7 July 2018 in Journal of the Electrochemical Society
DMD. C. Martínez-Casillas
Activated biochars from solid residues have been very successful in many applications due to their high surface area, porosity properties, and surface chemistry. Our work, leather waste-derived biochar obtained from pyrolysis of footwear leather wastes at 700°C, followed by a chemical activation with KOH has been prepared, and characterized by SEM, physisorption, XPS and Raman. Results showed that activation with KOH increases the biochar BET specific surface area by almost 100 times. The biochars were tested as electrode materials for supercapacitors in four different aqueous electrolytes, where the KOH activated biochar (AL700) shows higher capacitances. A maximum specific capacitance of 268 Fg-1 (5 mVs-1) was obtained in 0.5M H2SO4 electrolyte for the AL700. A supercapacitor cell was assembled showing excellent performance, with a capacitance of 52 Fg-1 at 0.5 mA g-1 with only 8% of capacitance loss after 5000 charge/discharge cycles, reveling a high stability. The maximum specific energy and specific power determined were 12.8 Wh kg-1 and 1.8 kW kg-1, respectively. These results indicate that it is possible to use the footwear leather waste in energy storage devices, such as in supercapacitors showing a major improvement in SC cells performance, compared to commercial carbons.
14 August 2015 in Journal of Solid State Electrochemistry
In this work, we show a comparative study based on the effects of specific chemical functional groups (–OH, –NH2), grafted on Vulcan carbon (VC) with the incorporation of a specific polyoxometalate (POM), PMo12 (H3PMo12O40), to improve electrochemical performance. We observed a decrease in the specific surface area of the grafted matrices (VC-OH and VC-NH2) [ 1 ], and the same trend was observed for PMo12 (POM) incorporation. Our electrochemical studies showed low concentrations of POM in unmodified VCs and higher POM concentrations for grafted matrices (VC-OH and VC-NH2) after 500 voltammetric cycles, especially for the VC grafted with –OH groups (VC-OH-POM). Mechanisms have been proposed for POM interaction with the grafted groups in carbon, emphasizing the role of aqueous medium and redox activity of POM. Cyclic voltammograms suggested the POM anchoring through –OH groups with a strong interaction as a covalent bond, resulting in a surface coverage of 1.66 × 10−11 mol cm−2. Surface modifications could be extrapolated to other carbons, and the materials could be employed for different potential applications such as photocatalysis, amperometric sensors, fuel cells, and supercapacitors.
2 March 2024 in Journal of Cleaner Production
11 March 2022 in Energy & Fuels
EFEduardo Fuentes-Quezada
DMDiana Cristina Martínez-Casillas
Diana Cristina Martínez-Casillas
29 September 2020 in Waste and Biomass Valorization
DMDiana C. Martínez-Casillas
Diana C. Martínez-Casillas
IMIvan Mascorro-Gutiérrez
MBMaria L. Betancourt-Mendiola
Maria L. Betancourt-Mendiola
+3