Hyaluronic acid (HA) and gelatin (Gel) are major components of the extracellular matrix of different tissues, and thus are largely appealing for the construction of hybrid hydrogels to combine the favorable characteristics of each biopolymer, such as the gel adhesiveness of Gel and the better mechanical strength of HA, respectively. However, despite previous studies conducted so far, the relationship between composition and scaffold structure and physico-chemical properties has not been completely and systematically established. In this work, pure and hybrid hydrogels of methacroyl-modified HA (HAMA) and Gel (GelMA) were prepared by UV photopolymerization and an extensive characterization was done to elucidate such correlations. Methacrylation degrees of ca. 40% and 11% for GelMA and HAMA, respectively, were obtained, which allows to improve the hydrogels’ mechanical properties. Hybrid GelMA/HAMA hydrogels were stiffer, with elastic modulus up to ca. 30 kPa, and porous (up to 91%) compared with pure GelMA ones at similar GelMA concentrations thanks to the interaction between HAMA and GelMA chains in the polymeric matrix. The progressive presence of HAMA gave rise to scaffolds with more disorganized, stiffer, and less porous structures owing to the net increase of mass in the hydrogel compositions. HAMA also made hybrid hydrogels more swellable and resistant to collagenase biodegradation. Hence, the suitable choice of polymeric composition allows to regulate the hydrogels´ physical properties to look for the most optimal characteristics required for the intended tissue engineering application.

Background: Pirfenidone (PFD) is a molecule that exhibits antifibrotic properties in a variety of in vitro and animal models of lung, liver and renal fibrosis. These pathologies share many fibrogenic pathways with an abnormal fibrous wound-healing process; consequently, tissue repair and tissue regeneration-regulating mechanisms are altered. Objective: To investigate the usefulness of PFD as an antifibrotic agent in clinical and experimental models of fibrotic disease. Conclusions: There is a growing understanding of the molecular effects of PFD on the wound healing mechanism, leading to novel approaches for the management of fibrosis in lung, liver and renal tissues. Although the optimum treatment for fibrosis remains undefined, it is possible that combined therapeutic regimens that include this wide-application molecule, pirfenidone, could offer a useful treatment for fibrotic disease.

Intraocular/Intravitreal implants constitute a relatively new method to treat eye diseases successfully due to the possibility of releasing drugs in a controlled and prolonged way. This particularity has made this kind of method preferred over other methods such as intravitreal injections or eye drops. However, there are some risks and complications associated with the use of eye implants, the body response being the most important. Therefore, material selection is a crucial factor to be considered for patient care since implant acceptance is closely related to the physical and chemical properties of the material from which the device is made. In this regard, there are two major categories of materials used in the development of eye implants: non-biodegradables and biodegradables. Although non-biodegradable implants are able to work as drug reservoirs, their surgical requirements make them uncomfortable and invasive for the patient and may put the eyeball at risk. Therefore, it would be expected that the human body responds better when treated with biodegradable implants due to their inherent nature and fewer surgical concerns. Thus, this review provides a summary and discussion of the most common non-biodegradable and biodegradable materials employed for the development of experimental and commercially available ocular delivery implants.

In order to provide a second economic life to agave fibers, an important waste material from the production of tequila, filaments based on polylactic acid (PLA) were filled with agave fibers (0, 3, 5, 10 wt%), and further utilized to produce biocomposites by fused deposition modeling (FDM)-based 3D printing at two raster angles (−45°/45° and 0°/90°). Differential scanning calorimetry, water uptake, density variation, morphology, and composting of the biocomposites were studied. The mechanical properties of the biocomposites (tensile, flexural, and Charpy impact properties) were determined following ASTM international norms. The addition of agave fibers to the filaments increased the crystallinity value from 23.7 to 44.1%. However, the fibers generated porous structures with a higher content of open cells and lower apparent densities than neat PLA pieces. The printing angle had a low significant effect on flexural and tensile properties, but directly affected the morphology of the printed biocomposites, positively influenced the impact strength, and slightly improved the absorption values for biocomposites printed at −45°/45°. Overall, increasing the concentrations of agave fibers had a detrimental effect on the mechanical properties of the biocomposites. The disintegration of the biocomposites under simulated composting conditions was slowed 1.6-fold with the addition of agave fibers, compared to neat PLA.

Purpose: To achieve a safer alternative to intravitreal injection of corticosteroids, we developed and characterized triamcinolone acetonide-loaded liposomes formulations (TA-LFs) to be used topically for vitreoretinal drug delivery. Methods: Four different 0.2% TA-LFs (TA-LF1 to TA-LF4) were generated and submitted to physicochemical characterization. Posteriorly, an ex vivo diffusion assay was performed using rabbit corneas as membranes. Finally, concentrations of triamcinolone acetonide (TA) were determined by high-performance liquid chromatography in ocular tissues from New Zealand white rabbits after multiple topical doses of TA-LF2 (6 times per day, 14 days). In addition, toxicity and tolerability of TA-LF2 was evaluated by cell viability assay and eye examination of study animals, respectively. Results: TA-LF2 was the most stable formulation maintaining a stable hidrogenion potential (pH) at 30 and 40°C and even improving encapsulation with higher temperature. TA-LF2 and TA-LF3 presented the best diffusion performance in vitro reaching the highest TA concentrations after 8 h of follow-up. In vivo diffusion and pharmacokinetics analysis showed that concentrations of TA in retina and vitreous reached the highest peak at 12 h after topical administration of TA-LF2 (252.10 ± 90.00 ng/g and 32.6 ± 10.27 ng/g, respectively) and subsequently decline to 24.0 ± 11.72 ng/g and 19.5 ± 13.14 ng/g, respectively, at 14 days of follow-up. Finally, cell viability was unaffected by TA-LF2, and no increase in intraocular pressure nor ocular alterations were observed after topical administration of this formulation in rabbits. Conclusion: TA-loaded liposomes, administered topically, can deliver TA in the vitreous cavity and reach the retina efficiently.

A multilevel factorial design of 2³ with 12 experiments was developed for the preparation of cellulose nanocrystals (CNC) from Agave tequilana Weber var. Azul bagasse, an agro-industrial waste from tequila production. The studied parameters were acid type (H₂SO₄ and HCl), acid concentration (60 and 65 wt% for H₂SO₄, 2 and 8N for HCl) temperature (40 and 60 °C for H₂SO₄, 50 and 90 °C for HCl), and hydrolysis time (40, 55 and 70 min for H₂SO₄; and 30, 115 and 200 min for HCl). The obtained CNC were physical and chemically characterized using dynamic light scattering (DLS), atomic force microscopy (AFM), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XDR) techniques. The maximum CNC yield was 90 and 96% for HCL and H₂SO₄, respectively, and the crystallinity values ranged from 88–91%. The size and morphology of A. tequilana CNC strongly depends on the acid type and hydrolysis time. The shortest CNC obtained with H₂SO₄ (65 wt%, 40 °C, and 70 min) had a length of 137 ± 68 nm, width 33 ± 7 nm, and height 9.1 nm, whereas the shortest CNC obtained with HCl (2 N, 50 °C and 30 min) had a length of 216 ± 73 nm, width 69 ± 17 nm, and height 8.9 nm. In general, the obtained CNC had an ellipsoidal shape, whereas CNC prepared from H₂SO₄ were shorter and thinner than those obtained with HCl. The total sulfate group content of CNC obtained with H₂SO₄ increased with time, temperature, and acid concentration, exhibiting an exponential behavior of $C_{SG}=a{e}^{bt}$.