30 June 2024 in Mining of Mineral Deposits
Purpose is to identify vertical displacements of the “soil basem strengthened with piles or micropiles based upon drilling-mixing technology” system relying upon parametric analysis of strain state of the mentioned system, and arrangement of the strengthening elements. Methods. Mathematical modeling took place for twelve finite-element models using the computing complex SCAD intended to analyze strength of structures by means of finite-element method. Numerical analysis was carried out with variation of elastic-strain modulus of vertical reinforcing elements and change in distance between them (3d and 6d of micropiles). Findings. Results of parametric analysis have been obtained for a model without a micropile (non reinforced soil base); a model with a single micropile; a model with two micropiles where distance between them is 1.5 m, i.e. 3d of micropiles; and a model with two micropiles where distance between them is 3.0 m, i.e. 6d of micropiles. The performed comparative analysis has made it possible to obtain the results proving the hypothesis by the authors as for the specific nature of vertical displacement formation of the “soil base strengthened with piles or micropiles based upon drill-mixing technology” system. Originality. It has been identified for the first time that basing upon the standardized document for the auger or displacement piles, it is impossible to decrease efficiently vertical displacements while approaching micropiles since distance between the micropiles is 3d for elements, developed on the basis of the drilling-mixing, is minimal. Practical implications. The obtained results of a strain state may become the keystone for the development of the genera-lized strain theory of the composite “soil base strengthened with piles or micropiles based upon drilling-mixing technology” system as a medium differing in minor changes of strain characteristics.
23 August 2019 in Materials Science Forum
NNNataliya Anatoliivna Nikiforova
Nataliya Anatoliivna Nikiforova
This article is devoted to the analysis of one of the most common structural designs of the steel frame of small spans, currently used in India in construction and reconstruction for seismic areas. This scheme constructively involves the implementation of the main bearing elements - bolts and columns - in the form of a spatial truss box section. At the same time, rather simple rolling profiles from small-sized corners are used, as well as a round steel bar. The studies performed by the authors were carried out using the finite element method based on the national design computing complex SCAD for Windows. The loads, as well as the geometrical characteristics of the profiles, were taken according to the current building standards of India. Based on the results of the analysis, a number of recommendations were formulated to improve the efficiency of the considered design scheme for seismic effects of varying intensity.
21 March 2019 in Eastern-European Journal of Enterprise Technologies
Analytical method for compiling and applying a ballast map for the traction unit PE2U
12 March 2024 in PRZEGLĄD POLICYJNY
11 September 2015 in Science and Transport Progress
Purpose. This paper is devoted to the definition of the most rational technique of reliability evaluation of facade systems of multistoried residential buildings with using the experience of buildings construction and operation abroad. The subject is also focused on defining the parameters of materials and facade systems, the improvement of which can increase the reliability and durability of facade systems of multistoried residential buildings, as well as cut the cost of their operation. Methodology. A comparative analysis of the operating experience of various types of facade systems in Ukraine and abroad based on the data of different authors was conducted. The analysis of the impact of external factors on facade systems with the subsequent comparison of methods for assessing the reliability of facades according to the criteria stated in the Eurocode was carried out as well as the selection of parameters that determine the reliability and durability of facade systems. Findings. Authors have performed researches of evaluation methods of organizational and technological reliability and durability of modern facade systems. It was identified the cause of the failure of facade systems. It is offered the ways of materials improvement of facade systems, and constructional and organization-technological decisions on the structure of facade systems. Methods of increase of reliability and durability of front systems were defined. Originality. The most rational technique of reliability evaluation of facade systems considering requirements of Eurocode in questions structural design was defined. Practical value. Improvement of evaluating methods for organizational-technological reliability of facade systems of multistoried residential buildings will predict more accurately the lifetime of enclosures. Using the methods described in the Eurocodes, to determine the reliability and durability of the facade systems will provide the general criteria for the building structures design in Ukraine and Europe, as well as facilitate the exchange of experience in the construction and operation of buildings between the countries of Europe. An analysis of the causes of failures of facades enables to determine the directions of improving the properties of the materials used for the manufacture of facade elements structures as well as engineering and technological solutions of applied facade systems.
28 June 2025 in Bridges and tunnels: Theory, Research, Practice
Purpose. The study aims to develop a comprehensive approach to calculating the residual service life of spatial multi-element steel bar structures, taking into account both predictable and random factors that affect the structures or their individual elements throughout their service life. Methodology. The key causes of corrosion damage are examined, and models of corrosion wear are analyzed, including those that consider the effects of mechanical stresses and aggressive environments. The use of different types of survivability indicators – both deterministic and stochastic – allows for a more accurate assessment of structural reliability under real operating conditions. It is noted that current construction standards insufficiently account for the time-dependent development of defects, which complicates the assessment of the residual service life of structures. The need for a comprehensive approach to forecasting the reliability and durability of steel structures in actual service conditions is emphasized. Findings. It is demonstrated that traditional calculation methods do not adequately assess the durability and survivability of structures with evolving defects. An approach to evaluating the survivability of steel structures is proposed, based on the use of both deterministic and stochastic indicators. This allows for consideration of both systematic and random changes in the behavior of the structural system. The advantage of mathematical modeling over physical modeling is substantiated, particularly in its ability to account for multiple scenarios of corrosion development and the complex interaction of corrosion with mechanical influences. Parameters characterizing the condition of a structure under corrosion wear have been identified. Originality. A comprehensive approach to assessing the reliability and survivability of bar-type steel structures under corrosion wear has been developed, based on a combination of deterministic and stochastic indicators. Mathematical models of corrosion damage are considered, taking into account the influence of both stress–strain state and aggressive environments. Practical value. The obtained results can be used in the design, diagnostics, and forecasting of the technical condition of bar-type steel structures operating in aggressive environments and exposed to various types of loads.