In this investigation, hybrid aluminum matrix composites reinforced with Fe-based metallic glass (FMG) and SiC particles were synthesized using spark plasma sintering (SPS) at different sintering temperatures. The effects of sintering temperature on densification, phases, microstructure, and mechanical properties of the composites were evaluated. The findings indicate that the density of the sintered samples improved with increasing the sintering temperature. The X-ray diffraction results showed no remarkable difference in the phases of the samples sintered at different temperatures; only some small structural changes occurred in the metallic glass reinforcements. The sintering temperature had a significant effect on mechanical properties. For example, the hybrid aluminum matrix composite reinforced with 3 vol% FMG and 7 vol% SiC sintered at 550°C exhibited the ultimate compressive strength of 494 MPa, which is about 47% higher than the same composite sintered at 450°C.
A bulk hybrid composite to be potentially used as a foam precursor was produced in this study. TiH2 powder particles along with different concentrations of SiC were mixed with pure Al particles and consolidated through the spark plasma sintering (SPS) method. Bulk samples with nearly full density were successfully produced using the SPS method. During the consolidation process, no additional phases were found within the ceramic particles/matrix interfacial region. Using the ceramic TiH2 and SiC particles as the reinforcement cause notably strengthened the pure Al matrix (37% higher yield strength) without adversely affecting the plasticity, helping retain strain to fracture of about 50% for the sample. The yield strength of the samples was quantitatively approximated by examining their strengthening mechanisms via a number of simplified models available in the literature. The analyses found grain boundary and dislocation strengthening to be the most effective mechanisms for enhancing the strength of the samples; it was also found that the difference between the approximated and experimentally obtained overall yield strength was negligible.