Laser Institute and the International School for Optoelectronic Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, China
Auto-generated profile, based on publicly available information
Shuai Qu
Laser Institute and the International School for Optoelectronic Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan, China
Measurement accuracy of the optical frequency domain reflectometry (OFDR) will be deteriorated severely when the spatial resolution is improved due to the influence of the random noise, especially in long range distributed fiber optical sensing system. In order to eliminate the random noise, we have experimentally compared and analyzed the performance of OFDR system with and without the image processing methods in term of spatial resolution. The data arrays of the cross-correlation results are obtained after processing the collected distributed Rayleigh scattering signals along the sensing fiber, which can be used to construct a two-dimension (2D) image with the spectrum shift information induced by the strain. Thus, the image denoising methods can be applied to remove the random noise and improve the measurement accuracy. Based on this principle, two image denoising methods including the total variation method and the 2D Gaussian filter arithmetic are introduced to realize distributed sensing with high spatial resolution in long distance OFDR system. Experimental results show that the random noise can be suppressed and the outliers can be removed by the proposed methods. The strain gradients with high spatial resolution are identified effectively when the image denoising methods are used. Furthermore, spatial resolution with 1.3mm is achieved by the proposed methods with a wavelength sweeping rate of 20nm/s in 52m sensing fiber. The proposed methods provide a potential solution for OFDR system in long distance sensing with high spatial resolution, which is a significant step toward a high-performance OFDR system for practical applications.
Information sensor can realize the ubiquitous connection between objects and humans by the distributed fiber-optic sensor array, i.e., emerging infrastructure for Internet of Things, in which optical frequency domain reflectometry (OFDR) with its high spatial resolution plays an important role in achieving intelligent perception and identification of the objects. However, given a certain fiber length, there are tradeoffs among the processing speed, the spatial resolution, and the strain measurement range. In this article, a time optimization interpolation method and a distance domain compensation method are reported and experimentally verified to break the aforementioned tradeoffs for the first time. First, a full theoretical analysis on how to reduce the interpolation number and the reason why it is difficult to achieve high spatial resolution and large strain measurement and how to resolve it is made. Second in the proof-of-concept experiment, measurements of large strains up to 10 000 $\boldsymbol{\mu } \boldsymbol{\varepsilon }$ are realized along the sensing fiber with a spatial resolution of 2 mm using a conventional OFDR system. Also, the processing time is shortened by 76 times compared with the traditional processing method. This article makes a significant step toward high-performance OFDR system with fast processing, high spatial resolution, and wide strain measurement.
A sub-Nyquist random single-pulse sampling method based compressive sensing technique is proposed firstly to reconstruct signals under test in phase-sensitive optical time domain reflectometry (φ-OTDR). The key information of Rayleigh backscattering curves can be recognized after sparse transformation, which can be successfully reconstructed with far smaller number of measurements by orthogonal matching pursuit algorithm. Unlike the uniform sampling in conventional φ-OTDR system, pulse intervals are randomly modulated to generate a random single-pulse sequence in the proposed method in order to achieve random single-pulse sampling along every sensing point of the fiber. Experimental results verify that pulse sequences with average pulse repetition rate less than 2-kHz can be efficiently utilized to reconstruct an 8-kHz signal under test and obtain its frequency information, as well as to realize the detection of high frequency signals at different locations along the sensing fiber. It is demonstrated that the sampling rate is reduced greatly without any hardware modification compared to that required in the conventional method. This method can break the limits of the traditional Shannon-Nyquist sampling theorem to reconstruct signal, which is of great significance for the sensor performance enhanced in traditional φ-OTDR system.
The frequency response of phase-sensitive optical time-domain reflectometry ( $\Phi $ -OTDR) is strictly limited by the repetition rate of the injected sampling pulses in conventional sensing scheme. To fully reconstruct an arbitrary vibration signal, the pulse repetition rate is required to be lower bounded by twice the maximum frequency of the vibration signal according to the Nyquist sampling theorem and at the same time upper bounded by the sensing fiber length to avoid generations of mixed Rayleigh backscattered signals from more than one optical pulse within the sensing fiber, making high-frequency vibration sensing over long distance impossible. In this work, we propose a novel method based on the serial multi-coset sampling (MCS) strategy which can recover sparse broadband vibration signals with sub-Nyquist sampling rates, which is thus able to break through the tradeoff between the measurable vibration frequency bandwidth and the sensing range. Pulses with non-uniform intervals are adopted to realize MCS for the Rayleigh backscattered lights along the entire sensing fiber rather than the traditional uniform pulse train. A continuous to finite (CTF) block is used to determine the active spectrum ranges of the sparse signal. By using a serial MCS sequence with an average sampling rate of 4.8 kHz, both a 4 kHz single-frequency sinusoidal signal and a 0.2 kHz bandwidth chirped signal with a center frequency of 4.6 kHz were sampled and recovered successfully in the simulation. In experiments, a single frequency vibration signal of 15 kHz and a chirped vibration signal with frequency ranging from 15 to 16 kHz were successfully identified and reconstructed over a sensing distance of 4 km using an average sampling rate of 21.6kHz, respectively, which however is not possible in conventional $\Phi $ -OTDR system. Furthermore, accurate identification of a broadband vibration signal with a maximum frequency of 6 kHz over a 10km-long sensing fiber shows that this method is also practically valid in long-distance sensing.
With the rapid development of the high-speed railway industry, the safety of railway operations is becoming increasingly important. As a symmetrical structure, traditional manual patrol and camera surveillance solutions on both sides of the railway require enormous manpower and material resources and are highly susceptible to weather and electromagnetic interference. In contrast, a distributed fiber optic vibration sensing system can be continuously monitored and is not affected by electromagnetic interference to false alarms. However, it is still a challenge to identify the type of intrusion event along the fiber optic cable. In this paper, a railway intrusion event classification and location scheme based on a distributed vibration sensing system was proposed. In order to improve the accuracy and reliability of the recognition, a 1 DSE-ResNeXt+SVM method was demonstrated. Squeeze-and-excitation blocks with attention mechanisms increased the classification ability by sifting through feature information without being influenced by non-critical information, while a support vector machine classifier can further improve the classification accuracy. The method achieved an accuracy of 96.0% for the identification of railway intrusion events with the field experiments. It illustrates that the proposed scheme can significantly improve the safety of railway operations and reduce the loss of personnel and property safety.
In this study, a distributed multi-channel fiber-optic sensor for simultaneous measurement of relative humidity (RH) and temperature with finer gauge length based on spatial-domain time-delayed multiplexing is proposed and experimentally demonstrated. Simultaneous acquisition of multi-channel signals can be realized by reconfiguring the system layout in a spatial-domain time-delayed multiplexing manner by re-routing the Rayleigh backscattered signals for split-channel processing using only extra delay fibers and couplers instead of any optical switches extending the acquisition time or acquisition unit increasing the system cost. Sensing units comprised of copper (Cu)-coated fiber and polyimide (PI)-coated fiber are used to extract the changes of RH and temperature in the environment simultaneously thanks to the distinct sensitivities on RH and temperature of the two fibers. Experimental results show that the sensing system is able to realize multi-channel simultaneous measurement of RH and temperature with gauge length up to 10 mm. Besides, the system is proved to have excellent stability and reliability in high humidity environments. This novel and simple sensing technique for multi-channel dual-parameter simultaneous measurement will provide new ideas for development of economical, reliable, and practical RH and temperature sensing network.