Jingcong He

Jingcong He

Auto-generated profile, based on publicly available information

Jingcong He

State Key Laboratory of Radio Frequency Heterogeneous Integration, College of Electronics and Information Engineering, Shenzhen University, Shenzhen, China

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 September 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Guoxiang ShuGuoxiang Shu
Guoxiang Shu
JLJiacai Liao
Jiacai Liao
JRJunchen Ren
Junchen Ren
JHJingcong He
Jingcong He
JDJunzhe Deng
Junzhe Deng
HWHe Wenlong
He Wenlong
The dispersion and dielectric attenuation characteristics of a double-staggered grating waveguide (DSGW) are two crucial features related to the output characteristics of a sheet-beam traveling-wave amplifier and have been previously studied by using theoretical analysis and simulations. In this work, these two characteristics are both experimentally studied. Two ${H}$ -band (220–325 GHz) DSGW circuit prototypes with and without dielectric attenuators made of the BeO-TiO 2 composite ceramic were machined by using nanocomputer numerical control milling. Experimental studies of the dispersion property were performed successfully where the measurement results were in good agreement with those predicted by simulations, exhibiting a wide passband of 70 GHz (230–300 GHz). The measured transmission coefficient has been decreased from −5 to −55 dB after the introduction of dielectric attenuators, experimentally verifying the feasibility of the adopted methodology. The effects of the variations of dispersion relation and transmission loss on the beam-wave interaction stability were also investigated.

3 November 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
JRJunchen Ren
Junchen Ren
Guoxiang ShuGuoxiang Shu
Guoxiang Shu
JHJingcong He
Jingcong He
JLJiacai Liao
Jiacai Liao
JDJunzhe Deng
Junzhe Deng
HWHe Wenlong
He Wenlong
The design, fabrication, and cold test of a mode generator to excite the circular TE 01 or TE 21 mode for ${H}$ -band (220–325 GHz) gyrotron traveling-wave-tubes (TWTs) are presented in this article. The mode generator is composed of two parts: a TE $^{\Box }_{10}$ –TE $^{\Box }_{20}$ mode converter based on a two-way H-T junction power divider and a TE $^{\Box }_{20}$ –TE $^{\circ }_{01}$ /TE $^{\circ }_{{21{ }}}$ mode converter with a tapered waveguide ( $^{{\Box { }}}$ and ° represent the rectangular and circular waveguide, respectively). By adjusting the ratio of width and height of the tapered waveguide, the TE $^{\circ }_{01}$ or TE $^{\circ }_{\vphantom {D_{l}}21}$ mode could be excited. The primary advantage of this technique is that it has a relatively compact and easy-to-fabricate configuration, which is especially useful in the terahertz-band. To verify the design, two identical mode generators joined back-to-back were manufactured and measured. The measured ${S}$ -parameters were in good agreement with the simulated ones, which predicted that the TE $^{\circ }_{\vphantom {D_{l}}21}$ /TE $^{\circ }_{01}$ mode generator obtained a 1-dB transmission bandwidth of ~38.1 and ~48.0 GHz, respectively. Meanwhile the reflection coefficient $S_{11}$ was below −10 dB over that bandwidth.

31 January 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Guoxiang ShuGuoxiang Shu
Guoxiang Shu
XXXinlun Xie
Xinlun Xie
JRJunchen Ren
Junchen Ren
GLGuangxin Lin
Guangxin Lin
QLQi Li
Qi Li
HWHe Wenlong
He Wenlong
The design, fabrication, and experimental measurement of a broadband and compact TE $^{\Box}_{\text{10}}$ –TE $^{\circ}_{\text{01}}$ (symbols $\Box$ $^{^{^{}}}$ and $\circ $ represent the rectangular and circular waveguides, respectively) mode converter is presented in this article. The proposed mode converter consists of three components, including a TE $^{\Box}_{\text{10}}$ –TE $^{\Box}_{\text{20}}$ mode converter based on a two-way H-T junction power divider, a TE $^{\Box}_{\text{20}}$ –TE $^{+}_{\text{22}}$ mode converter with variable cross-shaped waveguide, and a TE $^{+}_{\text{22}}$ –TE $^{\circ}_{\text{01}}$ mode converter. Two distinct design schemes have been employed for the first part of the TE $^{\Box}_{\text{10}}$ –TE $^{\circ}_{\text{01}}$ mode converter, which are based on two-way $^{^{^{}}}$ H-T junction power dividers with a path difference of odd times half-waveguide wavelength (Scheme 1) and a 180 $^{\circ}$ phase shifter (Scheme 2), respectively. This mode converter is highlighted by the significant advantage of high conversion efficiency over a wide bandwidth with a relatively easy-to-fabricate structure, which is evidenced by the measurement of two identical back-to-back joined mode converters based on Scheme 1. Measurement results matched with simulation ones within reasonable accuracy, which predicted that a 1-dB transmission bandwidth of $\sim$ 56.7 GHz was obtained. Meanwhile, the reflection coefficient S $_{\text{11}}$ was below $-$ 13.2 dB over that bandwidth.

18 July 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Guoxiang ShuGuoxiang Shu
Guoxiang Shu
JLJiacai Liao
Jiacai Liao
JHJingcong He
Jingcong He
JRJunchen Ren
Junchen Ren
JLJujian Lin
Jujian Lin
HWHe Wenlong
He Wenlong
A novel concept of combining the advantages of pseudospark (PS)-sourced electron beam (high beam current density), multiple-sheet-electron-beams (large total beam cross-sectional area), and high-order mode (HOM) slow wave structure (SWS) (high power capacity) to produce high-power terahertz signals is presented in this article. As an example, a sub-terahertz backward wave oscillator (BEO) driven by PS-sourced dual-sheet-electron-beams is designed. Measured results of the interaction circuit, including transmission/reflection coefficients and the dispersion relation, were in good agreement with simulation predictions. Beam-wave interaction simulations having considered the plasma effect and conductor loss predicted stable output signals with radiation power of 167.4–255.4 W over a tunable bandwidth of 234.4–241.0 GHz.

19 April 2022 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
Guoxiang ShuGuoxiang Shu
Guoxiang Shu
JLJiacai Liao
Jiacai Liao
JHJingcong He
Jingcong He
JRJunchen Ren
Junchen Ren
JDJunzhe Deng
Junzhe Deng
HWHe Wenlong
He Wenlong
A novel methodology for the beam-wave division/combination in a sheet beam traveling wave amplifier (SB-TWT) is proposed. The design, microfabrication, and measurement of an H -band (220–325 GHz) input–output coupling structures, which originates from an E -plane Riblet coupler with one shorted port, are presented in this article. To experimentally validate the proposed methodology, the designed input–output coupling structure was manufactured by using nanocomputer numerical control milling and measured by using a vector network analyzer. A 3-dB transmission bandwidth of ∼94.0 GHz (231.0–325.0 GHz, 33.8% fractional bandwidth) was measured, over which the measured reflection and isolation coefficients were smaller than –15.3 dB and –11.6 dB, respectively. Compared with other previously reported input–output coupling structures for SB-TWTs, this structure is highlighted by its superior comprehensive performance, including compact geometry, insensitive to the manufacturing tolerance, and good electrical performance over a wide frequency bandwidth, which makes it especially applicable in the terahertz-band operation.

4 April 2022 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
JLJiacai Liao
Jiacai Liao
Guoxiang ShuGuoxiang Shu
Guoxiang Shu
JHJingcong He
Jingcong He
JRJunchen Ren
Junchen Ren
JLJujian Lin
Jujian Lin
HWHe Wenlong
He Wenlong
This article presents the design, microfab- rication, and measurement of a terahertz band ${\mathrm {TE}}^{\Box }_{20}$ mode input–output coupling structure for dual-sheet-beam traveling-wave tubes (TWTs). The proposed coupling structure is based on an $E$ -plane Riblet slot coupler with one shorted port and a ${\mathrm {TE}}^{\Box }_{10}$ – ${\mathrm {TE}}^{\Box }_{20}$ mode converter. Compared to the previously reported high-order mode (HOM) coupling structures, the proposed structure possesses superior electrical and mechanical performance, including better reflection/transmission properties and relatively easy-to-fabricate configuration with features insensitive to fabrication tolerances. For verification, two $H$ -band (220–325 GHz) identical ${\mathrm {TE}}^{\Box }_{20}$ mode coupling structures joined back-to-back were manufactured and measured. Good agreement between the experimental results and the simulated responses is observed. The fabricated prototype of the coupling structure exhibits good electromagnetic (EM) performance over a bandwidth of 52.1 GHz (243.2–295.3 GHz) with a transmission coefficient better than −1.5 dB and a port reflection lower than −15.0 dB.