2 March 2018 in Chemical Communications
An actuator driven by moisture gradients has been developed from a homogeneous graphene oxide film, relying on the in situ formation of a bilayer structure induced by water adsorption. This actuator shows efficient and controllable bending motions, coupled with the capability of lifting objects 8 times heavier than itself.
2 November 2017 in Nanoscale
Colloidal inks from polypyrrole@silica nanoparticles with 10–30 nm nanogranules can be directly written or stacked with ultrasmooth and uniform structural colors.
24 February 2020 in Nanoscale
Hygroresponsive actuators harness minor fluctuations in the ambient humidity to realize energy harvesting and conversion, thus they are of profound significance in the development of more energy-saving and sustainable systems. However, most of the existing hygroresponsive actuators are only adaptive to wet environments with limited moving directions and shape morphing modes. Therefore, it is highly imperative to develop a hygroresponsive actuator that works in both wet and dry environments. In this work, we present a bidirectional actuator responsive to both wet and dry stimuli. Our strategy relies on the introduction of carbon nanotubes to provide transport channels for water molecules. The actuation is enabled by the rapid transport of water in and out of the system driven by the moist/dry surroundings owing to the transport channels. The resultant actuator demonstrates reconfiguration and locomotion with turnover frequency F = 30 min−1, coupled with the capability of lifting objects 6 times heavier and transporting cargos 63 times heavier than itself. Oscillations (24°) driven by dry air flow in a cantilever display a high frequency (2 Hz) and large amplitude. Furthermore, a touchless electronic device was constructed to output varying signals in response to humid and dry environments. Our work provides valuable guidance and implications for designing and constructing hygroresponsive actuators, and paves the way for next-generation robust autonomous devices to exploit energy from natural resources.
14 February 2020 in Nanoscale
GCGabriel A. Calderon-Ortiz
Gabriel A. Calderon-Ortiz
+5
Conductive and transparent coatings consisting of silver nanowires (AgNWs) are promising candidates for emerging flexible electronics applications. Coatings of aligned AgNWs offer unusual electronic and optical anisotropies, with potential for use in micro-circuits, antennas, and polarization sensors. Here we explore a microfluidics setup and flow-induced alignment mechanisms to create centimeter-scale highly conductive coatings of aligned AgNWs with order parameters reaching 0.84, leading to large electrical and optical anisotropies. By varying flow rates, we establish the relationship between the shear rate and the alignment and investigate possible alignment mechanisms. The angle-dependent sheet resistance of the aligned AgNW networks exhibits an electronic transport anisotropy of ∼10× while maintaining low resistivity (<50 Ω sq−1) in all directions. When illuminated, the aligned AgNW coatings exhibit angle- and polarization-dependent colors, and the polarized reflection anisotropy can be as large as 25. This large optical anisotropy is due to a combination of alignment, polarization response, and angle-dependent scattering of the aligned AgNWs.
4 January 2022 in Journal of Materials Chemistry C
We demonstrate an effective strategy for brightness modulation via the surface charge treatment of electrodes. The brightness can be raised by 110% due to the growth of a colloidal lattice.
24 April 2024 in The Journal of Chemical Physics
The prevention of drying-induced cracking is crucial in maintaining the mechanical integrity and functionality of colloidal deposits and coatings. Despite exploring various approaches, controlling drying-induced cracking remains a subject of great scientific interest and practical importance. By introducing chain-like particles composed of the same material and with comparable size into commonly used colloidal suspensions of spherical silica nanoparticles, we can significantly reduce the cracks formed in dried particle deposits and achieve a fivefold increase in the critical cracking thickness of colloidal silica coatings. The mechanism underlying the crack suppression is attributed to the increased porosity and pore sizes in dried particle deposits containing chain-like particle, which essentially leads to reduction in internal stresses developed during the drying process. Meanwhile, the nanoindentation measurements reveal that colloidal deposits with chain-like particles exhibit a smaller reduction in hardness compared to those reported using other cracking suppression approaches. This work demonstrates a promising technique for preparing colloidal coatings with enhanced crack resistance while maintaining desirable mechanical properties.