This communication presents a novel systematic design of a high-aperture-efficiency and 2D beam-scanning nematic liquid-crystal (LC)-based reflectarray (LCRA) that operates in 6G mid-band (7-24 GHz). Despite a 260° phase range, the maximum aperture efficiency is 35.8% at a F/D ratio of 0.58, the highest aperture efficiency at the lowest F/D ratio among LCRAs designed to operate on the mmWave band. The proposed LC-based reflectarray unit cell (LC-RUC) has significantly low reflection loss compared to other LC-RUCs. Also, the bias topology of the proposed LC-RUC makes the LCRA capable of 2D beam-scanning. The beam scanning range of the proposed LCRA is ±50° on the xoz-plane and 0°~65° in the yoz-plane at 9.55 GHz. A 2 × 2 patch array antenna is designed as the feed antenna to achieve small F/D ratio system and ease of optimization. When designing the feed antenna, the number of elements or the element spacing is considered to achieve high feed efficiency. Additionally, the fabricated planar feed antenna can be easily integrated with a 3D printed jig in which the focal length can be adjusted for optimization. The lowest sidelobe level of the proposed LCRA is -15.5 dB.
A wide-angle reconfigurable reflectarray antenna (RRA) utilizing a miniaturized ring patch that can be efficiently controllable with a single bit is designed and experimentally verified. Based on the adoption of miniaturized radiating element and the elaborate study to optimize quantization efficiency considering reference phase and asymmetric phase difference, highly directive beam scanning is achieved in a wide ±60° range in both the $H$ - and $E$ - planes. Furthermore, the feeding structure to minimize focal diameter ratio (F/D) and maximize feeding efficiency such as illumination and spillover Efficiencies is studied, resulting in a low profile configuration with F/D=0.36. The fabricated RRA prototype was measured at 9.85 GHz (X-band) with the highest aperture efficiency of 28% and a 1 dB gain bandwidth of 530 MHz, respectively.
In this paper, a multi-functional transmitarray antenna consisting of miniaturized unit cells for S-band radar applications is proposed. The unit cell size is $0.4\lambda _{0}\,\,\times \,\,0.4\lambda _{0}$ , and it is composed of a receiving (Rx) antenna, a miniaturized inductively-loaded reflection-type phase shifter, a PIN diode switch for polarization conversion, and a dual-polarization transmitting (Tx) antenna. The types of Rx and Tx antennas are coupled-fed stacked patch antennas. The designed reflection-type analog phase shifter has a 36 % smaller area than the conventional reflection-type hybrid coupler-based phase shifter. It has a 3-bit phase-shifting capability realized with a 0 ~ 330° analog phase shifting. The designed SPDT PIN diode switch can select the polarization of the transmitted wave and accept a high input RF power of 23 dBm. The proposed 8 $\times8$ transmitarray antenna with F/D of 0.33, made from its unit cell, has a gain of about 7.9 dBi and performs 90° 2D beam steering for vertical-to-horizontal and vertical-to-vertical polarization conversions at the center frequency.
A new beam scanning method of a Fabry–Perot cavity (FPC) antenna is proposed. To obtain high gain in a target direction with a reduced sidelobe level (SLL), we devised a tapered partially reflective surface (PRS) as a superstrate. Moreover, to attain various beam scanning directions, a phase-controllable artificial magnetic conductor (AMC) ground plane with a broad reflection phase range and high reflection magnitudes was introduced. In the proposed method, a new formula to satisfy an FP resonance condition in a cavity for a scanned beam is also suggested. According to the formula, the FPC antenna can precisely scan the main beam in designed target directions with well-maintained high gain, which has been hardly achievable. In addition, our method demonstrates the potential of electrical beam-scanning antennas by employing active RF chips on the AMC cells. To validate the method, we fabricated a prototype FPC antenna for a scanned beam at θ = 30°. Furthermore, we conducted an additional simulation for a different beam scanning angle as well. Good agreement between the expected and experimental results verifies our design approach.
This study designed a multi-functional reconfigurable transmitarray with switchable polarization and beam steering capabilities using only a PIN diode having ON/OFF switching ability. The simulation confirmed that the proposed architecture is capable of 2D beam scanning of up to ±45° for elevation and azimuth while maintaining or converting linear polarization when operating within the X-band. The performance was verified through a far-field beam pattern measurement using the near-field antenna measurement system by producing a transmitarray with an 8 × 8 unit cell arrangement. The maximum level of gain of the proposed architecture was confirmed to be 14.5 dBi, the sidelobe level was below 14.5 dBc, the polarization converting loss was below 1.28 dB, and the polarization isolation level was above 14.7 dB. It can be utilized for the design technique of a radar system demanding small size, weight, power, and cost (SWaP-C) characteristics based on a simplified composition.
31 October 2021 in The Journal of Korean Institute of Electromagnetic Engineering and Science