A new class of epoxy thermosets is presented, prepared using ammonium salts as hardeners, enabling the direct formulation of networks with ionic functionality from simple, industrially available building blocks. The curing process occurs in two distinct thermal stages: the formation of a fusible thermoplastic‐like intermediate, followed by crosslinking into an infusible thermoset. This intermediate behavior is highly unusual in epoxy systems and allows the material to be processed using methods typically applied to thermoplastics, such as extrusion. The practical relevance of this system is demonstrated through the fabrication of enduring prepregs that can be shaped and handled as thermoplastics during processing, but form crosslinked thermosets upon curing. Finally, the cured matrix can be chemically solubilized in aqueous nitric acid under relatively mild conditions, allowing efficient recycling of intact carbon fibers. This work introduces a scalable platform for functional epoxy networks with broad processing and application potential.
Organic ionic plastic crystals (OIPCs) are an emerging class of phase change materials for thermal energy storage. OIPCs are solid ionic materials with unique solid-solid phase transitions and high thermal stability but they also present mechanical stability and processability issues. In this work, polymerizable OIPCs are synthesized based on different monomers with acid functionalities such as (meth)acrylic acid and styrene sulfonic acid coupled with dioctylammonium groups as countercations. The synthesized five OIPC monomers by acid-base proton exchange reactions exhibit promising solid-solid and solid-liquid transitions, with melting energies of around 100 J/g. Upon polymerization, the resulting polymers predominantly exhibited glass transition behaviour rather than latent heat storage. In order to enhance thermal energy storage performance, composite systems combining polymerizable and molecular OIPCs were developed, showing solid-solid phase transitions at mild temperatures. Due to the support of a polymeric matrix, these membranes exhibited low leakage values (below 1%) together with freestanding solid film mechanical properties. Compression tests reveal that all composites withstand strains up to 80% without fracture, while maintaining stress values above 5 MPa. Overall, these results highlight the potential of polymer-OIPC composite membranes as promising solid-state thermal energy storage systems, by combining the mechanical integrity with the heat storage functionality.
Solid polymer electrolytes based on poly(ethylene oxide) (PEO) are promising alternatives to liquid electrolytes for safer lithium-ion batteries. Here, we report hierarchical solid polymer electrolytes obtained by selectively incorporating lithium sulfonamide-functionalized polymer nanoparticles (LiNPs) into a microphase-separated poly(vinyl benzyl methoxy poly(ethylene oxide) ether)-block-polystyrene block copolymer. Transmission electron microscopy (TEM), atomic force microscopy (AFM), and small-angle X-ray scattering (SAXS) demonstrate that the phase-segregated lamellar morphology of the block copolymer is preserved upon nanoparticle incorporation. Notably, the LiNPs preferentially localize within the poly(ethylene glycol)-rich lamellae, generating hierarchical structures with ordering across multiple length scales arising from block copolymer self-assembly, selective nanoparticle organization, and poly(ethylene glycol) crystallization. Differential scanning calorimetry (DSC) reveals that the crystallinity of the poly(ethylene glycol) phase depends strongly on nanoparticle loading and plasticizer content. These hierarchical electrolytes exhibit high ionic conductivity, which is further enhanced by the addition of sulfolane as a plasticizer. These results elucidate the interplay between hierarchical morphology, phase crystallinity, and ion transport in block copolymer-based solid electrolytes, providing design guidelines for mechanically robust solid electrolytes with enhanced transport performance.