Breast cancer is the second leading cause of death for women in the United States.1 Diffuse optical tomography (DOT) and diffuse optical spectroscopy are functional imaging modalities being explored for breast cancer diagnosis and treatment prediction.2 – 9 DOT provides quantitative estimations of oxygenated and deoxygenated hemoglobin concentrations calculated from reconstructed optical absorption maps of breast lesions. Hemoglobin concentrations are directly related to tumor angiogenesis, a hallmark of cancer. Since diffused light suffers from poor lesion localization and inaccurate target quantification due to intense scattering, image reconstruction is often guided by another high-resolution imaging modality, such as ultrasound (US),6 magnetic resonance imaging,8,9 or x-ray,10 which provide structural information about the tumor. While DOT guided by other modalities can significantly reduce the number of voxels with unknown optical properties for more accurate reconstruction,7 image artifacts caused by outlier measurements due to wavelength-dependent tissue heterogeneity, bad coupling between tissue and sources and detectors, and patient motion or operator hand motion can distort the reconstructed images. Several experimental and modeling approaches have been developed for system calibration of optical source strengths, detection channel gains and phase shifts,11 – 13 source and detector (optodes) position errors, and coupling errors between skin and optodes.12,14 – 17 For correcting motion artifacts, different algorithms have been proposed, including cubic spline interpolation,18 adaptive Kalman filtering,19 and wavelet-based motion artifact removal.20 To improve the imaging quality, projection error-based adaptive regularization techniques have been employed, which outperform standard Tikhonov regularization.21 However, these approaches do not compensate for wavelength-dependent problems. For example, the 740-nm wavelength is prone to measurement errors from tissue heterogeneity caused by dark skin and skin pigment. As another example, the 830-nm wavelength has lower signal to noise ratio at longer source and detector distances due to the reduced sensitivity of photomultiplier tube (PMT) detector beyond 800 nm.