15 April 2012 in Heat Transfer Engineering
This study investigates the effects of utilizing nanodiamond as an additive to engine oil on the heat transfer enhancement in laminar pipe flow. A plain tube with internal diameter of 6 mm was used as the test section and heated by an electrical coil heater to produce a constant heat flux thermal boundary condition. Thermal conductivity, specific heat, and viscosity of nanofluids were measured for various volume fractions and temperatures. In addition, convection heat transfer coefficients and Nusselt numbers of nanofluids were obtained for different nanoparticle concentrations as well as various Peclet and Reynolds numbers. Experimental results clearly indicate the heat transfer enhancement due to the presence of nanoparticles in the fluid. However, pressure-drop measurements showed significant increase due to addition of nanopowder to engine oil.
1 March 2018 in International Journal of Heat and Mass Transfer
9 February 2022 in Solar Energy
14 January 2016 in Heat Transfer Engineering
Single-phase heat transfer and pressure drop of liquid nitrogen in microscale heat sinks are studied experimentally in this paper. Effects of geometrical variations are characterized on the thermofluidic performance of staggered microscale pin fin heat sinks. Pitch-to-diameter ratio and aspect ratio of the micro pin fins are varied. The pin fins have square shape with 200 or 400 μm width and are oriented at 45 degrees to the flow direction. Thermal performance of the heat sinks is evaluated for Reynolds numbers (based on pin fin hydraulic diameter) from 108 to 570. Results are presented in a nondimensional form in terms of friction factor, Nusselt number, and Reynolds number and are compared with the predictions of existing correlations in the literature for micro pin fin heat sinks. Comparison of flow and heat transfer performance of the micro pin fin heat sinks reveals that at a particular critical Reynolds number of ∼250, pin fin heat sinks with the same aspect ratio but larger pitch ratio show a transition in both friction factor and Nusselt number. In order to better characterize this transition, visualization experiments were performed with the Fluorinert PF5060 using an infrared camera. At the critical Reynolds number, for the larger pitch ratio pin fin heat sink, surface thermal intensity profiles suggest periodic flapping of the flow behind the pin fins at a Strouhal number of 0.227.
1 July 2020 in Biosystems Engineering