20 September 2017 in Nature Communications
Spectroscopic ellipsometry is a means of investigating optical and dielectric material responses. Conventional spectroscopic ellipsometry is subject to trade-offs between spectral accuracy, resolution, and measurement time. Polarization modulation has afforded poor performance because of its sensitivity to mechanical vibrational noise, thermal instability, and polarization-wavelength dependency. We combine spectroscopic ellipsometry with dual-comb spectroscopy, namely, dual-comb spectroscopic ellipsometry. Dual-comb spectroscopic ellipsometry (DCSE). DCSE directly and simultaneously obtains the ellipsometric parameters of the amplitude ratio and phase difference between s-polarized and p-polarized light signals with ultra-high spectral resolution and no polarization modulation, beyond the conventional limit. Ellipsometric evaluation without polarization modulation also enhances the stability and robustness of the system. In this study, we construct a polarization-modulation-free DCSE system with a spectral resolution of up to 1.2 × 10−5 nm throughout the spectral range of 1514–1595 nm and achieved an accuracy of 38.4 nm and a precision of 3.3 nm in the measurement of thin-film samples.
31 August 2017 in Optics Express
We have developed a hyperspectral imaging scheme that involves a combination of dual-comb spectroscopy and Hadamard-transform-based single-pixel imaging. The scheme enables us to obtain 12,000 hyperspectral images of amplitude and phase at a spatial resolution of 46 µm without mechanical scanning. The spectral resolution given by the data point interval in the frequency domain is 20 MHz and the comb mode interval is 100 MHz over a spectral range of 1.2 THz centered at 191.5 THz. As an initial demonstration of our scheme, we obtained spectroscopic images of a standard test chart through an etalon plate. The thickness of an absorptive chromium-coated layer on a float-glass substrate was determined to be 70 nm from the hyperspectral phase images in the near-infrared wavelength region.
4 September 2015 in Optical Review
8 February 2017 in Optics Express
We propose two subpixel-shift (SPS) imaging methods: a normal SPS (NSPS) and an interleaved SPS (ISPS) method. Both methods use a series of cyclic-Hadamard-mask illuminations and a single channel detector that enhances lateral spatial resolution in proportion to the number of shifts. A sample object (or the illumination mask) is moved in two dimensions in micro-step intervals within the range of an illumination mask unit pixel (or within a range that exceeds it). To reconstruct the original image, we use a pseudo-inverse-matrix procedure that ensures measurement precision in a least-squares sense. Numerical simulation and experimental results obtained using a transmission microscope are shown. Further preliminary results indicate that the SPS method has the potential to enable measurements exceeding the diffraction limit of optics.
23 July 2020 in Optics Express
Spectroscopic polarimetry (SP) is a powerful tool for characterization of thin film, polarization optics, semiconductor, and others. However, mechanical polarization modulation of broadband light hampers its application for dynamic monitoring of a sample. In this article, we demonstrate the dynamic SP with features of polarization-modulation-free polarimetry and spectrometer-free spectroscopy benefiting from dual-comb spectroscopy (DCS) using a pair of optical frequency combs (OFCs). DCS enables the direct determination of polarization without the need for polarization modulation by using mode-resolved OFC spectra of amplitude and phase for two orthogonally linear-polarized lights while securing rapid, high-precision, broadband spectroscopy without the need for spectrometer. Effectiveness of the proposed system is highlighted by visualizing the hysteresis property of dynamic response in a liquid-crystal-on-silicon spatial light modulator at a sampling rate of 105 Hz.