An accurate method is developed to extract the spin–orbit (SO) effective fields by analyzing harmonic Hall voltage measurements and deriving detailed analytical equations that consider both the z component of the applied magnetic field and the second-order perpendicular magnetic anisotropy. The method is tested by analyzing the results of a macrospin simulation. The SO effective fields that are extracted from the analysis are consistent with the input SO effective fields that are used in the macrospin simulation over the entire range of the polar magnetization angle and for a wide range (0–2) of the ratio of the planar to the anomalous Hall voltage considered in this study. The accuracy of the proposed method is demonstrated via a systematic study that involves comparing its results with those of a conventional analytical method.
Strong interlayer exchange coupling (IEC) and high post-annealing stability are demonstrated for perpendicular synthetic ferrimagnets (p-SyFs) with [Pt/Co]6/Ru/[Co/Pt]3 structures. The observed IEC strength was 2.55 ergs/cm2 for a Ru thickness of 0.35 nm, representing the highest value achieved up to date for similar structures. The IEC remained strong even after annealing at 450oC, for the practically important Ru layer thickness of 0.85 nm. The biquadratic IEC, a parameter quantifying the pinhole effects in SyFs, was confirmed by analyzing the experimental results by using the total energy functional, and its strength increased with decreasing the temperature and Ru layer thickness.
In this study, we derive analytical expressions for the critical switching current density induced by spin Hall effect in magnetic structures with the first- and second-order perpendicular magnetic anisotropy. We confirm the validity of the expressions by comparing the analytical results with those obtained from a macrospin simulation. Moreover, we find that for a particular thermal stability parameter, the switching current density can be minimized for a slightly positive second-order perpendicular magnetic anisotropy and the minimum switching current density can further be tuned using an external magnetic field. The analytical expressions are of considerable value in designing high-density magnetic random access memory and cryogenic memory.
In stacks using a Ru/Ta composite spacer [Pt/Co]6/Ru/Ta/CoFeB/MgO, both strong interlayer exchange coupling and perpendicular magnetic anisotropy are achieved. The composite spacer has the additional advantages of high post-annealing stability over a conventional Ru spacer; for a Ru (0.8 nm)/Ta (0.4 nm) spacer, where the antiparallel coupling is strongest, the coupling strength remains nearly constant at the highest annealing temperature of 375 °C. An interlayer exchange coupling is observed at very small Ru thicknesses down to 0.2 nm, which can be compared with the previous limit of 0.6 nm.