18 April 2022 in Journal of Microscopy
Insight into the nucleation, growth and phase transformations of calcium sulphate could improve the performance of construction materials, reduce scaling in industrial processes and aid understanding of its formation in the natural environment. Recent studies have suggested that the calcium sulphate pseudo polymorph, gypsum (CaSO4·2H2O) can form in aqueous solution via a bassanite (CaSO4·0.5H2O) intermediate. Some in situ experimental work has also suggested that the transformation of bassanite to gypsum can occur through an oriented assembly mechanism. In this work, we have exploited liquid cell transmission electron microscopy (LCTEM) to study the transformation of bassanite to gypsum in an undersaturated aqueous solution of calcium sulphate. This was benchmarked against cryogenic TEM (cryo‐TEM) studies to validate internally the data obtained from the two microscopy techniques. When coupled with Raman spectroscopy, the real‐time data generated by LCTEM, and structural data obtained from cryo‐TEM show that bassanite can transform to gypsum via more than one pathway, the predominant one being dissolution/reprecipitation. Comparisons between LCTEM and cryo‐TEM also show that the transformation is slower within the confined region of the liquid cell as compared to a bulk solution. This work highlights the important role of a correlated microscopy approach for the study of dynamic processes such as crystallisation from solution if we are to extract true mechanistic understanding.
6 June 2023 in Journal of Nanoparticle Research
Nanoparticles are common active ingredients within many commercial products including sunscreen. Consequently, accurate characterisation of nanoparticles in these products is vital to enhance product design, whilst also understanding the toxicological implications of these nanoparticles. Whilst bulk techniques are useful in providing some information, they often cannot resolve individual particles, and therefore electron microscopy can be used for high-resolution nanoparticle characterisation. However, conventional high vacuum dry TEM does not accurately represent nanoparticle dispersions and other in situ methods must be used. Here, we use a combination of techniques including liquid cell transmission electron microscopy (LCTEM), cryogenic (cryo)-TEM and cryo-scanning electron microscopy (SEM) to characterise a commercial sunscreen containing titanium dioxide (TiO2) and zinc oxide (ZnO) nanoparticles. Our work illustrates that whilst LCTEM does not require any sample preparation more beam artefacts can occur causing ZnO dissolution with only TiO2 nanoparticles visualised. Comparatively, cryo-TEM allows characterisation of both ZnO and TiO2, yet only cryo-SEM could be used to analyse the pure product (without dilution) but biased the characterisation to the larger fraction of nanoparticles and agglomerates. Ultimately, only with a combination of different in situ EM techniques can an accurate characterisation of commercial products be achieved in order to ensure effective and safe product design and manufacture.
31 January 2025 in Journal of Microscopy
DADario Luis Fernandez Ainaga
Dario Luis Fernandez Ainaga
+2
Summary: Transmission electron microscopy can be used for the characterisation of a wide range of thin specimens, but soft matter and aqueous samples such as gels, nanoparticle dispersions, and emulsions will dry out and collapse under the microscope vacuum, therefore losing information on their native state and ultimately limiting the understanding of the sample.This study examines commonly used techniques in transmission electron microscopy when applied to the characterisation of cryogenically frozen Pickering emulsion samples. Oil‐in‐water Pickering emulsions stabilised by 3 to 5 nm platinum nanoparticles were cryogenically frozen by plunge‐freezing into liquid ethane to retain the native structure of the system without inducing crystallisation of the droplet oil cores.A comparison between the droplet morphology following different sample preparation methods has confirmed the effectiveness of using plunge‐freezing to prepare these samples. Scanning transmission electron microscopy imaging showed that dry droplets collapse under the microscope vacuum, changing their shape and size (average apparent diameter: ∼342 nm) compared to frozen samples (average diameter: ∼183 nm). Cryogenic electron tomography was used to collect additional information of the 3D shape and size of the emulsion droplets, and the position of the stabilising nanoparticles relative to the droplet surface. Cryogenic energy dispersive X‐ray and electron energy loss spectroscopy were used to successfully obtain elemental data and generate elemental maps to identify the stabilising nanoparticles and the oil phase. Elemental maps generated from spectral data were used in conjunction with electron tomography to obtain 3D information of the oil phase in the emulsion droplets.Beam‐induced damage to the ice was the largest limiting factor to the sample characterisation, limiting the effective imaging resolution and signal‐to‐noise ratio, though careful consideration of the imaging parameters used allowed for the characterisation of the samples presented in this study. Ultimately this study shows that cryo‐methods are effective for the representative characterisation of Pickering emulsions.
9 April 2024 in Journal of Microscopy
RDRik M. Drummond‐Brydson
+3
We present a comparison of common electron microscopy sample preparation methods for studying crystallisation processes from solution using both scanning and transmission electron microscopy (SEM and TEM). We focus on two widely studied inorganic systems: calcium sulphate, gypsum (CaSO4 center dot 2H2O) and calcium carbonate (CaCO3). We find significant differences in crystallisation kinetics and polymorph selection between the different sample preparation methods, which indicate that drying and chemical quenching can induce severe artefacts that are capable of masking the true native state of the crystallising solution. Overall, these results highlight the importance of cryogenic (cryo)-quenching crystallising solutions and the use of full cryo-TEM as the most reliable method for studying the early stages of crystallisation.