16 July 2021 in IEEE Internet of Things Journal
The Internet of Vehicles (IoV) may enhance road safety, improve traffic flow, etc. However, Internet-connected intelligent vehicles (IVs) are vulnerable to cyber-attacks. One of the important challenges in IoV is thus, verifying data integrity with strict latency requirements. The conventional way of providing data integrity in the Internet cannot be applied to IoV due to excessive overhead and latency. Therefore, most commercially available IVs do not use any security mechanisms for delay-sensitive traffic. However, if a road side unit (RSU) has been compromised, it can tamper with the data sent or received by IVs. To solve this issue, this article presents a light-weight mechanism called DRiVe to establish data integrity for the IVs and detect malicious RSUs. The DRiVe is based on a probabilistic model to identify malicious RSUs using specially constructed authentication techniques. The authentication parameters are only sent when a vehicle leaves the coverage area of one RSU and enters that of another. DRiVe does not employ any computationally intensive cryptographic primitives. This significantly reduces the security overhead introduced by sending message authentication codes (MACs) with each packet. A security and performance analysis shows that DRiVe can not only identify malicious RSUs effectively but can do so without introducing any significant communication overhead or latency. The proposed scheme reduces the number of bits transmitted by approximately 7% and decreases the latency incurred by 7.5%. For the scenario where malicious vehicles are present, the proposed scheme achieves a probability of detection close to 99%.
14 July 2021 in IEEE Wireless Communications Letters
Vehicular networks, like any other wireless networks, are prone to jamming due to the inherent nature of the wireless environment. In this letter, we consider an attacker who jams the network whenever he observes that a packet is being transmitted, i.e., some communication happening in the network. Such a strategy leads to an increase in the packet drop rate and latency of the network. This causes serious disruption of delay-sensitive applications that can lead to life endangering situations and therefore such an attack needs to be addressed. In this letter, we propose a mechanism that uses a support vector machine to detect the presence of a jammer in the network. We obtain jointly sufficient statistics of packet drop probabilities and use them to generate the training data. The results demonstrate the effectiveness of the proposed detection system.
12 June 2019 in IEEE Transactions on Information Forensics and Security
Clustering Internet of Things (IoT) Networks, to alleviate the network scalability problem, provides an opportunity for an adversary to compromise a set of nodes by simply compromising the relay they are associated with. In such scenarios, an adversary who has compromised the relay can affect the network’s performance by deliberately dropping the packets transmitted by the IoT devices and/or by corrupting the packets to be forwarded by the relay. In this way, the adversary can successfully mimic a bad radio channel between the IoT devices and the relay, thereby requiring the IoT devices to retransmit more frequently. Such a strategy increases the processing load on the IoT devices and will drain their batteries at a faster rate. To detect such an attack, we present hybrid intrusion detection systems that rely on the monitoring of uplink and downlink packets transmitted between IoT devices and the relay. Specifically, we compare the observed packet drop probabilities against their long-term expected values. The detection rules proposed originate from the generalized likelihood ratio test, where the adversary parameters are estimated using maximum likelihood estimation. A semi-analytical approach to obtain the expressions for the false alarm probability is presented in order to determine the decision thresholds. Results presented show the effectiveness of the proposed detection systems, demonstrate the impact of the choice of adversary parameters on them and validate the expressions obtained for the false alarm probability.
5 August 2022 in IEEE Communications Letters
Vehicular Edge Computing (VEC) enables vehicles to offload tasks to the road side units (RSUs) to improve the task performance and user experience. However, blindly offloading the vehicle’s tasks might not be an efficient solution. Such a scheme may overload the resources available at the RSU, increase the number of requests rejected, and decrease the system utility by engaging more servers than required. This paper proposes a Markov Decision Process based Reinforcement Learning (RL) method to allocate resources at the RSU. The RL algorithm aims to train the RSU in optimizing its resource allocation by varying the resource allocation scheme according to the total task demands generated by the traffic. The results demonstrate the effectiveness of the proposed method.
13 April 2026 in IEEE Transactions on Cognitive Communications and Networking
The rapid evolution of 5G and beyond-5G (B5G) networks, coupled with the emergence of network slicing, has introduced unprecedented challenges in resource allocation for Radio Access Networks (RAN). Existing methods primarily fall into two categories: i) reactive approaches, which fail to anticipate sudden traffic changes; ii) predictive methods, which struggle to adapt to real-time conditions. These limitations result in inefficient resource utilization, degraded Quality of Service (QoS), and increased latency. To address these challenges, we propose PreNS, a hybrid framework that integrates predictive modeling with real-time decision-making to optimize resource allocation. PreNS combines an attention-based Bi-LSTM model for accurate traffic demand forecasting with a Double Deep Q-Network (DDQN) for real-time adjustments. Its key innovation lies in the aggregated state representation, which fuses predicted demands and real-time data, enabling adaptive and efficient resource management. By balancing proactive foresight and reactive adaptability, PreNS addresses fluctuating network conditions and the rigidity of static optimization. Experimental evaluations on a realistic 5G testbed demonstrate that PreNS improves resource utilization by approximately 14%, reduces latency by 20%, and enhances QoS satisfaction by 5%, compared to state-of-the-art methods—demonstrating its potential for efficient, scalable resource allocation in future wireless networks.