When ionizing radiations interact with polymers, free radicals are generated and are known to be the initiating species for the modification in materials. Monitoring and identifying free radicals after irradiation allow assessing the impact of X‐rays and gamma rays on materials. A comparative study has been performed on materials made from polypropylene and polyethylene after irradiation by the two irradiation technologies. Electron spin resonance (ESR) signal has been monitored up to 380 days when signal was still present. ESR signals, concentration profiles, and kinetics were observed after X‐rays and gamma rays.
22 September 2025 in Macromolecular Chemistry and Physics
This research investigated the impact of gamma, e‐beam, and X‐ray irradiation on medical‐grade polypropylene (PP). A comprehensive array of analytical methods was employed to assess the chemical and physical changes in irradiated PP. The main findings revealed that irradiation did not significantly affect the mechanical properties, as tensile strength and elongation at break remained unaltered across all irradiation types and doses. Thermal analysis using DSC indicated a slight reduction in melting temperature at higher doses. ESR identified peroxyl radicals, which decayed similarly regardless of dose or irradiation type. Colorimetric analysis revealed yellowing in PP samples, particularly with gamma and X‐ray irradiation, likely associated with specific additives. HPLC analysis showed that the oxidation potential was more influenced by the PP formulation than by the irradiation technology.
X-ray and electron-beam (E-beam) sterilization technologies were assessed to supplement gamma sterilization, the most common radiation technology used today for biopharmaceutical product sterilization. The mechanical properties of a PE/EVOH/PE film were studied using tensile tests and dynamical mechanical analysis after each irradiation technology (i.e., gamma, electron beam and X-ray irradiations). The effects of each irradiation were compared using two statistical methods. The results indicate that the three irradiation technologies induce no difference in mechanical properties in the investigated dose range for this material.
23 July 2024 in Physical Chemistry Chemical Physics
Ionizing radiation induced transformations in materials were monitored through tracking of the generation and degradation processes of radical species.
16 February 2024 in Radiation Physics and Chemistry
This study investigates the effects of gamma rays, X-rays, and electron beams on ethylene vinyl acetate (EVA) multilayer films, commonly used in biotechnological applications.