The reduction of system margin in open optical line systems (OLSs) requires the capability to predict the quality of transmission (QoT) within them. This quantity is given by the generalized signal-to-noise ratio (GSNR), including both the effects of amplified spontaneous emission (ASE) noise and nonlinear interference accumulation. Among these, estimating the ASE noise is the most challenging task due to the spectrally resolved working point of the erbium-doped fiber amplifiers (EDFAs), which depend on the spectral load, given the overall gain profile. An accurate GSNR estimation enables control of the power optimization and the possibility to automatically deploy lightpaths with a minimum margin in a reliable manner. We suppose an agnostic operation of the OLS, meaning that the EDFAs are operated as black boxes and rely only on telemetry data from the optical channel monitor at the end of the OLS. We acquire an experimental data set from an OLS made of 11 EDFAs and show that, without any knowledge of the system characteristics, an average extra margin of 2.28 dB is necessary to maintain a conservative threshold of QoT. Following this, we applied deep neural network machine-learning techniques, demonstrating a reduction in the needed margin average down to 0.15 dB.
10 February 2021 in Journal of Optical Communications and Networking
Precise computation of the quality of transmission (QoT) of lightpaths (LPs) in transparent optical networks has techno-economic importance for any network operator. The QoT metric of LPs is defined by the generalized signal-to-noise ratio (GSNR), which includes the effects of both amplified spontaneous emission noise and nonlinear interference accumulation. Generally, the physical layer of a network is characterized by nominal values provided by vendors for the operational parameters of each network element (NE). Typically, NEs suffer a variation in the working point that implies an uncertainty from the nominal value, which creates uncertainty in the GSNR computation and requires the deployment of a system margin. We propose the use of a machine learning agent trained on a dataset from an in-service network to reduce the uncertainty in the GSNR computation on an unused sister network, based on the same optical transport equipment and thus following the transfer learning paradigm. We synthetically generate datasets for both networks using the open-source library GNPy and show how the proposed deep neural network based on TensorFlow may substantially reduce the GSNR uncertainty and, consequently, the needed margin. We also present a statistical analysis of the observed GSNR fluctuations, showing that the per-wavelength GSNR distribution is always well-approximated as Gaussian, enabling a statistical closed-form approach to the margin setting.
With the evolution of 5G technology, high definition video, virtual reality, and the internet of things (IoT), the demand for high capacity optical networks has been increasing dramatically. To support the capacity demand, low-margin optical networks engage operator interest. To engross this techno-economic interest, planning tools with higher accuracy and accurate models for the quality of transmission estimation (QoT-E) are needed. However, considering the state-of-the-art optical network’s heterogeneity, it is challenging to develop such an accurate planning tool and low-margin QoT-E models using the traditional analytical approach. Fortunately, data-driven machine-learning (ML) cognition provides a promising path. This paper reports the use of cross-trained ML-based learning methods to predict the QoT of an un-established lightpath (LP) in an agnostic network based on the retrieved data from already established LPs of an in-service network. This advanced prediction of the QoT of un-established LP in an agnostic network is a key enabler not only for the optimal planning of this network but it also provides the opportunity to automatically deploy the LPs with a minimum margin in a reliable manner. The QoT metric of the LPs are defined by the generalized signal-to-noise ratio (GSNR), which includes the effect of both amplified spontaneous emission (ASE) noise and non-linear interference (NLI) accumulation. The real field data is mimicked by using a well reliable and tested network simulation tool GNPy. Using the generated synthetic data set, supervised ML techniques such as wide deep neural network, deep neural network, multi-layer perceptron regressor, boasted tree regressor, decision tree regressor, and random forest regressor are applied, demonstrating the GSNR prediction of an un-established LP in an agnostic network with a maximum error of 0.40 dB.
Recent years have seen an unprecedented growth of data traffic driven by a continuous increase of connected devices and new applications. This trend will tend to saturate transparent optical networks that are the backbone of the whole telecommunication infrastructure. To improve the capacity of already deployed network infrastructures and maximize operators CAPEX returns, band-division multiplexing (BDM) has emerged as a promising solution to expand the fiber bandwidth beyond the existing C-band. Along with this, the demand for flexible and dynamically reconfigurable functionalities in each network layer is increasing. In this regard, optical networking is fast evolving towards the applications of the software-defined networking (SDN) paradigm down to the physical layer. The implementation of optical SDN requires the full abstraction and virtualization of each network element in order to enable complete control by a centralized network controller. To pursue this objective, photonics transmission components and their transmission functionalities must be abstracted to allow the definition of the control states and a real-time quality-of-transmission (QoT) evaluation of transparent lightpaths (LP). In this work, we propose an SDN based model of a photonic switching fabric that allows determining the control state and evaluating QoT degradation. Our investigations present a wideband optical switch design based on photonic integrated circuits (PICs), where QoT degradation is abstracted using a structure-agnostic approach based on machine learning (ML). The ML engine training and testing datasets are generated synthetically by software simulation of the photonic switch architecture. Results show the potential of the proposed technique to predict QoT impairments with high accuracy, and we envision its application in a real-time control plane.
We propose the use of machine-learning based regression model to predict the quality of transmission (QoT) of an un-established lightpath (LP) in an un-seen network prior to its actual deployment, based on telemetry data of already established LPs of different network. This advance prediction of the QoT of un-established LP in an un-seen network has a promising factor not only for the optimal designing of this network but also enables the possibility to automatically deploy the LPs with a minimum margin in a reliable manner. The QoT metric of the LPs are defined by the Generalized Signal-to-Noise Ratio (GSNR) which includes the effect of both Amplified Spontaneous Emission (ASE) noise and Non-Linear Interference (NLI) accumulation. In the response of present simulation scenario, the real field telemetry data is mimicked by using a well reliable and tested network simulation tool GNPy. Using the generated data set, a machine-learning technique is applied, demonstrating the GSNR prediction of an un-established LP in an unrevealed network with maximum error of 0.53 dB.
1 October 2021 in Microwave and Optical Technology Letters
With the advancement in evolving concepts of software-defined networks and elastic-optical-network, the number of design parameters is growing dramatically, making the lightpath (LP) deployment more complex. Typically, worst-case assumptions are utilized to calculate the quality-of-transmission (QoT) with the provisioning of high-margin requirements. To this aim, precise and advanced estimation of the QoT of the LP is essential for reducing this provisioning margin. In this investigation, we present convolutional-neural-networks (CNN) based architecture to accurately calculate QoT before the actual deployment of LP in an unseen network. The proposed model is trained on the data acquired from already established LP of a completely different network. The metric considered to evaluate the QoT of LP is the generalized signal-to-noise ratio (GSNR). The synthetic dataset is generated by utilizing well appraised GNPy simulation tool. Promising results are achieved, showing that the proposed CNN model considerably minimizes the GSNR uncertainty and, consequently, the provisioning margin.