3 December 2019 in IEEE Transactions on Antennas and Propagation
This paper presents the design, optimization, fabrication, and characterization of an electronically steerable transmitarray with 2 bits of phase quantization per unit cell. The proposed transmitarray operates in linear polarization at Ka-band and is composed of 14W14 reconfigurable unit-cells. Four p-i-n diodes are integrated on each unit-cell to control the radiated field phase distribution across the transmitarray aperture. The prototype demonstrates experimentally pencil beam scanning over a 120W120-degree window, a maximum gain at broadside of 19.8 dBi, and a 3-dB fractional bandwidth of 16.2%.
11 October 2017 in IEEE Transactions on Antennas and Propagation
Dual-band transmitarray antennas are demonstrated at Ka-band with the capability of forming independent linearly polarized beams with a given polarization in each frequency band, while sharing the same radiating aperture. The proposed three-layer unit-cell is based on identical narrow microstrip patches printed on both receiving and transmitting layers and connected by a metallized via hole. The metal layers are printed on two identical substrates bonded with a thin film, and the designed unit-cell exhibits a 180° phase resolution (i.e., 1-b phase quantization). The dual-band dual-polarized property of the transmitarray is achieved by interleaving unit-cells operating in the down-link and up-link frequency bands. Four different prototypes are characterized to demonstrate the relevance of the proposed concepts. A good agreement is obtained between the radiation patterns, gain curves, and cross-polarization levels measured and computed in both frequency bands and polarizations.
29 February 2016 in IEEE Transactions on Antennas and Propagation
Dual linearly polarized transmitarray antennas with wideband performance are investigated in X-band. Their designs are based on unit-cells with bandpass response. Their structures consist of three conducting layers printed on two identical dielectric substrates glued with a bonding film. Detailed experimental results demonstrate excellent polarization independence, with expected performance and properly preserved radiation characteristics for each polarization. The measured data are in excellent agreement with full-wave simulation results.
21 May 2018 in IEEE Antennas and Wireless Propagation Letters
This letter presents the simulation, optimization and demonstration of a collimated-beam and a quad-beam transmitarray operating at Ka-band. Both transmitarrays are based on a 3-bit unit-cell implementing both phase-shift and linear-to-circular polarization conversion functions. The collimated-beam transmitarray presents a measured gain of 33.8 dBi (corresponding to an aperture efficiency of 51.2%) and a 3-dB gain bandwidth larger than 15.9%. The quad-beam transmitarray phase distribution has been optimized by a genetic algorithm code coupled with an analytical tool. The array is designed to radiate four beams at $\theta0=\pm25^{\circ}$ in the horizontal and vertical planes at the frequency of optimization.
26 April 2019 in IEEE Antennas and Wireless Propagation Letters
We present here a design of metal-only unit-cell for transmitarray antenna (TA) applications at Ka-band, and we introduce a solution to reduce the total number of layers by polarization manipulation. The corresponding unit-cell is based on a C-shaped slot radiating element, fabricated by laser ablation on a thin metal sheet and operating in linear polarization. Thanks to the rotation of the slot, polarization of radiated wave can be manipulated to any arbitrary direction, particularly in the orthogonal direction of the incident wave. By combining two unit-cells with opposite rotation directions, we show that metal-only unit-cells made of three layers can be obtained, with a 360° phase shift and insertion loss lower than 1 dB. This unit-cell with reduced profile is used to design several TA prototypes with a main beam direction pointing up to 50°. The experimental results demonstrate an 11% 3-dB fractional gain bandwidth with an aperture efficiency around 50% for a beam at boresight.
21 October 2020 in IEEE Transactions on Antennas and Propagation
This paper presents the experimental validation of independent and wide beam scanning with a dual-band transmitarray antenna (TA) in Satcom up- and down-links at Ka-band. The TA consists of two sub-arrays, one operates in the down-link with central frequency at 19.5 GHz, while the other one operates in the up-link centered at 29 GHz. Both sub-arrays share a common radiating aperture to obtain compact configuration. The TA layout is made of 1-bit unit-cells and its design relies on the bifocal technique to extend the beam scanning capability. The proposed bifocal prototype includes 1500 up-link unit-cells in 30×50 matrix and 1581 down-link unit-cells arranged in 31×51 rectangular lattice. The 1D scanning is validated by displacing the feed horn along one direction. We show that the TA beam can be scanned in a ±40° and ±30° independently in each band while keeping a very low scan loss (< 2 dB).