Jiabin Yan

Jiabin Yan

Auto-generated profile, based on publicly available information

Jiabin Yan

GaN Optoelectronic Integration International Cooperation Joint Laboratory of Jiangsu Province, Nanjing University of Posts and Telecommunications, Nanjing, China

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2018 in Journal of Microelectromechanical Systems
Verified
Journal Article
Closed access
JYJiabin Yan
Jiabin Yan
XLXiaoping Liao
Xiaoping Liao
DYDeyang Yan
Deyang Yan
YCYouguo Chen
Youguo Chen
Used for thermal energy harvesting, thermoelectric generator (TEG) can convert heat into electricity directly. Structurally, the main part of TEG is the thermopile, which consists of thermocouples connected in series electrically and in parallel thermally. Benefiting from massive progress achieved in a microelectromechanical systems technology, micro TEG (μ-TEG) with advantages of small volume and high output voltage has obtained attention in recent 20 years. The review gives a comprehensive survey of the development and current status of μ-TEG. First, the principle of operation is introduced and some key parameters used for characterizing the performance of μ-TEG are highlighted. Next, μ-TEGs are classified from the perspectives of structure, material, and fabrication technology. Then, almost all the relevant works are summarized for the convenience of comparison and reference. Summarized information includes the structure, material property, fabrication technology, output performance, and so on. This will provide readers with an overall evaluation of different studies and guide them in choosing the suitable μ-TEGs for their applications. In addition, the existing and potential applications of μ-TEG are shown, especially the applications in the Internet of things. Finally, we summarize the challenges encountered in improving the output power of μ-TEG and predicted that more researchers would focus their efforts on the flexible structure μ-TEG, and combination of μ-TEG and other energy harvestings. With the emergence of more low-power devices and the gradual improvement of ZT value of the thermoelectric material, μ-TEG is promising for applications in various fields. [2017-0610]

7 December 2018 in Journal of Microelectromechanical Systems
Verified
Journal Article
Closed access
JYJiabin Yan
Jiabin Yan
XLXiaoping Liao
Xiaoping Liao
SJSichao Ji
Sichao Ji
SZSen Zhang
Sen Zhang
This letter presents a novel MEMS-based thermoelectric-photoelectric power generator, which integrates a micro-scale thermoelectric generator (μ-TEG) and a solar cell on a single silicon chip by MEMS technology for the first time. To optimize the heat flux path of μ-TEG, one side of the thermocouple square array is on the interdigitated electrode of the solar cell and the other side is on the thick oxide passivation layer to realize thermal isolation. Moreover, the hot side and the cold side are insulated by a thick polyimide thermal insulating layer above the thermopile, and a series of square holes is created to enhance the thermal coupling between the thermopile and surrounding environment. Several common measures, like the back-surface field and oxide passivation layer with limited contact openings, are adopted for the design of the solar cell. All the measuring electrodes are on the same side of the device for the convenience of bonding wire and package. When a sputtered Al membrane covers the front side of the device, the maximum output voltage factor and the power factor of the μ-TEG are 0.149 V·cm⁻²,K⁻¹ and 3.03x 10⁻³ μ W·cm⁻²,·K⁻², respectively. When the front and back sides of device receive light, the measured photoelectric conversion efficiencies are 4.45% and 0.682%, respectively. [2018-0214]

7 July 2021 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
JYJiabin Yan
Jiabin Yan
LWLining Wang
Lining Wang
BJBolun Jia
Bolun Jia
ZYZiqi Ye
Ziqi Ye
HZHongbo Zhu
Hongbo Zhu
YWYongjin Wang
Yongjin Wang
The bandgap energies of the group III-V semiconductor gallium nitride (GaN) and its alloys cover emission wavelengths ranging from the ultraviolet to the visible. Concurrently, GaN has enabled high performance transistors to provide attractive solutions in the high voltage and high frequency regimes. Both GaN optoelectronics and electronics have been successfully developed, and the two technologies are often dependent on each other in many real-life applications. In the simplest case, both the GaN light-emitting diode (LED) and photodiode have to be driven or amplified by transistor-based circuits. However, these circuits are separately made on the Si platform. What if GaN optoelectronics and electronics can be integrated onto the same platform That would result in significant reduction in material costs, processing costs and packaging costs. At the same time, the performance of the monolithically integrated system will be significantly improved, due to reduced resistances and parasitic capacitances. In view of such prospects, we propose and characterize monolithically integrated GaN metal-oxide-semiconductor field effect transistors (MOSFETs), transmitter, waveguide, and receiver, which are fabricated onto a conventional InGaN/GaN LED wafer without involving re-growth or post-growth doping (diffusion or ion implantation). The capability of integrating optoelectronics (transmitter, waveguide, receiver) with MOSFETs would inevitably open up new horizons for the GaN platform.

23 December 2018 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
JYJiabin Yan
Jiabin Yan
XLXiaoping Liao
Xiaoping Liao
SJSichao Ji
Sichao Ji
SZSen Zhang
Sen Zhang
A novel multi-source micro power generator for harvesting thermal and optical energy is proposed for the first time. The fabrication of the power generator is compatible with complementary metal-oxide-semiconductor transistor technology. The device consists of a micro thermoelectric generator (μ-TEG) and a solar cell on a single chip. In order to optimize the heat flux path of the device, the two ends of the thermopile are insulated by the polyimide thermal insulating layer and oxide passivation layer. To improve the performance of the solar cell, the oxide passivation layer is perforated with limited metal contact openings and interdigitated poly-Si electrodes are adopted. The measured results show that if the liquid metal thermal grease covers the top side of the device, the maximum output voltage factor and power factor of the μ-TEG are 0.316 Vcm -2 K -1 and 6.34×10 -3 μWcm -2 K -2 , respectively. When the top and bottom sides of the device are chosen as the light-receiving surfaces, the measured efficiencies of the solar cell are 4.11% and 0.5%, respectively. In practical use, measuring electrodes on the same side and vertical injected/ejected heat flux path allow for convenient package.

31 October 2022 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
HZHao Zhang
Hao Zhang
JYJiabin Yan
Jiabin Yan
ZYZiqi Ye
Ziqi Ye
FSFan Shi
Fan Shi
JPJinlong Piao
Jinlong Piao
HAHiroshi Amano
Hiroshi Amano
GaN-based devices have grown rapidly in recent decades, due to their important research value and application prospects. There is a desire to monolithically integrate different GaN devices into a single chip for the development of future optoelectronic systems with low power consumption. In addition to improved multifunctional performance, a miniature integrated system can result in a significant reduction in material costs, processing costs, and packaging costs. In view of such prospects, we propose monolithic, top-down approaches to build III-nitride transmitter, modulator, waveguide, beam splitter, receiver, and monitor as a single unit onto a conventional GaN-on-silicon wafer without involving regrowth or postgrowth doping. Data communication among these components is realized through light propagation, opening up horizons for GaN optoelectronic systems on a chip.

27 December 2022 in Communications Engineering
Verified
Journal Article
Open access
PDF file
FSFan Shi
Fan Shi
HZHao Zhang
Hao Zhang
ZYZiqi Ye
Ziqi Ye
XTXianwu Tang
Xianwu Tang
FQFeifei Qin
Feifei Qin
Hiroshi AmanoHiroshi Amano
Hiroshi Amano
Optical fiber curvature sensors have been considered as a promising option for human motion detection due to its good toughness, bending flexibility and anti-electromagnetic interference. However, for wearable devices, the miniature configuration is preferred, and a high integration of the light emitter, receiver and guided fiber is essential to configure the miniaturized sensing system. Here, we present a miniaturized curvature sensing system by integrating a GaN-based optoelectronic chip with the plastical optical fiber (POF). The light emitter and detector are fabricated on a GaN-on-sapphire wafer to form a tiny chip sized at 2.5 $$\times$$ × 1.5 mm2. The on-chip photodetector (PD) effectively senses the reflected light intensity, extracting information on the fiber bending deformation. A compact curvature sensing system is demonstrated for finger motion detection with movement angles of 30–90° and frequencies of 0.4, 1, and 1.6 Hz. The results show that the monolithically integrated LED and PD chip can be combined with the POF with reliable operation. The demonstration of the monolithically integrated optoelectronic device suggests a promising potential technology for future wearable fiber optical sensor system.