1 February 2014 in Chemical Engineering Journal
11 October 2016 in Bulletin of Chemical Reaction Engineering & Catalysis
Basing on the experimental data the optimal parameters of the pyrolysis of heavy and residual hydrocarbons of oil were defined as follows: temperature of 500 °С; catalyst of CoCl2 with the catalyst loading 5% (wt.) of the substrate weight. Under the optimal conditions the kinetic investigation of the pyrolysis process was carried out using the thermogravimetric method. According to the investigation, it was found that the activation energy of the catalytic pyrolysis of oil-containing waste decreased by 20-30 kJ/mol in comparison to non-catalytic process.
29 June 2015 in RSC Advances
For the first time, the effects of iron-subgroup metal chlorides on polymer cord conversion to liquid and gaseous pyrolysis products have been studied. The optimum parameters for pyrolysis were identified (T = 450 °C, CoCl2 2 wt%). The presence of aprotic acidic centers of the iron-subgroup metal chlorides on the polymer cord was confirmed by FTIR. The catalytic effect of iron-subgroup metal chlorides is predominantly attributed to the acidic properties of the catalysts used.
15 December 2019 in Bulletin of Science and Practice
This paper presents a study of the process of thermal degradation of crosslinked polyethylene. The kinetics of polymer decomposition was studied by thermogravimetry. Crosslinked polyethylene showed high heat resistance to temperatures of 400 °C. The temperature range of 430–500 °C was determined for the loss of the bulk of the sample. According to thermogravimetric data, the decomposition process proceeds in a single stage and includes a large number of fracture, cyclization, dehydrogenation, and other reactions. The process of pyrolysis of a crosslinked polymer in a stationary-bed metal reactor was investigated. The influence of the process temperature on the yield of solid, liquid, and gaseous pyrolysis products was investigated. The optimum process temperature was 500 °C. At this temperature, the yield of liquid and gaseous products was 85.0 and 12.5% (mass.), Respectively. Samples of crosslinked polyester decomposed almost completely. The amount of carbon–containing residue was 3.5% by weight of the feedstock. With increasing temperature, the yield of liquid products decreased slightly and the yield of gaseous products increased, but their total yield did not increase. For gaseous products, a qualitative and quantitative composition was determined. The main components of the pyrolysis gas were hydrocarbons C1–C4. The calorific value of pyrolysis gas obtained at a temperature of 500 °C was 17 MJ/m3. Thus, the pyrolysis process can be used to process crosslinked polyethylene wastes to produce liquid hydrocarbons and combustible gases.
1 January 2016 in AIP Conference Proceedings