This work proposes a technique for placing electric vehicle charging stations using a bootstrapping-based probabilistic power flow. The methodology employs maximum likelihood estimation to model uncertainties in EV charging demand and establish robust confidence intervals for key system metrics. This approach was implemented in the Matpower simulation software within the IEEE-14 bus system, modeling the probabilistic load profile of 4500 EVs while considering 4000 realizations to obtain a wide spectrum of operation scenarios. The main results identified bus 9 as the optimal location for EV charging infrastructure, obtaining minimal active power losses (26.5 +/- 0.5 MW) and a maximum efficiency of 92.87 +/- 0.08 %. The strategic placement of charging stations is closely linked to the lowest active power losses, offering optimal efficiency. However, beyond an optimal placement, this paper aims to increase the robustness of modern grids, overcoming drawbacks related to the integration of electromobility infrastructure. The selection of the most representative features, combined with uncertainty analysis, contributes to an improved decision-making, emphasizing the need for supporting sustainable mobility.
En esta investigación se propone una metodología basada en ciencia de datos para estimar la factibilidad técnica de implementación de sistemas de potencia híbridos solares-eólicos, a partir del cálculo del factor de planta o factor de capacidad (CF). Los datos son obtenidos a partir de la estación meteorológica NOVALYNX 110-WS-18, entre el año 2018 y 2020, para determinar el potencial energético disponible en la sede Candelaria del campus de la Universidad de la Salle (Colombia). Mediante el uso del software Matlab, se aplica el algoritmo de agrupamiento de datos k-medias en los siguientes descriptores: tiempo, radiación solar, velocidad del viento y temperatura. Los resultados muestran que el sistema fotovoltaico y el sistema eólico tienen un CF correspondiente a 36.69 % y 2.15 % respectivamente. Se concluye que es factible técnicamente la implementación de un sistema fotovoltaico en la Universidad de La Salle; sin embrago, un sistema eólico no cumple con el CF mínimo.
1 July 2023 in Ingeniare. Revista chilena de ingeniería
En este trabajo se presenta un modelo matemático de eficiencias para sistemas híbridos Fuel Cell (FC), considerando las topologías serie (SH), paralelo (PH) y serie-paralelo (SPH). En estos sistemas, se implementaron convertidores Buck-Boost modulares no inversores. Sus funciones de eficiencia dependen de sus puntos de operación, particularmente de sus corrientes de salida y modos de operación (Buck, Boost y Buck-Boost). Además, la eficiencia del Bus de DC se ha modelado y utilizado en cada sistema, el cual corresponde una función del ciclo de trabajo de carga con una frecuencia de 100 Hz. La potencia pico y la tensión nominal de este bus de CC corresponden a 1,5 kW y 48 V, respectivamente. Estos sistemas híbridos fueron implementados en SIMULINK / MATLAB®, considerando condiciones iniciales de tensión o de precarga en los capacitores para reducir el tiempo de cómputo. Los resultados analíticos y experimentales se validan mediante el coeficiente de eficiencia de Nash-Sutcliffe (NSE).
1 February 2026 in International Journal of Electrical and Computer Engineering (IJECE)
Hydrothermal operation planning (HTOP) is a complex, large-scale optimal control problem. Traditionally, mathematical programming is used to solve it; however, metaheuristic techniques have emerged as an alternative approach. However, even in the context of current technological developments, the models developed to date generally require simplifications in the formulation. In particular, in medium-term planning, they have used a deterministic model or simplified transmission lines into a single bus. However, this approach leads to conservative and unrealistic solutions that may result in either oversizing or underutilization of resources. Therefore, this work proposes a methodology for incorporating uncertainties into the HTOP problem with a multi-bus topology. It was tested in a three-bus system, where linear functions are applied to simplify the production of hydroelectric plants and the cost of thermal units. The methodology incorporated well-established techniques in an implicit stochastic optimization (ISO) model, using a tree of 50 scenarios to model the hydrological series, which is solved with linear programming (LP). The results were validated with the costs of the 10000 generated series, showing an error of 5.07%. Additionally, the solutions were compared with an adapted metaheuristic technique for this problem to explore models applicable to more complex formulations.