15 August 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper introduces an adaptive multi-loop controller for capacitive wireless power transfer (WPT) systems. The new control approach combines continuous frequency tracking and matching networks tuning on both the primary and secondary to regulate a target current/power to the receiving side at the optimal power transfer conditions. This enables to effectively disengage the power delivery capabilities from the cross-coupling interactions between the transmitting and receiving sides, and to compensate for variations of the electrical circuits and capacitive medium. This paper highlights the complex functional relationships of the multi mixed-signal controller, and provides theoretical as well as practical insights on the dynamics and implementation of a closed-loop capacitive power transfer (CPT) system. The core of the multi-loop controller has been implemented through a digital orientation on an HDL platform. The effectiveness of the new controller is demonstrated on an experimental prototype of a resonant double-sided LC capacitive WPT that has been designed and implemented to operate in the MHz range. Experimental closed-loop operation is well demonstrated under various loads and medium conditions up to 200 mm air-gap, validating self-tuned CPT system. Furthermore, the capacitive interface has been methodically examined through Maxwell’s Finite Elements Analysis (FEA) tools for different structures, distances and alignments. The results of the FEA have been utilized to enhance the accuracy of the experiments, accounting for the variable coupling capacitance under variations.
17 May 2021 in IEEE Transactions on Power Electronics
This article introduces an adaptive self-tuned controller IC for resonant wireless power transfer (RWPT) transmitters. The controller IC comprises an on-the-fly very-high-frequency tracking hardware with high resolution and an independent high-resolution digital pulsewidth modulator (PWM)-based (HR-DPWM) current programmed control. These facilitate precise frequency generation as well as adaptive tuning of the reactive components in the matching network, which translate into tight current/power regulation capabilities while retaining optimized power transfer conditions on the transmitting side. The controller IC enables to effectively disengage the power-delivery capabilities from the variations of the resonators, electrical circuits, and wireless medium. The controller core is based on a fully synthesizable digital architecture that has been realized through HDL tools, and several key building blocks have been developed and described in detail: a delay-line-based phase detector, high-resolution digital frequency synthesizer, and HR-DPWM. To fully exploit the benefits of digital electronics, reduce power consumption, and save area, the digital core of the controller has been designed completely through asynchronous architecture, eliminating the need of high-speed clock and its related hardware. The mixed-signal controller IC has been designed, implemented, and fabricated in 0.18-μm 5-V CMOS process, resulting in effective silicon area of 0.6 mm 2 . To demonstrate the mixed-signal controller IC in closed-loop operation of a wireless power system, an experimental 20-W resonant capacitive-based WTP system has been designed and validated. The effectiveness of the controller is well demonstrated and evaluated at the MHz range up to 200 mm misalignment, meeting the strict requirements of resonant-based WPT systems.
31 July 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper introduces a new low voltage sub-nanosecond monolithic pulsed current driver for light detection and ranging (LIDAR) applications. A unique architecture based on a controlled current source and Vernier activation sequence, combined with a monolithic implementation, allow operation from low input voltage levels, high-resolution pico-seconds range pulse width, and rapid rise and fall times. An on-chip low voltage pulsed driver sub-nanosecond prototype has been implemented in a TS 0.18-μm 5-V-gated power management process. It incorporates an integrated wide range senseFET based current sensor and a rail-to-rail comparator for current regulation. A separate line of investigation has been carried out to characterize the avalanche capabilities of the integrated lateral MOSFET power devices required for the driver IC. Several lateral diffused MOS (LDMOS) power devices have been custom designed and experimentally evaluated for a life-cycle performance characterization. In addition, a delay-line (DL) based controller to govern the pulsed current driver IC is described and implemented on an FPGA. To validate the concepts of the high-resolution LIDAR current driver, both discrete and IC experimental setups have been constructed and evaluated, validating the method for currents up to 20 A peak in discrete and 5A in integrated solution. Post-layout analysis and the experimental evaluation of the driver IC have been found to be in very good agreement. The experimental results demonstrate overall improvement on several operation properties, such as rise time, fall time, and pulse width resolution, of over one-order of magnitude compared to the state-of-the-art silicon-based LIDAR drivers. For 5-V input, and a representative output pulse of 5-A, the results that have been obtained are: 900 ps rise time and fall time of 2.5 ns, all measured at the driver’s light output. In addition, the pulse width resolution has been enhanced to hundreds of ps, which is significantly below the intrinsic delay of the power switches.
1 August 2019 in IET Power Electronics
This study introduces a two‐port network‐based behavioural modelling approach for resonant‐operated capacitive wireless power transfer (WPT) systems. A simple, generic and unified modelling approach is developed to describe the behaviour of WPT systems, under changes of the source and load circuits, variations of the coupling interface and drifts of the components in the matching networks. The resultant model provides insights into the electrical cross‐coupling relationships between input and output parameters of the capacitive power transfer systems, including the effect of distance and alignment of the coupling plates. Regardless of the circuit complexity, it is demonstrated that the model core can be reduced to a basic gyrator relationship with added coefficients when required, thus obtaining a compact, closed‐form relationship between the input and output. To provide a simulation framework for capacitive medium variations, a simulation‐compatible model of the capacitive coupling using a continuous‐time variable capacitor has been constructed. The behavioural model and methodology have been validated through simulations and experiments. A 200 W experimental capacitive WPT prototype has been designed and examined for various air‐gaps up to 100 mm at a resonant operation of 1.56 MHz. A very good agreement is obtained between the theoretical predictions, simulations, and experimental results.