Vinod Narayanan

Vinod Narayanan

Auto-generated profile, based on publicly available information

Vinod Narayanan

Oregon State University, Corvallis, OR

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

26 January 2022 in Science and Technology for the Built Environment
Verified
Journal Article
Open access
ERErfan Rasouli
Erfan Rasouli
EFEmily Fricke
Emily Fricke
VNVinod Narayanan
Vinod Narayanan
The design, fabrication, and experimental characterization of a counterflow Micro-pin array Polymer Heat eXchanger (MPHX) for HVAC applications is described. The design consists of water flow through microscale pin array plates, and airflow paths in a counterflow direction through adjacent rectangular channels. When compared to a Finned Tube Heat eXchanger (FTHX), the water plates take the place of fins and the crossflow tube bank is eliminated. The MPHX is fabricated by 3 D printing using a digital light synthesis method. A correlation-based model is developed and used to explore the parametric space to arrive at a baseline MPHX core geometry. Mechanical and fluidic simulations are performed on the baseline geometry to further develop the design. A sub-scale MPHX with a nominal cross duct area of 10.1 cm × 20.3 cm is designed and fabricated. Its thermal performance over a range of air and water flow rates corresponding to heat capacity rate ratios in the range of 0.25–1 is investigated. Results show that the effectiveness varies from 0.65 to 0.95 corresponding to a Cṙ  of 1 to 0.25. The experimental data are used to validate a correlation-based thermo-fluidic model of the MPHX. The validated model is further used to compare the performance advantages of the MPHX design over a FTHX. For a given heat exchanger volume and thermo-fluidic conditions, the MPHX transfers 55% more thermal energy when compared to a FTHX at comparable air-side pressure drops.

1 April 2013 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
SAS. Abishek
S. Abishek
RNR. Narayanaswamy
R. Narayanaswamy
VNV. Narayanan
V. Narayanan

14 January 2016 in Heat Transfer Engineering
Verified
Journal Article
Closed access
ERErfan Rasouli
Erfan Rasouli
VNVinod Narayanan
Vinod Narayanan
Single-phase heat transfer and pressure drop of liquid nitrogen in microscale heat sinks are studied experimentally in this paper. Effects of geometrical variations are characterized on the thermofluidic performance of staggered microscale pin fin heat sinks. Pitch-to-diameter ratio and aspect ratio of the micro pin fins are varied. The pin fins have square shape with 200 or 400 μm width and are oriented at 45 degrees to the flow direction. Thermal performance of the heat sinks is evaluated for Reynolds numbers (based on pin fin hydraulic diameter) from 108 to 570. Results are presented in a nondimensional form in terms of friction factor, Nusselt number, and Reynolds number and are compared with the predictions of existing correlations in the literature for micro pin fin heat sinks. Comparison of flow and heat transfer performance of the micro pin fin heat sinks reveals that at a particular critical Reynolds number of ∼250, pin fin heat sinks with the same aspect ratio but larger pitch ratio show a transition in both friction factor and Nusselt number. In order to better characterize this transition, visualization experiments were performed with the Fluorinert PF5060 using an infrared camera. At the critical Reynolds number, for the larger pitch ratio pin fin heat sink, surface thermal intensity profiles suggest periodic flapping of the flow behind the pin fins at a Strouhal number of 0.227.

10 January 2006 in Microfluidics and Nanofluidics
Verified
Journal Article
Closed access
PDF file
VPV.A. Patil
V.A. Patil
VNV. Narayanan
V. Narayanan

29 October 2009 in Journal of Physics: Condensed Matter
Verified
Journal Article
Closed access
JSJian Shen
Jian Shen
JLJames A Liburdy
James A Liburdy
DPDeborah V Pence
Deborah V Pence
VNVinod Narayanan
Vinod Narayanan
This study investigates the hydrodynamic characteristics of droplet impingement on heated surfaces and compares the effect of surface temperature when using water and a nanofluid on a polished and nanostructured surface. Results are obtained for an impact Reynolds number and Weber number of approximately 1700 and 25, respectively. Three discs are used: polished silicon, nanostructured porous silicon and gold-coated polished silicon. Seven surface temperatures, including single-phase (non-boiling) and two-phase (boiling) conditions, are included. Droplet impact velocity, transient spreading diameter and dynamic contact angle are measured. Results of water and a water-based single-wall carbon-nanotube nanofluid impinging on a polished silicon surface are compared to determine the effects of nanoparticles on impinging dynamics. The nanofluid results in larger spreading velocities, larger spreading diameters and an increase in early-stage dynamic contact angle. Results of water impinging on both polished silicon and nanostructured silicon show that the nanostructured surface enhances the heat transfer for evaporative cooling at lower surface temperatures, which is indicated by a shorter evaporation time. Using a nanofluid or a nanostructured surface can reduce the total evaporation time up to 20% and 37%, respectively. Experimental data are compared with models that predict dynamic contact angle and non-dimensional maximum spreading diameter. Results show that the molecular-kinetic theory's dynamic contact angle model agrees well with current experimental data for later times, but over-predicts at early times. Predictions of maximum spreading diameter based on surface energy analyses indicate that these models over-predict unless empirical coefficients are adjusted to fit the test conditions. This is a consequence of underestimates of the dissipative energy for the conditions studied.