24 January 2022 in Optics Express
Recent years have seen an unprecedented growth of data traffic driven by a continuous increase of connected devices and new applications. This trend will tend to saturate transparent optical networks that are the backbone of the whole telecommunication infrastructure. To improve the capacity of already deployed network infrastructures and maximize operators CAPEX returns, band-division multiplexing (BDM) has emerged as a promising solution to expand the fiber bandwidth beyond the existing C-band. Along with this, the demand for flexible and dynamically reconfigurable functionalities in each network layer is increasing. In this regard, optical networking is fast evolving towards the applications of the software-defined networking (SDN) paradigm down to the physical layer. The implementation of optical SDN requires the full abstraction and virtualization of each network element in order to enable complete control by a centralized network controller. To pursue this objective, photonics transmission components and their transmission functionalities must be abstracted to allow the definition of the control states and a real-time quality-of-transmission (QoT) evaluation of transparent lightpaths (LP). In this work, we propose an SDN based model of a photonic switching fabric that allows determining the control state and evaluating QoT degradation. Our investigations present a wideband optical switch design based on photonic integrated circuits (PICs), where QoT degradation is abstracted using a structure-agnostic approach based on machine learning (ML). The ML engine training and testing datasets are generated synthetically by software simulation of the photonic switch architecture. Results show the potential of the proposed technique to predict QoT impairments with high accuracy, and we envision its application in a real-time control plane.
12 September 2023 in Journal of Optical Communications and Networking
The capacity of the optical transport network must be expanded to support the increasing demand due to bandwidth-intensive applications. Multi-band transmission solutions can achieve this goal by exploiting the low-loss optical spectrum windows while maintaining the same existing fiber infrastructure, increasing the network’s capacity, and minimizing the operator capital expenditure (CAPEX) by limiting the need for a new fiber deployment. In the context of multi-band transmission, this work proposes a novel reconfigurable optical add–drop multiplexer (ROADM) architecture using a modular photonic integrated multi-band wavelength selective switch (WSS) that operates over multi-bands (S + C + L). This study focuses on conducting a comprehensive network performance analysis of different settings, enabling operation from 400G up to 800G using the proposed multi-band WSS on two real network topologies: German and Italian. The results provide the potential benefits of transitioning from traditional C-band transmission to multi-band transmission based on overall network performance.
16 October 2023 in Optics Express
Today, optical transport and data center networks extensively utilize photonic integrated systems due to their large bandwidth and a high degree of reconfigurability. In addition to these properties, photonic integrated-based systems can deliver an overall low fabrication cost, a small footprint, and low power consumption. In this perspective, we present a modular photonic integrated multi-band wavelength selective switch (WSS) capable of managing a wide spectrum, covering the three S+C+L bands, and potentially scalable to larger numbers of output fibers and routed channels. We propose a complete description of the device starting from the physical level, commenting on the device’s internal structure and design-related issues. Then, we move to the transmission level, providing a complete abstraction of the proposed WSS in the context of software-defined optical networks by providing a deterministic model to evaluate the routing controls, thermal spectral tunability, and the quality of transmission degradation. Finally, a transmission scenario operating on 400ZR standards and a network case study are also demonstrated to evaluate the performance of the proposed WSS in a single or multistage cascade setup.
13 January 2022 in Optics Continuum
The emerging Software Defined Networking (SDN) paradigm paves the way for flexible and automatized management at each layer. The SDN-enabled optical network requires each network element’s software abstraction to enable complete control by the centralized network controller. Nowadays, silicon photonics due to its low energy consumption, low latency, and small footprint is a promising technology for implementing photonic switching topologies, enabling transparent lightpath routing in re-configurable add-drop multiplexers. To this aim, a model for the complete management of photonic switching systems’ control states is fundamental for network control. Typically, photonics-based switches are structured by exploiting the modern technology of Photonic Integrated Circuit (PIC) that enables complex elementary cell structures to be driven individually. Thus PIC switches’ control states are combinations of a large set of elementary controls, and their definition is a challenging task. In this scenario, we propose the use of several data-driven techniques based on Machine Learning (ML) to model the control states of a PIC N×N photonic switch in a completely blind manner. The proposed ML-based techniques are trained and tested in a completely topological and technological agnostic way, and we envision their application in a real-time control plane. The proposed techniques’ scalability and accuracy are validated by considering three different switching topologies: the Honey-Comb Rearrangeable Optical Switch (HCROS), Spanke-Beneš, and the Beneš network. Excellent results in terms of predicting the control states are achieved for all of the considered topologies.
4 June 2025 in IEEE Photonics Journal
Grating-Assisted Contra Directional Couplers (GACDCs) are versatile photonic devices which can implement free-spectral-range free add-drop flat-top responses, making them interesting solutions for Wavelength Division Multiplexing (WDM) systems and many other applications requiring spectral shaping. Their bandwidth can be dynamically changed through thermal means, granting an additional degree of freedom in their design and application. Design techniques involving the periodicity of the gratings (pitch chirping) can enhance the effect of this dynamic control, leading to wider bandwidth tunability in terms of both central channel wavelength and passband width, while leaving the control mechanism and power unchanged. In this work, we investigate the limits of these effects, highlighting the advantages through simulation of both the optical response and the thermal control.