential bending actuation of soft legs. Different inflation sequences are used to drive the soft legs to bend and realize multigait locomotion. Multiple gaits are analyzed with dynamic simulation methods. By discretizing the continuous soft leg into rigid links hinged end-to-end, a multibody dynamics model is built to simulate the robot dynamics and verify the feasibility of multigait locomotion. The crawling speed can reach 3.7 mm· $\text{s}^{-1}$ , the steering speed can reach 1.1 $^\circ \text{s}^{-1}$ , and the rolling speed can reach 5.5 $^\circ \text{s}^{-1}$ and 20.6 mm· $\text{s}^{-1}$ . Experimental and simulation results show the capability of multigait locomotion of the proposed robot. The proposed robot has potential applications in search and rescue.
The aim of this work is to design and model a novel modular bionic soft robot for crawling and crossing obstacles. The modular bionic soft robot is composed of several serial driving soft modules, each module is composed of two parallel soft actuators. By analyzing the influence of working pressure and manufacturing size on the stiffness of the modular bionic soft robot, the nonlinear variable stiffness model of the modular bionic soft robot is established. Based on this model, the spatial states and design parameters of the modular bionic soft robot are discussed when the modular bionic soft robot can pass through the obstacle. Experiments show that when the inflation air pressure of the modular bionic soft robot is 70 kPa, its speed can reach 7.89 mm/s and the height of obstacles passed by it can reach 42.8 mm. The feasibility of the proposed modular bionic soft robot and nonlinear variable stiffness model is verified by locomotion experiments.
In the paper, a novel modular soft robot that can crawl and turn is presented. The modular soft robot is composed of multiple drive modules connected in series, including one head module, one tail module and three body modules. Each module is actuated by the air chamber. Due to the nonlinear performance of the air chamber, the strain energy function of the air chamber is established. The relationship between the displacement of the air chamber expansion wall and the inflation pressure is obtained, and the manufacturing parameters of the air chamber are determined. By dividing the body of the robot into a series of continuous flexible models, the driving force and the friction force of the robot in locomotion are analyzed. An inflation and deflation control method is presented to complete the locomotion. According to the experiment, the crawling speed of the robot can reach 15.53 mm/s (0.03 body length per second). The turning speed of the robot can reach 1.273 °/s. The robot can crawl and turn on the rough blanket surface effectively. The robot can explore and move in a complex and changeable environment.
12 December 2022 in IEEE/ASME Transactions on Mechatronics
This article presents a study on pneumatic bending soft actuator (SA) coupling with revolute joint (RJ) with different boundary constraints (BCs), aimed to discover the bending performance of SA wearing on physical joint of human body as body joint actuators with different installation methods. First, a new pneumatic bidirectional bending SA is designed and fabricated, and its mechanical characteristic is obtained by experimental tests and fitting methods. Then, the mechanical characteristic is applied to the discrete bending model that approximates the continuous bending of the SA, and the kinetostatic analysis based on the principle of virtual work is conducted on the SA-RJ coupling system (SA-RJ CS) with fixing BC (FBC), hinging BC (HBC), and sliding BCs (SBCs). The kinetostatic equations are solved numerically, and thus the bending performance of the SA-RJ CS with different BCs is obtained. Results show the SA-RJ CS with SBCs performs better in bending angle and actuating torque than that with FBC or HBC. Therefore, it is suggested to install the SA of joint actuator on human body by SBCs. This study guides the application of pneumatic bending SA in rehabilitation exoskeleton. At present, we have used the axial SBC in rehabilitation exoskeleton.
This paper presents the design, modeling, and control of a novel soft-rigid knee joint robot (SR-KR) for assisting motion. SR-KR is proposed to assist patients with knee joint injuries conducting gait training and completing walking movements. SR-KR consists of a novel soft-rigid bidirectional curl actuator, a thigh clamping structure, and a crus clamping structure. The actuating part of SR-KR is composed of soft materials, which ensures the wearing comfort and safety, while the wearing parts contain rigid structure, which ensures the efficient transmission of torque. The bending deformation model of SR-KR is established, which reveal the relationship among SR-KR’s bending curvature, working pressure, and output torque. Experiments show that SR-KR can provide more than 26.3 Nm torque for knee joint motion in human gait range. A double closed loop servo control system including attitude servo and pressure servo is built to better apply SR-KR. Mechanical property test, trajectory-driven test, and lower limb wearing test have been conducted, which show that SR-KR has ability to assist in lower limb motion and has potential in the fields of rehabilitation and human enhancement.