24 July 2023 in Archives of Mining Sciences
14 January 2022 in Frontiers in Earth Science
To simulate the moving boundary problems, the moving least square–based numerical manifold method, abbreviated as MLS-based NMM, was proposed. The MLS-based NMM has been applied successfully to open crack problems, which exhibits the high accuracy and strong robustness. In this study, we extend the MLS-based NMM to simulate the cracked rock considering the contact of the crack surface. Simultaneously, in order to simulate the progressive failure of the cracked rock, an improved strength-based criterion is proposed. The criterion is based on the Mohr–Coulomb criterion and maximum tensile stress criterion. Because rock can be regarded as a quasi-brittle material, a characteristic distance is used to calculate the crack tip stress and correct the crack propagation direction which avoids the phenomenon of “Zig-zag” for the crack propagation path based on the fracture mechanics criterion. The proposed strength-based criterion can acquire the crack tip stress and propagation direction and also realize the automatic determination of the crack propagation length in each step of the crack growth. A Brazilian disc problem and a rectangular plate problem are adopted to verify the numerical model. At last, the numerical model is applied to study the progressive failure process of the rock slope. The results indicate that the proposed method can deal with the crack propagation in the rock and the opening/sliding of rock blocks along discontinuities in a natural way.
18 October 2023 in KSCE Journal of Civil Engineering
Layered rock masses contain many pre-existing defects, and investigating their failure mechanism is crucial for controlling layered rock mass instability. In order to understand the layered rock fracture mechanism, this study develops sandstone combination models containing cracks of different angles using the Particle Flow Code software (PFC2D) to conduct the uniaxial loading tests. In addition, it analyzes the mechanical properties and fracture characteristics of the models. The pre-crack angles and the composite materials determine the mechanical properties and crack propagation of the sandstone combination (SC) models. The results indicated that the peak stress and elastic modulus of the SC models increase as the pre-crack angle rises. The force chain concentration and the crack initiation location change with the different pre-crack angles, and the initiation stress improves gradually. The entire acoustic emission (AE) process is divided into three phases per axial stress and AE event number. The AE active level significantly correlates with the pre-crack angle change. The “V” type trend is shown in the crack number distribution, and the tensile crack is the predominant mode with some shear cracks. The micro-crack concentration and macroscopic damage zones are more prevalent in the low-strength parts, and the pre-crack angles define the influence weight of the pre-crack angle and the composite material strength.
15 July 2019 in Geotechnical and Geological Engineering
1 January 2021 in Advances in Materials Science and Engineering
The geometric distribution of initial damages has a great influence on the strength and progressive failure characteristics of the fractured rock mass. Initial damages of the fractured rock were simplified as parallel cracks in different geometric distributions, and then, the progressive failure and acoustic emission (AE) characteristics of specimens under the uniaxial compression loading were analyzed. The red sandstone (brittle materials) specimens with the parallel preexisting cracks by water jet were used in the tests. The energy peak and stress attenuation induced by the energy release of crack initiation were intuitively observed in the test process. Besides, three modes of rock bridge coalescence were obtained, and wing crack was the main crack propagation mode. The wing crack and other cracks were initiated in different loading stages, which were closely related to the energy level of crack initiation. The propagation of wing crack (stable crack) consumed a large amount of energy, and then, the propagation of shear crack, secondary crack, and anti‐wing crack (unstable crack) was inhibited. The relationship between the crack propagation mode and the geometric distribution of existing cracks in the specimen was revealed. Meanwhile, the strength characteristic and failure mode of fractured rock with the different geometric distributions of preexisting crack were also investigated. The energy evolution characteristics and crack propagation were also analyzed by numerical modeling (PFC2D).
4 June 2018 in Geotechnical and Geological Engineering