A novel variant of particle swarm optimization (PSO), referred to as Fish Shoal Optimization (FSO), is developed to add an additional capability to its ancestor PSO to handle concurrently three different types of stones for the design of minimum cost earthen canals whose side slopes are riprap riveted and bottom is unlined with the most suitable type of stone. Costs of land acquisition and freeboard provision (fixed magnitude and depth-dependent scenarios) for a non-symmetric canal carrying sediment-laden flow are accounted for. The FSO concurrently handled various types of riprap stones in a single program to portray its resemblance with the biological character of a fish shoal (aggregation of mixed species of fish in nature). It allowed interaction of dissimilar species of shoal – the social characteristic of PSO and stiff competition – a feature of Genetic Algorithms, among their own and other groups’ members to yield the minimum cost design of canals having symmetric shape and angular particles as the most suitable revetment stone. The FSO yielded not only the minimum cost canals but also hydraulically efficient designs with 1.32, 4.86, 4.42, 4.28, and 4.40% less costs than those obtained by PSO for five different freeboard scenarios, respectively.
19 August 2009 in Particulate Science and Technology
A fluidized motion conveying system (FMCS) that conveys particulate material over a distance of 7.5 m was developed to investigate the influence of operating parameters on the material mass flow rate and bed depth. The effect of channel length (varied over 7.5 m, 5.5 m, and 3.7 m) was also investigated in relation to the observed variables. It is found that, for a given superficial air velocity, increase in conveying distance reduces the channel conveying capacity at all conveyor inclinations. The effect of superficial air velocity and channel inclination on material mass flow rate and bed depth, however, remains the same as reported earlier for 3.7 m channel length. The predicted material mass flux and operating superficial air velocity did not agree with the experimental data, thus, the empirical relations applicable to the design of air gravity conveyors for optimum yield were not valid for the design of FMCS.