Heavy metal pollution from industrial sources is a major environmental and health hazard on a global scale. This study introduces a solidification/stabilization method of industrial waste using a waste-based, ettringite-rich solid binder from ladle slag and gypsum for the immobilization of an industrial waste material with extremely high contents of several heavy metals. The importance of sulfate and water content on the immobilization efficiency and the use of citric acid to increase the processing time of the binder were studied. The leaching of Pb, Hg, Se, As, Cd, Cu, and Ni was measured, and X-ray powder diffraction, field-emission scanning electron microscopy, and field-emission electron probe microanalysis combined with wavelength-dispersive X-ray spectroscopy were used to analyze the structure of the hardened binder and the location of the heavy metals within. The study shows that the ladle slag/gypsum binder is suitable for the solidification/stabilization of heavy-metal-rich solid industrial waste. Hg, As, Cd, Cu, and Ni were fully immobilized in all scenarios covered in the study, whereas Pb and Se showed more complicated behaviors. The main immobilization method was encapsulation, and partial Se incorporation into ettringite was observed. The presence of citric acid increased the processing time of the binder without harming the immobilization, unless combined with low sulfate content.
Release of different heavy metals from various industries is a significant environmental hazard worldwide. In order to reduce the threat from these chemicals, different treatment methods are needed to make them harmless. This study approaches the problem by examining the effect of gypsum content for immobilization of selenium oxyanions selenite and selenate, and sulfate, with calcium sulfoaluminate belite (CSAB) cement-based ettringite binder systems. The study has two experimental sections. In the first section, an industrial filter sludge with high concentrations of selenium and sulfate is immobilized with CSAB and varying amounts of gypsum. The immobilization is efficient and reducing the gypsum amount in the hydrating mixture enhances the incorporation of both selenium and sulfate. The binding occurs through encapsulation and incorporation into ettringite and other hydrated phases. In the second section, two reagent grade sodium–selenium salts, sodium selenite and sodium selenate, are mixed with CSAB and varying amounts of gypsum. The immobilization is not effective and ettringite is not formed in large quantities, most likely due to high sodium content in the reacting system.