1 December 2016 in Egyptian Journal of Petroleum
In this study, low cost waste chicken fat (WCF) feedstock was used for fuel-like hydrocarbon production. The effects of varying reaction parameters on the hydrocracking of waste chicken fat using NiW/SiO2–Al2O3 catalyst were investigated. The reactions were carried out in a fixed bed down flow reactor at reaction temperatures of 400–450°C, liquid hourly space velocity (LHSV) of 1, 2, 4h−1, H2/oil molar ratio of 450 v/v and hydrogen pressures of 6.0MPa. The effects on hydrocracking conversion and distribution of products were investigated. The liquid product was analyzed using gas chromatography (GC) to quantify n-alkanes. Hydrocracking conversion and organic liquid products (OLPs) were evaluated by ASTM D-2887 distillation. The results showed that the catalytic hydrocracking of WCF generates fuels that have chemical and physical properties comparable to those specified for petroleum-based fuels. The amount of kerosene/diesel fractional product decreased with an increase in the temperature and a decrease in the LHSV; while gasoline like petroleum fuel increased. A considerable elimination of O2 from chicken waste fat molecules has been indicated by FTIR analysis. The oxygen removal pathway of WCF over NiW/SiO2–Al2O3 catalyst is primarily carried out by hydro-deoxygenation. The reaction was found to follow the second order mechanism, and the estimated activation energy Ea was 96kJmol−1. The exploited catalyst was employed in another run where the results showed the catalyst stability and can be used for several times
1 September 2015 in Egyptian Journal of Petroleum
Attempts have been made to understand the thermal degradation of high density polyethylene (HDPE) and their combined co-cracking using different ratios of HDPE and petroleum wax under nitrogen atmosphere. We have conducted the experiments using HDPE as the raw material and petroleum wax as co-feed by at 400 and 450°C reaction temperatures. The product distribution was noted along with reaction time of 0.5–3h for the degradation. Thermal gravimetric analysis (TGA) technique was used to measure the weight change of the feedstock as a function of temperature and time. Differential scanning calorimetry (DSC) was used to determine the degradation temperature. Products were characterized using gas chromatography (GC) and infrared spectroscopy (FTIR), some other standard physical methods were used to determine the main properties of the liquid products. Results show that the mixed plastic-wax samples could be converted into gases, gasoline, and middle distillate depending upon the composition of feed polymer/wax ratio. It was found that the products mostly consisted of paraffin and olefin compounds, with carbon numbers of C1–C4, C5–C9 and C10–C19 in the case of gases, gasoline and middle distillate respectively
1 December 2012 in Egyptian Journal of Petroleum
H-ZSM-5 zeolite catalysts were doped with 2%, 3% and 4%HF to be used for investigating their activities and selectivities for xylenes production and for para-xylene maximization at temperatures of 300–500 °C via toluene disproportionation. This doping caused pore size modification of the H-ZSM-5 catalyst. The reaction was carried out in a fixed bed flow type reactor. The ratio of produced para-xylene relative to its thermodynamic composition reached as high as 3.29 at 300 °C on the 4%HF doped H-ZSM-5 catalyst although this catalyst possessed the lowest amount of the largest pores (3.0–5.7 nm) and the smallest pores (0.4–1.7 nm). The overall activities of the catalysts were decreased with an increase in HF doping because of diffusion restriction. The kinetics of the reaction were simply treated and found to give Ea and ΔS∗ values compatible with the characterization data of the catalysts.