7 February 2023 in IEEE Transactions on Power Delivery
The growing use of nonlinear devices has raised the harmonic levels in power systems. A challenging power quality problem is determining how much each installation contributes to the harmonic voltages measured at a point of common coupling so that the costs of mitigation solutions can be fairly divided. Currently, there is still no practical worldwide established method to solve this problem. The IEEE PES Task Force on Harmonic Modeling and Simulation developed a Benchmark Test System to support this line of research. Therefore, this study uses the IEEE PES Benchmark to evaluate and compare harmonic contribution determination (HCD) methods. To do so, this Benchmark Test System was implemented in MATLAB/Simulink and used to test five HCD methods proposed in the literature under different network operating cases, including cases with background distortions and resonance. The methods are the Voltage Harmonic Vector Method, the IEC Method, the Dominant Impedance Method, the Capacitor Switching Method, and the Harmonic Current Injection Method. It has been found that the HCD methods generally led to similar contribution percentages, proving the convergence of the methodologies. In addition, an analysis of the methods' sensitivity to input measurement errors was done.
12 January 2016 in Ciência & Engenharia
26 October 2021 in International Transactions on Electrical Energy Systems
One of the greatest challenges found in power quality has been, and still is, the establishing of a reliable noninvasive method for quantifying the harmonic contributions of an electric utility and a consumer at the point of common coupling (PCC). This difficulty arises from the fact that the harmonic distortions measured on the PCC are unidentifiable mixtures from both parties. Currently, some work has focused on exploring the use of blind source separation (BSS) techniques to promote the sharing of harmonic responsibilities in a noninvasive way. However, the usage of this methodology is very recent and still requires thorough evaluations, not only from the point of view of the BSS techniques available in the literature, but also from the perspective of the electrical power systems and the nature of their loads. Thus, seeking to contribute to the consolidation of the use of BSS techniques in the sharing of harmonic responsibilities, this work aimed to investigate the impact of the variation of harmonic current sources on the accuracy of BSS methods. In addition, three algorithms suitable for complex-valued signals were evaluated computationally and experimentally; the results obtained computationally were compared with the results of the method based on the covariance characteristic of the random vectors, and the experimental results was compared to that obtained through an invasive procedure.