24 February 2014 in Journal of Optical Communications and Networking
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
22 December 2017 in Journal of Optical Communications and Networking
The data-center interconnection (DCI) market has been rising sharply for some time, leading to the development of networking solutions tailored specifically for it. On the side of the transport network, DCI devices are characterized by simple, footprint-efficient designs focused on scalability, but still leverage the benefits of flexible-rate transponders on the line-side, to extract the most from costly optical transport infrastructures. Accompanying this evolution arose the need for a technology that could provide a flexible client layer where aggregation was done outside the transport device, but flows could still be efficiently mapped to flexible-rate transponder modules. In this context, the appearance of Flex Ethernet (FlexE) is targeted at decoupling the rates of interfaces connecting routers to transport boxes, from the actual flows traversing them. Through the introduction of an additional mapping/de-mapping layer, the capacity of multiple Ethernet interfaces can be virtualized in a resource pool for different flows. This paper addresses the application of FlexE to dense wavelength division multiplexing (DWDM) transport scenarios. Specifically, it evaluates how agnostic to FlexE a transport box should be, considering the potential trade-off between its complexity and the ability to efficiently fill lightpaths. Through a network simulation handling the provisioning of Ethernet flows in a DCI scenario, we evaluate the various FlexE use cases envisioned for transport networks, and how they affect the efficiency of router port usage and transport box provisioning, as well as their effect on the capacity of the DWDM layer.
13 December 2019 in Journal of Optical Communications and Networking
The recent interest in the upgrade and enhancements of metro transport networks and the availability of transponder cards with coherent receivers is opening the way to filterless solutions employing only passive splitters/couplers and optical amplifiers, potentially achieving significant capital expeditures and operating expenditures savings. However, the filterless option suffers from inefficiencies, mainly due to the broadcasting constraint and the reduced optical reach. To overcome such limitations, this paper proposes three complementary strategies to upgrade optical filterless metro networks (FMN). First, the number of supported channels is incremented by exploiting the full -band. To this end, two design architectures (i.e., Single and Dual Region) are proposed and evaluated, targeting double capacity with respect to the standard C-band and an upgrade to cost reduction. Second, we investigate a dual-architecture solution, extending metro deployments with a low-cost filterless and unamplified L-band system. Its design trade-offs are evaluated to determine its suitability in providing direct low-latency connectivity between metro-access nodes with the aim of supporting edge-computing platforms. Finally, the flexibility of the FMN is extended by introducing disaggregated transponders with different bitrates (i.e., 100 Gbps and 400 Gbps) and configurable transmission parameters, such as the modulation format and the forward error correction). Such flexibility is exploited through the extension of the OpenConfig YANG model of the optical line system, thus enabling automatic spectrum and transmission parameter assignment by means of a centralized software-defined-network controller and achieving better resource utilization. Simulation and experimental results are provided, showing the effectiveness and the potential impact of filterless metro solutions in future deployments and low-cost network upgrades supporting edge/fog clusters and 5G.
23 April 2012 in Journal of Optical Communications and Networking
The large investments required for deploying passive optical networks (PONs) render the disposal of appropriate planning tools for designing such networks in a cost-effective way a necessity. This paper addresses the problem of finding the least costly tree topology time-division multiplexing PON (TDM-PON) deployment configurations considering equipment and installation costs (CAPEX) and operational exploration costs. With this purpose, an integer linear programing model is developed, which is capable of designing not only common single-stage PON configurations, but also PONs with multiple stages of optical splitting. In order to reduce the computation time for problems of larger size, a two-stage heuristic is also proposed. The simulation results for the cases studied reveal that an optimal multistage splitting strategy can lead to cost savings of up to 15% in CAPEX expenditures in comparison with the traditional single-stage approach. Furthermore, the heuristic procedure proposed is shown to obtain results within acceptable bounds relative to the optimum solutions, hence validating its use for larger sized networks. The results also show that the average CAPEX cost savings between the two-stage and single-stage approaches are quite dependent on the strategies used to choose candidate locations for the splitters, with values ranging from 5 to 12% depending on whether random candidate placement or k-means-based placement is used.
9 June 2016 in Journal of Optical Communications and Networking
Fast developments in the transport network ecosystem are putting into question the foundations on which to base next-generation backbone networks. Flexibility is touted as an essential requirement to cope with traffic increasing in volume and unpredictability. Based on this principle, flexible transmission modules such as the sliceable bandwidth-variable transponder (SBVT) have been proposed to exploit the networking advantages of flexible-grid networks and more advanced modulation formats. Although the network-wide benefits of SBVTs have been the object of many studies, these do not usually consider the type of client architectures supporting them, which is critical in order to account for constraint introduced by specific architectures and emulate an operator’s management of its network infrastructure over time in a convincing way. The purpose of this paper is to perform a realistic techno-economic comparison between architectures based on fixed and flexible client- and line-side elements. The relevant parameters regarding cost, traffic, and equipment availability over each planning period are modeled and conveyed to a multi-period optimization framework based on integer linear programming models tailored to cost-effectively dimension the network for each client- and line-side architecture. The simulation examines the impact in each scenario of shifting client traffic patterns (from 10G/100G to 100G/400G) and the gradual introduction of higher-capacity network elements. Its results provide insight on the cost and spectrum utilization impact of deploying fixed transponders or SBVTs, coupled with fixed and flexible client-to-line interconnections, and how each of these alternatives copes with aggregated traffic increases of 400% over several years in national and pan-European backbone network topologies.