6 March 2019 in IEEE Access
Several configurations of multi-beam reconfigurable THz antennas based on graphene have been investigated. Two modulation mechanisms of graphene-based THz antenna are introduced, one is the reflector-transmission window model, and the other is the reflector-director model (Yagi-Uda antenna). The main parameters, such as main beam direction, resonance frequency, peak gain, and front-to-back ratio of the proposed antenna, can be controlled by adjusting the chemical potentials of the graphene in the antenna. Moreover, this work provides an easy way to obtain complex graphene-based multi-beam antennas, showing a strong potential in the design of other complex graphene-based systems, enabling nanoscale wireless communications and sensing devices for different applications.
16 April 2018 in Nanoscale
A graphene/nanowire Schottky junction is a promising structure for low-cost high-performance optoelectronic devices. Here we demonstrate a graphene/single GaAs nanowire Schottky junction photovoltaic device. The Schottky junction is fabricated by covering a single layer graphene onto an n-doped GaAs nanowire. Under 532 nm laser excitation, the device exhibits a high responsivity of 231 mA W−1 and a short response/recover time of 85/118 μs at zero bias. Under AM 1.5 G solar illumination, the device has an open-circuit voltage of 75.0 mV and a short-circuit current density of 425 mA cm−2, yielding a remarkable conversion efficiency of 8.8%. The excellent photovoltaic performance of the device is attributed to the strong built-in electric field in the Schottky junction as well as the transparent property of graphene. The device is promising for self-powered high-speed photodetectors and low-cost high-efficiency solar cells.
24 September 2018 in Nanotechnology
We demonstrate a nanowire (NW) phototransistor with synaptic behavior based on inherent persistent photoconductivity. The device is comprised of a single crystalline InAs NW, covered by a native indium oxide layer acting as the photogating layer (PGL). In the negative photoresponse range, the device mimics synaptic neuromorphic behaviors of short-term plasticity, long-term plasticity (LTP), and paired-pulse facilitation. Moreover, the transition from short-term to LTP is observed as the stimulus intensity increases, behaving in accord with the feature of cooperativity. The synaptic behaviors of the device are attributed to the photo-generated electrons trapped/detrapped in the PGL. This NW-based photonic synaptic device would find promising applications in neuromorphic systems and networks.
5 August 2019 in Microwave and Optical Technology Letters
9 October 2018 in Microwave and Optical Technology Letters
17 June 2019 in Applied Physics Letters
InP nanowires are an important material for nanoscale electronic and optical devices. However, the crystal phase mixing and stacking faults severely degrade the device's performance. Here, we demonstrate high performance field-effect transistors and photodetectors based on high-quality InP nanowires. The ⟨110⟩-oriented InP nanowires, which are formed by spontaneous kinking from the original ⟨111⟩ nanowire roots, exhibit a stacking-faults-free zinc blende crystal structure. Based on the high-quality nanowire, the field-effect transistor exhibits a high electron mobility of 1438 cm2 V−1 s−1, much higher than that with stacking faults. A high responsivity of 5495 A/W is obtained from the photodetector, among the highest values reported for InP nanowire photodetectors. Moreover, the response/recovery time of the device is only 0.6/2.2 ms, 2–3 orders of magnitude shorter than other InP nanowire photodetectors. The high crystal quality and excellent electrical and optical properties make the zinc blende ⟨110⟩ InP nanowire a promising candidate for high performance electronic and optoelectronic devices.