Department of Electronics Engineering, Korea National University of Transportation, Room No. 326, Smart ICT Building, 50 Daehak-ro, Chungju-si 27469, Republic of Korea
Auto-generated profile, based on publicly available information
Hyunju Kim
Department of Electronics Engineering, Korea National University of Transportation, Room No. 326, Smart ICT Building, 50 Daehak-ro, Chungju-si 27469, Republic of Korea
This study analyzed the recovery of channel potential according to the program states of adjacent cells. When the verify operation ended, and all voltages dropped to 0 V and the decreased potential of the floating channel caused by the down-coupling phenomenon was recovered continuously over time, regardless of the program states of adjacent WLs. The extent of channel potential recovery showed a similar tendency to that of the variation in the electron concentration of the floating channel. The electron–hole pair recombination decreased the electron concentration, resulting in channel potential recovery. When the adjacent WLs were programmed in a low state, additional electron–hole pair recombination and hole diffusion occurred in the floating channel. Therefore, the channel potential recovered quickly when the adjacent WLs programmed in a low state compared to when they programmed in a high state.
The channel potential of natural local self-boosting (NLSB) effects in 16-layer 3D NAND flash memory was analyzed according to transient time. After a program pulse was applied to the selected word line (WL) of the inhibited string channel, the channel potential of the selected WL increased owing to NLSB. The channel potential of the selected WL, increased by NLSB, was analyzed as a function of the threshold voltage (Vth) of the adjacent cell and according to the change in time. The analysis confirmed that the channel potential value decreased gradually over time. However, it was confirmed that the rate at which the channel potential decreases was different depending on the Vth of the adjacent cell. The number of electrons in nitride is different for each Vth. These electrons affect the holes of the spacer and channel. The analysis also confirmed that the movement of electrons was caused by the difference in the hole concentration in the spacer and channel.