LUIZ CARLOS GOMES FREITAS

Prof. Dr. LUIZ CARLOS GOMES FREITAS

Federal University of Uberlândia, Uberlândia, Minas Gerais, Brazil
orcid

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 March 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
MJMarcus Evandro Teixeira Souza Junior
Marcus Evandro Teixeira Souza Junior
LUIZ CARLOS GOMES FREITASLUIZ CARLOS GOMES FREITAS
LUIZ CARLOS GOMES FREITAS
This work presents and discusses the application of power electronics for the integration of several distributed generation sources, as well as those related to it, the microgrids and the smart grids, to the power sector. Trends and challenges are addressed for the area of study and an embracing overview of the main technologies and techniques is presented for future investigation. As there are many power electronics devices available for employment, in each one of these crucial, modern, sustainable electrical systems, it is important for students, researchers and professionals to understand and compare the state of the art of them all, for the right choice in their respective uses. These apparatuses not only allow grid matching, but also provide new functions that enhance these artifacts’ operations, and of the entire power system. Thus, in this paper, the relationship between power electronics and distributed generation is detailed, with the role and classification of each static converter for the improved operation of wind power, photovoltaic systems, fuel cells, small hydro and microturbines exposed. While the first two are more widely covered in the literature, the last three are rarely discussed and differentiated, in terms of their power electronics interfaces. Then, the same is made for microgrids and smart grids, also scarcely approached in other works, with regard to the characteristics of the power converters applied, confirming their superior performances with the use of power electronics. Finally, conclusions are given.

1 August 2011 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HAHenrique José Avelar
Henrique José Avelar
WPWanderley Alves Parreira
Wanderley Alves Parreira
JVJoão Batista Vieira
João Batista Vieira
LUIZ CARLOS GOMES FREITASLUIZ CARLOS GOMES FREITAS
LUIZ CARLOS GOMES FREITAS
ECErnane Antônio Alves Coelho
Ernane Antônio Alves Coelho
This paper presents a state equation model of a single-phase pulsewidth modulation inverter connected to the grid, using frequency-active power and voltage-reactive power droops, including an extra phase shift loop. The influence of the control parameters on the system's behavior can be studied using the proposed state equation model, which was obtained from the small-signal analysis. The model's results are compared with numerical simulations of the nonlinear system to verify their accuracy. Comparisons are also made with experimental data reported in the literature.

12 September 2022 in IEEE Access
Verified
Journal Article
Open access
MSMarcus Evandro Teixeira Souza
Marcus Evandro Teixeira Souza
LUIZ CARLOS GOMES FREITASLUIZ CARLOS GOMES FREITAS
LUIZ CARLOS GOMES FREITAS
Microgrids are relatively smaller but complete power systems. They incorporate the most innovative technologies in the energy sector, including distributed generation sources and power converters with modern control strategies. In the future smart grids, they will be an essential element in their architecture. Their potential to offer many economic, social and environmental services through advanced electrical techniques has led to a growing interest in the theme. Although the islanding condition is a very important feature of microgrids, only with the implementation of grid connection and seamless transition they will demonstrate their full capacity. However, there are still many questions surrounding these operation modes and this paper tries to answer part of them. To do that, several aspects in the field are approached. The history and late development of microgrids are revisited. The main concepts are presented. The islanded mode is revised, since it is intrinsically linked to the other working states of the microgrid. The requirements for the interconnection of microgrids to an external grid are discussed. The operation elements are also analyzed. A crucial part of the grid-connected microgrids and their seamless transfer conditions, the control methods found in the literature are extensively reviewed. The paper is concentrated in the analysis of control methods for AC microgrids and AC power systems, therefore, it does not enter in detail or investigates profoundly the topologies applied in the power electronics structures nor DC microgrids and DC power systems.

8 September 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
FMFernando Cardoso Melo
Fernando Cardoso Melo
LGLucas S. Garcia
Lucas S. Garcia
ECErnane A. A. Coelho
Ernane A. A. Coelho
VFValdeir J. Farias
Valdeir J. Farias
LUIZ CARLOS GOMES FREITASLUIZ CARLOS GOMES FREITAS
LUIZ CARLOS GOMES FREITAS
Microinverters for photovoltaic (PV) modules can improve the energy generation by reducing the effects of shading, since the energy harvesting of each PV module can be controlled individually. In this context, this paper presents a topology of single-stage transformerless grid-connected boost microinverter. It promotes high voltage gain without using a preregulator circuit or a high/low-frequency transformer. A 500 W laboratory prototype was implemented and experimental tests were carried out so that the proposed microinverter was evaluated in a grid-connected PV system. Experimental analysis was performed in order to corroborate the theoretical approach and to verify the effectiveness of the proposed modified Perturb and Observe “Gama” maximum power point tracking technique and the proportional-resonant (P-Res) grid current controller under different irradiation conditions and under partial shading.

1 July 2006 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LUIZ CARLOS GOMES FREITASLUIZ CARLOS GOMES FREITAS
LUIZ CARLOS GOMES FREITAS
Marcelo SimoesMarcelo Simoes
Marcelo Simoes
CCC.A. Canesin
C.A. Canesin
A novel hybrid three-phase rectifier is proposed. It is capable to achieve high input power factor (PF) and low total harmonic input currents distortion (THD/sub I/). The proposed hybrid high power rectifier is composed by a standard three-phase six-pulse diode rectifier (Graetz bridge) with a parallel connection of single-phase Sepic rectifiers in each three-phase rectifier leg. Such topology results in a structure capable of programming the input current waveform and providing conditions for obtaining high input power factor and low harmonic current distortion. In order to validate the proposed hybrid rectifier, this work describes its principles, with detailed operation, simulation, experimental results, and discussions on power rating of the required Sepic converters as related to the desired total harmonic current distortion. It is demonstrated that only a fraction of the output power is processed through the Sepic converters, making the proposed solution economically viable for very high power installations, with fast investment payback. Moreover, retrofitting to existing installations is also feasible since the parallel path can be easily controlled by integration with the existing dc-link. A prototype has been implemented in the laboratory and it was fully demonstrated to both operate with excellent performance and be feasibly implemented in higher power applications.

23 January 2024 in IEEE Access
Verified
Journal Article
Open access
ÊRÊnio Resende
Ênio Resende
Marcelo SimoesMarcelo Simoes
Marcelo Simoes
LUIZ CARLOS GOMES FREITASLUIZ CARLOS GOMES FREITAS
LUIZ CARLOS GOMES FREITAS
The emergence of microgrids and the increasing adoption of Distributed Generation Systems (DGS) have created an opportunity to replace traditional fossil fuels with renewable resources. Such a shift poses security and power quality challenges that must be addressed by academics and industrial research paradigms. Unintentional islanding is an important security concern, as it can result in power quality degradation, electrical hazards, and equipment damage. To address this problem and find efficient solutions, many anti-islanding techniques to detect and eliminate the phenomenon can be found in the specialized literature. These solutions can be classified as passive, active, remote, hybrid, or based on machine learning and signal processing techniques. In this context, this paper provides a comprehensive review of existing anti-islanding methods, highlighting their importance in preventing dangerous situations. The review includes a detailed analysis of advantages and limitations found for each method, as well as its suitability for practical applications. The goal is to provide a valuable resource for researchers and practitioners in the field of distributed power systems, enabling them to choose the most appropriate anti-islanding method for their specific needs. Overall, this paper aims to address the challenges posed by unintentional islanding and promote the adoption of renewable energy resources for a more sustainable future.