In this study, we address the trajectory tracking control problem of a hydraulic-driven skid-steer mobile robot. A hierarchical control strategy is proposed to simultaneously consider the robot’s position control and the velocity control of the hydraulic motors. At the upper level, a nonlinear model predictive control (NMPC) method is employed to control the position and heading of the mobile robot. The NMPC controller takes into account the robot’s physical constraints and generates the desired robot motion velocity. Then, to control the hydraulic drive system, a current–velocity mapping-based control method is introduced. By establishing the mapping relationship between the control current applied to the hydraulic motor and its corresponding output velocity, the dynamics of the hydraulic motors are characterized. Consequently, the lower-level controller can directly obtain the control signal for the hydraulic actuator through lookup mappings. Additionally, PID controllers are adopted to compensate for velocity tracking errors. The proposed hierarchical control strategy decouples the robot’s position control and the hydraulic system control, simplifying the overall controller design, leading to improved control performance. To validate the effectiveness of the proposed control strategy, several experiments were conducted on a hydraulic-driven skid-steer mobile robot, and the results demonstrate the effectiveness of the proposed approach.
The 3D scanning system used in some engineering requires regular calibration, achieving a concise and efficient calibration process is crucial. A conventional method requires accurate marker coordinates relative to the scanning systems. Nevertheless, this procedure involves additional bulky measurement equipment. Although attempts have been made to calibrate the scanning system based on the shape of a calibration object, these approaches are limited to calibrating parameters that influence the shape of the scanned object. This study introduces an internal parameter self-calibration method for a 3D laser scanning system employing a 2D LiDAR and rotating platform. The calibration process involves using a cube with known side lengths as the calibration object. After calibrating specific geometric parameters, a calibration method based on single-coordinate information is proposed to correct other parameters that do not impact the scanned object’s shape. This calibration method is straightforward and suitable for rapid on-site engineering calibration. Experiments and simulations demonstrate the effective calibration of system parameters, and the accuracy of the scanning system was improved after calibration.
3D printing technology has been considered disruptive solution for next generation manufacturing. We will review various modality of this process from laser DMLM, E-beam, Binder-jet to high speed Light DMLS. Comparison of different technologies with pros and cons will be discussed based on actual industrial application. Future needs in part quality and throughput/productivity will play a critical role to drive the direction of next gen 3D printing technology.