Evzelman Michael

Dr. Evzelman Michael

orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 October 2012 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Evzelman MichaelEvzelman Michael
Evzelman Michael
SBShmuel (Sam) Ben-Yaakov
Shmuel (Sam) Ben-Yaakov
A generic modeling methodology that analyzes the losses in switched capacitor converters (SCC) operating in open loop was developed and verified by simulation and experiments. The proposed analytical approach is unified, covering both hard- and soft-SCC topologies that include active switches and/or diodes. An important feature of the proposed model is that it expresses the losses as a function of the average currents passing through each flying capacitor during each switching phase. Since these currents are linearly proportional to the output current, the model is also applicable to SCC with multiple capacitors if it can be assumed that each of the subcircuits of the modeled SCC can be described or approximated by a first-order system. The proposed model can be used to assess the effect of the operational conditions of the SCC, such as switching frequency and duty cycle, on the expected losses. As such, the model can help in the optimization of SCC systems and their control to achieve high efficiency and the desired regulations.

1 September 2009
Verified
Conference Paper
Closed access
SBShmuel (Sam) Ben-Yaakov
Shmuel (Sam) Ben-Yaakov
Evzelman MichaelEvzelman Michael
Evzelman Michael
A generic modeling methodology that analyzes the losses in Switched Capacitors Converters (SCC) was developed and verified by simulation and experiments. The proposed analytical approach is unified, covering both hard and soft switched SCC topologies. The major advantage of the proposed model is that it expresses the losses as a function of the currents passing through each flying capacitor. Since these currents are linearly proportional to the output current, the model is also applicable to SCC with multiple capacitors. The proposed model provides an insight into the expected losses in SCC and the effects of their operational conditions such as duty cycle. As such, the model can help in the optimization of SCC systems and their control to achieve desired regulations.

1 September 2012
Verified
Conference Paper
Closed access
SBShmuel (Sam) Ben-Yaakov
Shmuel (Sam) Ben-Yaakov
ABAlon Blumenfeld
Alon Blumenfeld
ACAlon Cervera
Alon Cervera
Evzelman MichaelEvzelman Michael
Evzelman Michael
A switched-capacitor based equalization scheme is proposed for overcoming the adverse effect of shaded panels in a serially connected PV array. The proposed solution is based on a modular approach, in which each two panels are connected to a resonant switched-capacitor converter. The distribution of currents and power extraction improvement have been derived and verified experimentally and design guidelines to meet desired power loss level requirements have been developed. The experimental equalizing module was designed for 185W PV panels and was found to boost the maximum available power by about 50% when interfaced with two serially connected PV panels under insolation ratios between 20% and 100%. The analytical, simulation and experimental results suggest that the proposed approach is effective in extracting all available power with relatively high efficiency.

1 February 2012
Verified
Conference Paper
Closed access
SBShmuel (Sam) Ben-Yaakov
Shmuel (Sam) Ben-Yaakov
Evzelman MichaelEvzelman Michael
Evzelman Michael
A generic behavioral average circuit model of a Switched Capacitor Converter (SCC) is proposed and verified. The model is based on the average currents concept and assumes that each of the SCC subcircuits can be described or approximated as a first order network. The model can be used to calculate or simulate the average static, dynamic and small signal responses of the SCC. The model is valid for all operational modes of a SCC (complete, partial and no charge) and is compatible with any circuit simulator that includes dependent sources. Excellent agreement was found between the behavior of the proposed average model, full circuit simulation, and experimental results.

31 July 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
EAEli Abramov
Eli Abramov
Evzelman MichaelEvzelman Michael
Evzelman Michael
MPMor Mordechai Peretz
Mor Mordechai Peretz
This paper introduces a new low voltage sub-nanosecond monolithic pulsed current driver for light detection and ranging (LIDAR) applications. A unique architecture based on a controlled current source and Vernier activation sequence, combined with a monolithic implementation, allow operation from low input voltage levels, high-resolution pico-seconds range pulse width, and rapid rise and fall times. An on-chip low voltage pulsed driver sub-nanosecond prototype has been implemented in a TS 0.18-μm 5-V-gated power management process. It incorporates an integrated wide range senseFET based current sensor and a rail-to-rail comparator for current regulation. A separate line of investigation has been carried out to characterize the avalanche capabilities of the integrated lateral MOSFET power devices required for the driver IC. Several lateral diffused MOS (LDMOS) power devices have been custom designed and experimentally evaluated for a life-cycle performance characterization. In addition, a delay-line (DL) based controller to govern the pulsed current driver IC is described and implemented on an FPGA. To validate the concepts of the high-resolution LIDAR current driver, both discrete and IC experimental setups have been constructed and evaluated, validating the method for currents up to 20 A peak in discrete and 5A in integrated solution. Post-layout analysis and the experimental evaluation of the driver IC have been found to be in very good agreement. The experimental results demonstrate overall improvement on several operation properties, such as rise time, fall time, and pulse width resolution, of over one-order of magnitude compared to the state-of-the-art silicon-based LIDAR drivers. For 5-V input, and a representative output pulse of 5-A, the results that have been obtained are: 900 ps rise time and fall time of 2.5 ns, all measured at the driver’s light output. In addition, the pulse width resolution has been enhanced to hundreds of ps, which is significantly below the intrinsic delay of the power switches.

1 November 2010
Verified
Conference Paper
Closed access
Evzelman MichaelEvzelman Michael
Evzelman Michael
SBShmuel (Sam) Ben-Yaakov
Shmuel (Sam) Ben-Yaakov
Switched Capacitor Converters (SCC) losses are analyzed and the rules for the selection of SCC parameters (such as switch resistances, capacitors values and switching frequency) to meet specific efficiency requirements, are developed. This is done by first applying an advanced methodology for calculating the equivalent resistance (Re) of the SCC in general. The impact of each of the parameters on the equivalent resistance is then analyzed and the results are used to develop design rules to meet efficiency targets as defined. The paper clarifies an apparent paradox related to the role of switch resistances in SCC which seem not to affect the efficiency considering the fact that the efficiency is determined by the SCC voltage transfer ratio. The results of this study could help designers of SCC to select optimal values of the SCC parameters that will meet specifications. The analysis developed in this study can also assist users of SCC to better understand the characteristics and limitations of commercially available SCC.