Screen printing technique has been used to manufacture a microsystem where the graphite-based electrodes hold both a functional and an architectural task. The thick film manufacturing technique has proved valid to develop a very low volume (ca. 20 μL) device where different electrochemical operations can be very efficiently performed. Biomolecule immobilisation within the microsystem for biosensors applications has been explored by inducing and optimizing the in situ generation of a potential pulse polypyrrole electropolymerised film entrapping either glucose oxidase or glucose dehydrogenase. This biomodified microsystem was applied to the ultrasensitive electrochemical detection of alkaline phosphatase yielding limits of detection below 10−12 M for glucose oxidase and of 10−15 M for glucose dehydrogenase modified systems, within 15 min of incubation time. The results obtained showed the advantages of using low volume microsystems in combination with an optimised polypyrrole–enzyme film, which displayed a good immobilisation efficiency in conjunction with a good diffusion of species through. Ultrasensitive detection of AP in combination with a stable and reproducible surface modification for entrapping of biomolecules opens the window for new electrochemical detection platform with great potential for integrated biosensor applications.
29 March 2017 in Analytical and Bioanalytical Chemistry
Pandemic preparedness for the surge of antimicrobial resistance (AMR) and newly emerging pathogens creates an urgent need for rapid diagnostic tools which can be mass manufactured and ideally used at the point of care. Quick adaptation to new diagnostic targets is thereby a key requirement. To meet this need, we developed 1) a sensitive, label-free electrochemical biosensor based on disposable graphene foam electrodes functionalised with peptide nucleic acid (PNA) probes and 2) a rapid and generic functionalisation strategy using pyrene-modified PNA probes co-immobilised with pyrene-butanol, which attach to the graphene via π-π stacking. This method preserves the excellent electronic properties of graphene foam and enables attractive biosensor performance. The optimised biosensor enabled amplification and label-free detection of the colistin resistance gene (mcr-1) with a limit of detection of 80 nM for synthetic ssDNA and 7.4 pM for bacterial plasmids. A key innovation of the presented study is a heat-assisted protocol that accelerates the biosensor functionalisation time over 300-fold (from 12 hours to two minutes) without compromising performance. The biosensor showed high target specificity and adaptability for detecting other molecular targets. This work establishes a versatile and stable biosensing platform, providing a significant advance towards the scalable manufacturing of decentralised diagnostics for AMR and other pandemic threats.
Lead is one of the most harmful water pollutants to both public and environmental health due to its high toxicity and non-biodegradability. Monitoring of lead contamination in water is done via expensive, static, laboratory-based techniques with lengthy timeframes. Moving lead monitoring to the field by using electrochemical sensors can allow for rapid, affordable and frequent testing on location. Using a 3D graphene foam, we show detection of lead accurately below the World Health Organisation limit in pure, tap and mineral water within five minutes. Portable, in-field testing is possible with 3D graphene foam sensors free from any toxic additives and a portable agitation unit with an attached app-operated potentiostat.