Bandgap gradient is a proven approach for improving the open-circuit voltages (VOCs) in Cu(In,Ga)Se2 and Cu(Zn,Sn)Se2 thin-film solar cells, but has not been realized in Cd(Se,Te) thin-film solar cells, a leading thin-film solar cell technology in the photovoltaic market. Here, we demonstrate the realization of a bandgap gradient in Cd(Se,Te) thin-film solar cells by introducing a Cd(O,S,Se,Te) region with the same crystal structure of the absorber near the front junction. The formation of such a region is enabled by incorporating oxygenated CdS and CdSe layers. We show that the introduction of the bandgap gradient reduces the hole density in the front junction region and introduces a small spike in the band alignment between this and the absorber regions, effectively suppressing the nonradiative recombination therein and leading to improved VOCs in Cd(Se,Te) solar cells using commercial SnO2 buffers. A champion device achieves an efficiency of 20.03% with a VOC of 0.863 V.
Two-terminal tandem perovskite (PK) cells are considered a promising option for future photovoltaic (PV) market due to the rapid improvements in their power conversion efficiencies. However, their large-scale adoption requires a better understanding on the energy performance of these PVs. In this paper, the life-cycle energy consumptions of two-terminal tandem solar cells consisting of lead-based PK top cells prepared on bottom cells of copper indium gallium selenide, copper zinc tin selenide, and monocrystalline silicon are evaluated. The energy payback time (EPBT) and the energy return on invested (EROI) are the two useful metrics for examining the energy generation performance of PV systems. EPBTs of the current state-of-the-art devices range from 7 months to 12 months, while the EROI of the cells is in the reverse order as the EPBT and ranged between 5.2 and 9.2. These two energy indicators of tandem devices are expected to improve as the tandem PV technologies mature, with an EBPT as low as ∼27 day (0.9 month) and the EROI as high as 105 for high-efficiency long-lifetime devices.
We describe a general approach for protecting metal halide perovskite solar cells against degradation in high-humidity environments using a sputtered barrier coating. A SiO2 protective layer, applied to two different types of perovskite solar cells, was deposited without strongly impacting the initial device performance. The degradation of the cells was imaged in real time using laser beam-induced current (LBIC) measurements in an accelerated test. We show that SiO2 barrier films can improve the tolerance of the devices to extreme humidity conditions and extend lifetimes by a factor of ∼60 when a 45 nm SiO2 barrier layer is applied to CH3NH3PbI3 and by a factor of ∼600 when a 300 nm barrier is applied to a triple-cation perovskite material. The LBIC data revealed that the approach promises protection against degradation initiation at the edges of scribed lines, which will be necessary for the fabrication of monolithically integrated modules.