3 July 2024 in Nature Communications
Polymeric thermal switches that can reversibly tune and significantly enhance their thermal conductivities are desirable for diverse applications in electronics, aerospace, automotives, and medicine; however, they are rarely achieved. Here, we report a polymer-based thermal switch consisting of an end-linked star-shaped thermoset with two independent thermal conductivity tuning mechanisms—strain and temperature modulation—that rapidly, reversibly, and cyclically modulate thermal conductivity. The end-linked star-shaped thermoset exhibits a strain-modulated thermal conductivity enhancement up to 11.5 at a fixed temperature of 60 °C (increasing from 0.15 to 2.1 W m−1 K−1). Additionally, it demonstrates a temperature-modulated thermal conductivity tuning ratio up to 2.3 at a fixed stretch of 2.5 (increasing from 0.17 to 0.39 W m−1 K−1). When combined, these two effects collectively enable the end-linked star-shaped thermoset to achieve a thermal conductivity tuning ratio up to 14.2. Moreover, the end-linked star-shaped thermoset demonstrates reversible tuning for over 1000 cycles. The reversible two-way tuning of thermal conductivity is attributed to the synergy of aligned amorphous chains, oriented crystalline domains, and increased crystallinity by elastically deforming the end-linked star-shaped thermoset.
20 January 2023 in Advanced Functional Materials
1 April 2022 in ACS Applied Materials & Interfaces
28 February 2020 in ACS Applied Materials & Interfaces
12 December 2025 in Advanced Science
Elastocaloric polymers, whose performance typically relies on phase transformation between amorphous chains and crystalline domains, offer a promising alternative to traditional refrigeration technologies. While engineering polymer‐network architecture has shown the potential to boost elastocaloric performance, the role of topological defects remains unexplored despite their prevalence in real polymers. This study reports a defect‐engineering approach in end‐linked star polymers (ELSPs) that enables an adiabatic temperature change of up to 8.14 ± 1.76 °C at an ambient temperature above 65 °C, showing an enhancement of 39% compared to ELSPs with negligible defects. This defect‐regulated solid‐state cooling is attributed to two competing effects of dangling‐chain defects on strain‐induced crystallization (SIC) and temperature‐induced crystallization (TIC), synergistically regulating the adiabatic temperature change. Specifically, increasing dangling‐chain defects monotonically lowers ELSPs’ mechanical performance at high temperatures due to suppressed SIC, but nonmonotonically impacts the mechanical performance at low temperatures due to the competition between suppressed SIC and enhanced TIC.
28 July 2025 in Research Square
Elastocaloric polymers, whose performance typically rely on phase transformation between amorphous chains and crystalline domains, offer a promising alternative to traditional refrigeration technologies. While engineering polymer-network architecture has shown the potential to boost elastocaloric performance, the role of topological defects remains unexplored despite their prevalence in real polymers. This study reports a defect-engineering approach in end-linked star polymers (ELSPs) that enables an adiabatic temperature change of up to 8.14± 1.6 °C at an ambient temperature of 60 °C, showing an enhancement of 39% compared to ELSPs with negligible defects. This defect-regulated solid-state cooling is attributed to two competing effects of dangling-chain defects on strain-induced crystallization (SIC) and temperature-induced crystallization (TIC), synergistically regulating the adiabatic temperature change. Specifically, increasing dangling-chain defects monotonically lowers ELSPs’ mechanical performance at high temperatures due to suppressed SIC, but nonmonotonically impacts the mechanical performance at low temperatures due to the competition between suppressed SIC and enhanced TIC.