When ionizing radiations interact with polymers, free radicals are generated and are known to be the initiating species for the modification in materials. Monitoring and identifying free radicals after irradiation allow assessing the impact of X‐rays and gamma rays on materials. A comparative study has been performed on materials made from polypropylene and polyethylene after irradiation by the two irradiation technologies. Electron spin resonance (ESR) signal has been monitored up to 380 days when signal was still present. ESR signals, concentration profiles, and kinetics were observed after X‐rays and gamma rays.
1 January 2021 in Trends in Food Science & Technology
This research investigated the impact of gamma, e‐beam, and X‐ray irradiation on medical‐grade polypropylene (PP). A comprehensive array of analytical methods was employed to assess the chemical and physical changes in irradiated PP. The main findings revealed that irradiation did not significantly affect the mechanical properties, as tensile strength and elongation at break remained unaltered across all irradiation types and doses. Thermal analysis using DSC indicated a slight reduction in melting temperature at higher doses. ESR identified peroxyl radicals, which decayed similarly regardless of dose or irradiation type. Colorimetric analysis revealed yellowing in PP samples, particularly with gamma and X‐ray irradiation, likely associated with specific additives. HPLC analysis showed that the oxidation potential was more influenced by the PP formulation than by the irradiation technology.
23 July 2024 in Physical Chemistry Chemical Physics
Ionizing radiation induced transformations in materials were monitored through tracking of the generation and degradation processes of radical species.
The authentication of locust bean and guar powder gums requires usually the use of sophisticated and time-consuming analytical techniques. There is a need for fast and simple analytical techniques for the objective of a quality control methodology. Commercial locust bean and guar micronized powder gums present characteristic MIR spectra. Principal component analysis of the infrared spectra of these micronized powder gums allowed to distinguish locust bean from guar samples and to perform good classification results. The prediction of the two varieties was done without any ambiguity with a partial least square regression-discriminant analysis (PLS-DA). A simplex approach was used to generate binary blends mathematically taking into account the intrinsic variability of chemical composition of commercial products. The simulated spectral profiles allowed to develop predictive model of the percentage of gums in blends.